Catalogue 8 - STAUFF Diagtronics

www.stauff.com/8/en/#61 C 61 Features & Options: LasPaC-II (General) Mobile - Compact and Convenient The LasPaC-II-P (Portable), the LasPaC-II-M (Mobile) and all its accessories are supplied in a light-weight rugged industrial case. This user-friendly portable case is waterproof and resistant against all common fluids. Accuracy - Twin-laser, 100% Coverage In all STAUFF laser particle counting devices, the fluid passes through the measuring cell and through a laser beam. The light from the laser is evaluated by a photo diode. As the fluid passes through the laser beam the amount of light changes. These changes are directly proportional to size of the particles, and the total volume of particles. In many other particle counters only part of the measuring cell is lighted by the laser, thus only a part of the total amount of particles are registered, and the result is projected. In contrast, the measuring cell of the LasPaC-II is completely examined, and all particles are registered. In addition to this, a second laser is used to analyze all particles sizes smaller than 6 μm (c) . Additionally, the integrated booster cylinder allows very precisely dosage of the test fluids. This ensures a very high accuracy with excellent repeatability. Functional - Calibration to ISO 11 171 The LasPaC-II devices are calibrated with ISO Medium Test Dust (MTD) based on the ISO 11 171:1999 calibration standard. STAUFF particle counters meet the new ISO 4406 cleanliness classification codes and provide results in the NAS 1638 and the SAE 4059 codes. For any Type of Application - Large Pressure Range A big advantage of the LasPaC-II devices is the wide pressure range: Low pressure measurements starting with 2 bar / 29 PSI and high pressure tests up to 400 bar / 5801 PSI result in reliable readings. Many other products available today require special add-on devices or pressure cartridges which need to be recharged for this. The test hoses, which are provided with the device, allow an easy connection to common test couplings M16 x 2 (STAUFF TEST 20 or comparable). Global Use - Variable Voltage Supply The external power supply unit provides most variable voltage ranges of 110 ... 240 V AC. European, UK and US plug adaptors ensure a worldwide applicability of the LasPaC-II. Always Secure - External Alarms The LasPaC-II-P devices offer the opportunity to define different alarm levels. It is possible to configure two separate contamination alarm levels (e.g. clean alarm level and dirt alarm level). When set, an alarm indicator is given to external devices (e.g. indicator light, offline-filter) if the alarm level is reached. Making the Connection - Downloading with RS-232 Interface and USB Adaptor The measured data can be downloaded onto any PC or laptop computer via the RS-232 interface or alternativley via a USB adaptor. The LasPaC-II software supports an easy download for data processing of the recorded measurements. Several diagrams are available and are automatically generated to offer a very clear arrangement of all data for analysis. Data can also be easily exported to Micro- soft Excel®. Always up-to-date - Integrated Clock An integrated rechargeable battery-operated clock provides the exact date and time which are shown on every printout. In addition, every download of measured data is marked with date and time as well. The precise time of measure- ment is documented on all printouts and for all data stored. Adaptable - Software Updates The RS-232 (or USB) interface ensures flexibility for future developments in terms of calibration, evaluation and output. Software updates can easily be installed onto the LasPaC-II devices. Cleanliness - High-Speed Flush Valve To ensure an accurate measurement is taken, the sensor must be cleaned before each test. The LasPaC-II achieves this by means of an electric operated flush valve. This valve can be opened on demand and between tests by simply depressing the flushing valve push button. The optimized design of the flush valve reduces the rinsing process to the minimum requirement, and ensures a quick restart of the next measurement. For all Applications - High Compatibility The LasPaC-II units are compatible with all Mineral Oil and Petroleum based fluids. Phosphate Ester (e.g. Skydrol®) and Water Glycol compatible devices are available upon request. Please contact STAUFF for details. More Oil Information - The Moisture/ Temperature Sensor The LasPaC-II also offers the option of adding an integral moisture / temperature sensor. This sensor measures the moisture content of the test fluids (displayed as relative humidity in RH %) and also indicates the current fluid temperature (in ˚C). Please note that the moisture/ temperature sensor is not compatible with Phosphate Ester (e.g. Skydrol®) and Water Glycol fluids. For further information please see on page 67. Optional - Bottle Sampling Unit Highly aerated fluids may lead to inaccurate results. Therefore a de-aeration facility has been incorporated into the optional bottle sampling units. Both sizes (110 ml and 500 ml) of the bottle sampling unit are delivered with an external power supply, and allow the user to properly condition the sample fluid prior to any measurements taken. For further information please see on page 66. Please note that the moisture/ temperature sensor as mentioned above does not work in conjunction with the bottle sampling unit. Scope of Delivery Each kit of a laser particle counter STAUFF LasPaC-II includes: 1x Laser particle counter STAUFF LasPaC-II 1x LasPaC-II-M / LasPaC-II-P: Waste hose 2 m / 3.65 ft 1x Pressure hose: 1,5 m / 2.67 ft 1x Waste bottle 1x External power supply including cable with European, UK and USA plug adaptors 1x RS-232 connecting cable, 1 m / 1.78 ft including RS-232 to USB converter 1x Software CD "LasPaC-II View" 1x User guide LasPaC-II 1x User guide LasPaC-II View 3x Thermal printer paper (only with LasPaC-II-P) Laser Particle Counter § Type LasPaC-II Catalogue 8 § Edition 05/2021 Oil Analysis Equipment