Catalogue 7 - STAUFF Test

A 38 www.stauff.com/7/en/#38 Thread Dimensions Version Weight Ordering Codes ( mm / in ) ( kg / lbs ) ca. (Standard Option) T h per 100 M16 x 2 39 A 6,20 SAD-15/20-W3 1.54 13.64 S12 1 39 A 5,40 SAD-15/12-W3 1.54 11.88 Plug in 37 B 3,20 SAD-15/10-W3 1.46 7.05 Test Adaptor SAD-15 Version A Version B Ordering Codes * SAD *-15/20* -B * -W3 * Type Test Adaptor SAD * Connection Type Version A -15/20 Version A -15/12 Version B -15/10 * Seal Material FKM (Viton®) none EPDM -E * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2A - -W4 1.4305 (AISI 303) Stainless Steel V4A - -W5 1.4571 (AISI 316 Ti) 1 Special thread: buttress thread S12,65 x1,5 Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Thread Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs ) ca. (Standard Option) T h Hex A per 100 G1/4 54 19 7,40 SMA-15-G1/4-B-OR-W3 2.13 .75 16.28 G1/2 64 27 12,20 SMA-15-G1/2-B-OR-W3 2.52 1.06 26.84 1/4 NPT 54 19 7,80 SMA-15-1/4NPT-W3 2.13 .75 17.16 1/2 NPT 64 27 14,5 SMA-15-1/2NPT-W3 2.52 1.06 31.97 G1/4 41 19 5,60 SMD-15-G1/4-B-OR-W3 1.61 .75 12.32 G1/2 51 27 9,90 SMD-15-G1/2-B-OR-W3 2.01 1.06 21.78 1/4 NPT 41 19 5,60 SMD-15-1/4NPT-W3 1.61 .75 12.32 1/2 NPT 51 27 13,50 SMD-15-1/2NPT-W3 2.01 1.06 29,76 Through hole Ø 18 (.71) Gauge Adaptor SMA-15 Direct Gauge Adaptor SMD-15 Ordering Codes *SMA* -15 *-G1/4* -B *-OR* -W3 * Type Gauge Adaptor SMA * Series STAUFF Test 15 -15 (Connection Thread M16x1,5) * Thread acc. to dimension table -G1/4 * Seal Material NBR (Buna-N®) -B FKM (Viton®) -V EPDM -E Seal Type without O-ring none * Seal Type with O-ring -OR * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2A - -W4 1.4305 (AISI 303) Stainless Steel V4A - -W5 1.4571 (AISI 316 Ti) Standard option - SMA-15: With Hexagon Lock Nut. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Snubber on request. Gauge Adaptor SMA-15 Direct Gauge Adaptor SMD-15 Dimensional drawings: All dimensions in mm (in). Catalogue 7 § Edition 06/2023 Test Couplings h M16x1,5 T M16x1,5 h M16x1,5 h T max. 12 SW A SW 19 (Hex .75) (Hex A) (max. .47) h M16x1,5 T SW A (Hex A)