Catalogue 9 - STAUFF Filtration Technology

www.stauff.com/9/en/#81 D 81 Catalogue 9 § Edition 02/2023 Return-Line Filters Dimensional drawings: All dimensions in mm/in. Return-Line Filters § Type RFA Electrical Clogging Switch The switch is used where an electrical signal is needed to indicate when the element needs to be changed. The switch can turn on a light, or shut the machine down, or any further function controlled by an electric signal. The switching pressure is 2,5 bar / 36.25 PSI and this allows the element to be changed before the bypass setting of 3 bar / 43.5 PSI is reached. Order Code Limit-Switch - G42NO - S - M10 - B2.5 a Type Limit-Switch b Connector Type c Plug Type M12Five-PinConnectoraccording to IEC61076-2-101 M12 AMP-Junior-Timer Plug A DEUTSCH Plug DT04-2P D Rubber boot S 90 degree Polyamide cap W (only for Connector Type G230) d Thread Type M10 x 1 M10 e Pressure Setting 2,5 bar / 36.3 PSI B2.5 Electrical Clogging Switch 42 V, NO G42NO Electrical Clogging Switch 42 V, NC G42NC Electrical Clogging Switch 110 V ... 230 V, two-way contact (only for Plug Type W) G230 a b c e d Standard type with plug connector and rubber cap. Available with DEUTSCH DT04-2P plug (industrial standard), AMP Junior Timer plug (industrial standard) and five-pin circular connector M12, A-coded, according to IEC 61076-2-101. Dimensions Plug Type W M12 S 3 1 1 2 A 61,5 (2.42) 9 (.35) M10x1 D 2 1 71 (2.80) 9 (.35) M10x1 60 (2.36) 9 (.35) M10x1 9 (.35) 76 (2.98) M10x1 9 (.35) 74 (2.91) M10x1 P 4 1 2 Note: The customer / user carries the responsibility for the electrical connection. Limit-Switch G42NO+NC Limit-Switch G230 Switching Capacity 100 VA 1000 VA Voltage 10…42 VAC/DC 10…250 VAC/DC Current 10mA…4A Switching Accuracy ± 0,5 bar at room temp. and new state Switching Frequency 200/min max. Pressure Ramp Rate ≤ 1 bar/ms Degree of Protection IP65 (plug type S and W), IP67 (plug type M12, A, D) Temperature Range -30°C … +100°C -40°C … +100°C Technical Data