Catalogue 2 - STAUFF Connect

www.stauff.com/2/en/#157 157 I Straight Male Stud Standpipe Fitting Type FI-EGE-...-M § Series L / S Metallic Sealing Edge Metric Parallel Thread L1 D1 D2 S1 S2 T i Series Tube OD PN (PB) Dimensions Torque Weight Ordering Codes 2 mm bar mm N·m kgca. D1 Thread T D2 i1 L1 S1 S2 Thread T per 100 1 L 6 PN315 M 10 x 1 3,5 8 24,5 14 14 950 2,54 FI-EGE-06LM-W3-SV 8 PN315 M 12 x 1,5 5,5 12 26,5 17 17 35 4,34 FI-EGE-08LM-W3-SV 10 PN315 M 14 x 1,5 7 12 27,5 19 19 55 5,29 FI-EGE-10LM-W3-SV 12 PN315 M 16 x 1,5 9 12 30,5 22 22 80 7,95 FI-EGE-12LM-W3-SV 15 PN315 M 18 x 1,5 11 12 31,5 24 27 100 10,25 FI-EGE-15LM-W3-SV 18 PN315 M 22 x 1,5 14 14 31,5 27 32 170 14,82 FI-EGE-18LM-W3-SV 22 PN160 M 26 x 1,5 18 16 32,5 32 36 230 19,57 FI-EGE-22LM-W3-SV 28 PN160 M 33 x 2 23 18 35 41 41 400 28,94 FI-EGE-28LM-W3-SV 35 PN160 M 42 x 2 29,5 20 42,5 50 50 700 47,56 FI-EGE-35LM-W3-SV 42 PN160 M 48 x 2 35,5 22 46,5 55 60 900 67,00 FI-EGE-42LM-W3-SV S 6 PB630 M 12 x 1,5 3,5 12 27 17 17 60 4,51 FI-EGE-06SM-W3-SV 8 PB630 M 14 x 1,5 4,5 12 29,5 19 19 90 6,30 FI-EGE-08SM-W3-SV 10 PB630 M 16 x 1,5 6,5 12 32 22 22 120 8,79 FI-EGE-10SM-W3-SV 12 PB630 M 18 x 1,5 7,5 12 34 24 24 190 11,24 FI-EGE-12SM-W3-SV 14 PB630 M 20 x 1,5 9,5 14 36,5 27 27 280 15,53 FI-EGE-14SM-W3-SV 16 PB400 M 22 x 1,5 11,5 14 37 27 30 300 17,47 FI-EGE-16SM-W3-SV 20 PB400 M 27 x 2 15,5 16 43 32 36 420 27,28 FI-EGE-20SM-W3-SV 25 PB400 M 33 x 2 18 18 48 41 46 600 51,00 FI-EGE-25SM-W3-SV 30 PB400 M 42 x 2 23,5 20 51 50 50 700 69,54 FI-EGE-30SM-W3-SV 38 PB315 M 48 x 2 29 22 60 55 60 900 99,38 FI-EGE-38SM-W3-SV Ordering Codes * FI-EGE * -10 * L *M* -W3 * -SV * Straight Male Stud Standpipe Fitting FI-EGE * Outside Tube Diameter D1 (in mm) -10 * Series Light Series L Heavy Series S * Thread Type Metric Parallel Thread M If required, please indicate special sizes, e.g. M12x1.5! * Material Code Steel, zinc/nickel-plated -W3 Please contact STAUFF for alternative materials and surface finishings. * Assembling / Kitting Fitting body assembled with cutting ring and union nut -SV on the standpipe 1 Weight including cutting ring and union nut on the standpipe. 2 Standard scope of delivery: Fitting body assembled with cutting ring and union nut on the standpipe. Male stud acc. to DIN 3852-1 (Form B) / ISO 9974-3 (Type B) Port acc. to DIN 3852-1 (Form X) / ISO 9974-1 Torque recommendations for Steel mating material. Please note: Standpipes are always factory- assembled with cutting rings and union nuts. The union nut assembled on the standpipe has to be tightened by only 1/12 a turn (equivalent to 30°) beyond the fixed point. 30° Catalogue 2 § Edition 03/2024 Standpipe Fittings Male threaded studs were designed for female threaded ports in components made of steel. For applications with components made of softer mating materials (e.g. Alumi- nium), the use of connectors with additionally rolled male threads is recommended. Please contact STAUFF prior to the assembly for further information.