Catalogue 10 - STAUFF Hydraulic Accessories

A www.stauff.com/10/en/#19 19 Temperature Sensor Type TS-SNA/SNK-PT100 Dimensions A B 89 (3.50) 20 (.79) M12 M12 6 (.24) TS-SNA/SNK-PT100 Order Codes a Type Temperature Sensor PT100 TS-SNA/SNK-PT100 Connection Details and Electrical Functions Four-pin circular connector M12, A-coded, according to IEC 61076-2-101 SW16 (Hex .63) M12 6 (.24) 14 (.55) SW16 (Hex .63) 2 4 1 3 Pin Assignment 1 2 3 4 Dimensional drawings: All dimensions in mm (in). Dimensions (mm / in) A B In conjunction with Level Gauge SNA 43,5 45,5 1.71 1.79 In conjunction with Level Gauge SNK 51 38 2.01 1.50 In conjunction with Level Gauge SNKK 51 38 2.01 1.50 Technical Data Operating temperature range (for the connector area): -25°C ... +80 °C / -13°F ... +176 °F IP 68 protection rating: Dust tight and protected against powerful water jets; even immersion (beyond 1m / 3.28ft) in water is possible under defined conditions of pressure and time Accessories / Options Deutsch Adaptor Cable Please see page 20 for details. Characteristics Fluid temperature measurement in conjunction with STAUFF Level Gauges SNA, SNK and SNKK; Analysis of signals with required equipment, simply connect to your on board control unit or PLC. Installation Replaces the lower banjo bolt of the Level Gauge Available for bolt size M12 only Clearance hole: Ø13 mm / Ø.51 in Materials Metal parts (including all fluid-affected parts) made of Stainless Steel V2A (1.4305) Electrical Specifications Measuring temperature range: -40°C ... +150 °C / -40°F ... +302 °F Platinum measuring element PT100 according to DIN EN 60751, class A Accuracy: ±(0,15 K + 0,002 x | t | ) Max. contact current: 2,0mA Equipped with four-pin circular connector M12 with gold-plated contacts Power supply 20...32V DC Temperature Sensor with Direct Installation Set Type TS-SNA/SNK-PT100-T Characteristics Direct fluid temperature measurement without STAUFF Level Gauges SNA, SNK and SNKK; Analysis of signals with required equipment, simply connect to your on board control unit or PLC. Installation Direct installation to the outer wall of the hydraulic reservoir or gearbox Compact design and easy installation Clearance hole: Ø13 mm / Ø.51 in max. 8 (.31) Order Codes a Type Temperature Sensor PT100 TS-SNA/SNK-PT100 b Direct Adaptor Direct installation set including M12 screw nut, gasket, front ring and O-ring T c Sealing Material NBR (Buna-N®) (standard option) B FKM (Viton®) V EPDM E The direct installation set can also be used in conjunction with Thermo Switches TS (see page 18). Please contact STAUFF for further information. TS-SNA/SNK-PT100 - T - B 28 (1.10) 61 (2.40) SW18 (Hex .71) Materials Fluid-affected parts made of Stainless Steel V2A (1.4305) M12 screw nut made of Steel, zinc-plated Front ring made of Stainless Steel V2A (1.4305) O-ring and gasket made of NBR (Buna-N®) (standard option), FKM (Viton®) or EPDM Please see top of this page for Technical Details and Electrical Specifications for the Temperature Sensor. Accessories / Options Deutsch Adaptor Cable Please see page 20 for details. Catalogue 10 § Edition 01/2024 Fluid Level and Temperature Indicators