Catalogue 2 - STAUFF Connect

196 www.stauff.com/2/en/#196 L Swivel Elbow Type FI-DGWE-...-R-WD § Series L / S Whitworth Parallel Pipe Thread (BSPP) Profile Sealing Ring Ordering Codes * FI-DGWE * -10 * L * R * -WD * -B * -W66 * -MS * Swivel Elbow FI-DGWE * Outside Tube Diameter D1 (in mm) -10 * Series Light Series L Heavy Series S * Thread Type Whitworth Parallel Pipe Thread (BSPP) R If required, please indicate special sizes, e.g. R1/8! * Seal Type Profile Sealing Ring -WD * Seal Material NBR (Buna-N®) -B FKM (Viton®) -V * Material Code Steel, zinc-plated and thick-film-passivated -W66 Please contact STAUFF for alternative materials and surface finishings. * Assembling / Kitting Fitting body only — Fitting body supplied with cutting ring and union nut -MS Fitting body supplied with soft-sealing cutting ring -MSV and union nut Series Tube OD PN Dimensions Torque Weight Ordering Codes 3 mm bar mm N·m kgca. D1 T D2 i1 L1 L1 1 L2 L3 L4 S1 S2 S3 Thread T per 100 L 6 250 G 1/8 14 8 23 31 16 40 21 27 19 14 18 16,00 FI-DGWE-06LR-WD-B-W66 6 250 G 1/4 19 12 23 27 16 41 22 27 19 14 40 16,8 FI-DGWE-06LR1/4-WD-B-W66 8 250 G 1/4 19 12 25 33 18 46 25 30 22 17 40 23,00 FI-DGWE-08LR-WD-B-W66 10 250 G 1/4 19 12 26 34 19 46 25 30 22 19 40 23,40 FI-DGWE-10LR-WD-B-W66 10 250 G 3/8 22 12 27 35 20 48 27 32 24 19 80 27,50 FI-DGWE-10LR3/8-WD-B-W66 12 250 G 3/8 22 12 27 35 20 48 27 32 24 22 80 28,00 FI-DGWE-12LR-WD-B-W66 12 250 G 1/2 27 14 29 37 22 55 30 36 27 22 110 38,80 FI-DGWE-12LR1/2-WD-B-W66 15 250 G 1/2 27 14 32 40 25 59 33 40 32 27 110 52,80 FI-DGWE-15LR-WD-B-W66 18 160 G 1/2 27 14 32 41 24,5 59 33 40 32 32 110 52,60 FI-DGWE-18LR-WD-B-W66 22 160 G 3/4 32 16 36 45 28,5 66 35 45 36 36 180 72,00 FI-DGWE-22LR-WD-B-W66 28 100 G 1 40 18 41 50 33,5 78 41 55 41 41 300 126,70 FI-DGWE-28LR-WD-B-W66 35 100 G 1 1/4 50 20 48 59 37,5 92 51 65 50 50 470 208,00 FI-DGWE-35LR-WD-B-W66 42 100 G 1 1/2 55 22 53 65 42 102 56 75 55 60 540 294,00 FI-DGWE-42LR-WD-B-W66 6 400 G 1/4 19 12 25 33 18 41 22 27 19 17 50 17,40 FI-DGWE-06SR-WD-B-W66 S 8 400 G 1/4 19 12 25 33 18 41 22 27 19 19 50 18,00 FI-DGWE-08SR-WD-B-W66 10 400 G 3/8 22 12 27 36 19,5 46 25 30 22 22 80 24,20 FI-DGWE-10SR-WD-B-W66 12 400 G 3/8 22 12 28 37 20,5 48 27 32 24 24 80 28,80 FI-DGWE-12SR-WD-B-W66 14 400 G 1/2 27 14 32 42 24 55 30 36 27 30 120 38,00 FI-DGWE-14SR-WD-B-W66 16 400 G 1/2 27 14 34 44 25,5 59 33 40 32 30 120 52,80 FI-DGWE-16SR-WD-B-W66 20 250 G 3/4 32 16 38 49 27,5 66 35 45 36 36 180 74,00 FI-DGWE-20SR-WD-B-W66 25 250 G 1 40 18 45 57 33 78 41 55 41 46 300 128,00 FI-DGWE-25SR-WD-B-W66 30 250 G 1 1/4 50 20 52 65 38,5 92 51 65 50 50 470 214,00 FI-DGWE-30SR-WD-B-W66 38 250 G 1 1/2 55 22 59 74 43 102 56 75 55 60 560 298,00 FI-DGWE-38SR-WD-B-W66 Spare Parts / Accessories Profile Sealing Ring Type WDG Page 238 Connecting Parts Cutting Ring Type FI-DS Page 28 Soft-Sealing Cutting Ring Type FI-WDDS Page 29 Support Sleeve Type FI-VH Page 31 STAUFF Form EVO Sealing Ring Type FI-FD Page 32 Union Nut Type FI-M Page 33 37° Flared Tube Fitting Set Type FI-AB Page 37 1 Approx.imate dimension in assembled condition. 2 Weight excluding cutting ring and union nut. 3 Standard scope of delivery: Fitting body only. Standard seal material is NBR (Buna-N®). Male stud acc. to ISO 1179-2 (Type E) Port acc. to ISO 1179-1 Torque recommendations for Steel mating material. Maximum Number of Revolutions per Minute for Permanent Operation Higher number of revolutions per minute possible when used temporarily / non-permanently. Recommendations for use with hydraulic oil at a static working pressure not exceeding 200 bar. Dimension S1 (mm) 27 30 32 36 40 45 55 65 75 Revolutions Per Minute 6 3 3 1 0,6 0,5 0,4 0,2 0,2 Catalogue 2 § Edition 03/2024 Swivel Fittings Male threaded studs were designed for female threaded ports in components made of steel. For applications with components made of softer mating materials (e.g. Alumi- nium), the use of connectors with additionally rolled male threads is recommended. Please contact STAUFF prior to the assembly for further information.