Catalogue 9 - STAUFF Filtration Technology
www.stauff.com/9/en/#55 C 55 Catalogue 9 § Edition 02/2023 Pressure Filters HI-D024 Product Description The differential pressure indicator HI-D024 is a microprocessor controlled pressure switch with two alarm outputs for pre-alarm and shut-off. It is used to monitor the capacity of oil filters in oil-circulating systems. For this purpose, a microprocessor- controlled pressure sensor observes the dynamic pressure in front of the filter element or the differential pressure at the filter element. The pressure increases depending on the cumulative clogging of the filter. To avoid false alarms due to high viscosity during start-up, the device is equipped with a temperature control and time delay function. Technical Data Connection Thread G1/2 Operating Pressure Max. 420 bar / 6000 PSI Temperature Range -20 °C ... +80 °C / -4 °F ... +176 °F ready for operation > 20 °C / 68 °F Materials Body: Brass Sealing Material: NBR (Buna-N®) Protection Rating IP 67 Rated Capacity Max. 0,2 A, 24 V DC Operating Voltage 24 V DC Alarm outputs (electrical) 3,8 + 10% bar / 55.1 +/- 10% PSI ∆p = 75% (Pin 4) 5 + 10% bar / 72.5 +/- 10% PSI ∆p = 100% (Pin 2) Clogging Indicators Technical Data Order Code a Type Clogging Indicator for Pressure Filters HI b Indicator Type c Thermostop Without thermostop none With thermostop T f Differential Pressure Setting 1,72 bar / 25 PSI B1.7 2,0 bar / 29 PSI B2.0 2,5 bar / 36.3 PSI B2.5 3,0 bar / 43.5 PSI B3.0 5,0 bar / 72.5 PSI (standard option) B5.0 7,0 bar / 101.5 PSI B7.0 Note: Bold types identify standard option g Design Code Only for information X electrical E Electrical, Deutsch plug ED Visual-electrical P Rated Capacity High voltage peaks occur when inductive loads are switched off. Protective circuitry should be employed to reduce contact burnout. Voltage V Resistive Load A Inductive Load A 110 V AC 5A 3A 230 V AC 3A 2A 24 V DC 4A 3A Max. Load 24 V AC ± 10% 1A d Voltage (only for Code P) 24 V DC 024 110 V AC 110 230 V AC 230 e Sealing Material NBR (Buna-N®) B FKM (Viton®) V EPDM E Order Code a a Type Clogging Indicator for Pressure Filters HI-D-024-B-B5.0 HI-D-024-B-B5.0 Double Visual-electrical Clogging Indicator Alarm outputs (visual) Range (%FS) Color T>T* (Thermo-stop) 0-50 green 50-75 yellow 75-100 orange 100 red (flashing) T<T* (Thermo-stop) 0-100 blue Dimensional drawings: All dimensions in mm/in. T= Temperature T*= 20 °C / 68 °F v G1/2 1.04 26,5 1.7 44 4 75% 2 100% 3 GND 1 2 3 4 LED + Switch M12 + 1 +24 V DC HI - P T 230 - B - B5.0 / X a bc f g ed Electrical Plug according to DIN-EN 175301-803 A (DIN 43650-A). Screwed cable gland PG11 Protection rating (DIN 40050) IP65 Both NO and NC contacts are available in the switch, rated capacity: see chart below Deutsch plug Note: The customer / user carries the responsibility for the electrical connection. Alarm outputs HI-E: electrical HI-ED: electrical HI-P: visual-electrical (LED red and green) Materials Body: Stainless Steel
RkJQdWJsaXNoZXIy ODUyNzU=