Catalogue 2 - STAUFF Connect

156 www.stauff.com/2/en/#156 I Straight Male Stud Standpipe Fitting Type FI-EGE-...-R § Series L / S Ordering Codes * FI-EGE * -10 * L * R * -W3 * -SV * Straight Male Stud Standpipe Fitting FI-EGE * Outside Tube Diameter D1 (in mm) -10 * Series Light Series L Heavy Series S * Thread Type Whitworth Parallel Pipe Thread (BSPP) R If required, please indicate special sizes, e.g. R1/8! * Material Code Steel, zinc/nickel-plated -W3 Please contact STAUFF for alternative materials and surface finishings. * Assembling / Kitting Fitting body assembled with cutting ring and union nut -SV on the standpipe Whitworth Parallel Pipe Thread (BSPP) Metallic Sealing Edge L1 D1 D2 S1 S2 T i Series Tube OD PN (PB) Dimensions Torque Weight Ordering Codes 2 mm bar mm N·m kgca. D1 Thread T D2 i1 L1 S1 S2 Thread T per 100 1 L 6 PN400 G 1/8 3,5 8 24,5 14 14 25 2,50 FI-EGE-06LR-W3-SV 8 PN400 G 1/4 4,5 12 29,5 19 17 55 5,53 FI-EGE-08LR-W3-SV 10 PN400 G 1/4 7 12 27,5 19 19 55 5,11 FI-EGE-10LR-W3-SV 12 PN400 G 3/8 7,5 12 34 22 22 95 8,25 FI-EGE-12LR-W3-SV 15 PN400 G 1/2 11 14 32 27 27 185 13,02 FI-EGE-15LR-W3-SV 18 PN400 G 1/2 14 14 31,5 27 32 185 13,86 FI-EGE-18LR-W3-SV 22 PN250 G 3/4 18 16 32,5 32 36 250 19,98 FI-EGE-22LR-W3-SV 28 PN250 G 1 23 18 35 41 41 400 27,39 FI-EGE-28LR-W3-SV 35 PN250 G 1 1/4 29,5 20 42,5 50 50 670 47,03 FI-EGE-35LR-W3-SV 42 PN250 G 1 1/2 35,5 22 46,5 55 60 800 72,00 FI-EGE-42LR-W3-SV S 6 PB630 G 1/4 3,5 12 27 19 17 80 4,98 FI-EGE-06SR-W3-SV 8 PB630 G 1/4 4,5 12 29,5 19 19 80 5,98 FI-EGE-08SR-W3-SV 10 PB630 G 3/8 6,5 12 32 22 22 130 8,81 FI-EGE-10SR-W3-SV 12 PB630 G 3/8 7,5 12 34 22 24 130 10,01 FI-EGE-12SR-W3-SV 14 PB630 G 1/2 9,5 14 36,5 27 27 220 13,95 FI-EGE-14SR-W3-SV 16 PB400 G 1/2 11,5 14 37 27 30 220 16,94 FI-EGE-16SR-W3-SV 20 PB400 G 3/4 15,5 16 43 32 36 350 26,98 FI-EGE-20SR-W3-SV 25 PB400 G 1 18 18 48 41 46 700 49,03 FI-EGE-25SR-W3-SV 30 PB400 G 1 1/4 23,5 20 51 50 50 850 69,13 FI-EGE-30SR-W3-SV 38 PB250 G 1 1/2 29 22 60 55 60 1000 98,20 FI-EGE-38SR-W3-SV 1 Weight including cutting ring and union nut on the standpipe. 2 Standard scope of delivery: Fitting body assembled with cutting ring and union nut on the standpipe. Male stud acc. to DIN 3852-2 (Form B) / ISO 1179-4 (Type B) Port acc. to DIN 3852-2 (Form X) / ISO 1179-1 Torque recommendations for Steel mating material. Please note: Standpipes are always factory- assembled with cutting rings and union nuts. The union nut assembled on the standpipe has to be tightened by only 1/12 a turn (equivalent to 30°) beyond the fixed point. 30° Catalogue 2 § Edition 03/2024 Standpipe Fittings Male threaded studs were designed for female threaded ports in components made of steel. For applications with components made of softer mating materials (e.g. Alumi- nium), the use of connectors with additionally rolled male threads is recommended. Please contact STAUFF prior to the assembly for further information.