Catalogue 10 - STAUFF Hydraulic Accessories

A 18 www.stauff.com/10/en/#18 Thermo Switch Type TS Connection Details and Electrical Functions Types C and O: Industrial standard connector (contact gap: 9,4mm / .37in), similar to DIN EN 175301-803-C / ISO 6952 Types CD and OD: Five-pin circular connector M12, A-coded, according to IEC 61076-2-101 PG7 34 (1.34) Characteristics Fluid temperature measurement in conjunction with STAUFF Level Gauges SNA, SNK and SNKK Installation ƒ Replaces the lower banjo bolt of the Level Gauge ƒ Available for bolt size M12 only ƒ Clearance hole: Ø13 mm / Ø.51 in Materials ƒ Metal parts made of Stainless Steel (1.4305) ƒ Plastic parts made of glass-fibre reinforced Polyamide (PA) Electrical Specifications (General) ƒ Thermo switch is activated when the fluid temperature reaches the respective switching temperature ƒ Available with switching temperatures of +60 °C / +140 °F, +70 °C / +158 °F, +80 °C / +176 °F or +90 °C / +194 °F (with a switching tolerance of ±5 °C / ±9 °F and a hysteresis of 35 °C / 63 °F) ƒ Available as a break contact (normally closed) or make contact (normally open) ƒ Either equipped with industrial standard connector (Types C / O) or five-pin circular connector M12 (Types CD / OD) ƒ Thermo switch can be rotated by 360° to its final direction TS-SNA/SNK - O - 60 Order Codes a Type Thermo Switch TS for use with Level Gauges SNA, SNK and SNKK TS-SNA/SNK b Electrical Function Break contact, opens at switching temperature (normally closed); Equipped with standard connector 0 Break contact, opens at switching temperature (normally closed); Equipped with connector M12 OD Make contact, closes at switching temperature (normally open); Equipped with standard connector C Make contact, closes at switching temperature (normally open); Equipped with connector M12 CD c Switching Temperature Contact switches at +60 °C / +140 °F 60 Contact switches at +70 °C / +158 °F 70 Contact switches at +80 °C / +176 °F 80 Contact switches at +90°C / +194°F 90 Dial Thermometer with Probe Types T1/T2 Dimensions Dimensions (mm / in) A B In conjunction with Level Gauge SNA 39 76 1.54 2.99 In conjunction with Level Gauge SNK 47 68 1.85 2.68 In conjunction with Level Gauge SNKK 47 68 1.85 2.68 115 (4.53) M12 10 (.39) c 17 ( c .67) 48  (1.89) 38  (1.50) A B Characteristics Visual fluid temperature measurement in conjunction with STAUFF Level Gauges SNA, SNK and SNKK Nominal Sizes and Designs ƒ Probe lengths of 200mm / 7.87 in or 300mm / 11.81 in ƒ Scale diameter of 33mm / 1.30 in Please contact STAUFF for special versions. Scale Options ƒ Celsius scale of 0°C ... +100 °C ƒ Dual Celsius / Fahrenheit scale of up to +100 °C / +200 °F Materials ƒ Probe made of Stainless Steel V4A (1.4571) Technical Data ƒ IP 65 protection rating: Dust tight and protected against water jets T1: 200 (7.87) T2: 300 (11.81) 33 (1.30) 15,6 (.61) 25,5 (1.00) Electrical Specifications (Alternating Current) ƒ Maximum voltage: 250 V, 2,5 (1,6) A, 50 Hz ƒ Maximum current at 2000 operations: 4,0 A at cos j = 4,45 / 250 V, 135 °C ƒ Maximum current at 10000 operations: 2,5 A at cos j = 1,00 / 250 V, 150 °C ƒ Minimum current: 20 mA Electrical Specifications (Direct Current) ƒ Maximum voltage: 42 V 15,5 (.61) 18 (.71) M12 51 (2.01) Analog Signal 24VDC 0VDC Connection1notavailable Connection2notengaged 1 3 2 Thermostat Cable 2 Thermostat Cable 1 Ground Cable Dimensional drawings: All dimensions in mm (in). SW13 (Hex .51) Installation ƒ Requires a special banjo bolt (with internal M8 port for the dial thermometer with probe) to replace the lower standard banjo bolt of the Level Gauge ƒ Use suitable wrench SW13 (Hex .51) to fasten; turning on the body itself may damage the product Please note that Dial Thermometers with Probe can only be ordered in conjunction with Level Gauges SNA, SNK and SNKK. Please see page 14 to 17 for details. Catalogue 10 § Edition 01/2024 Fluid Level and Temperature Indicators Accessories / Options ƒ Deutsch Adaptor Cable Please see page 20 for details.

RkJQdWJsaXNoZXIy ODUyNzU=