30 www.stauff.com/8/en/#30 B Catalogue 8 § Edition 05/2021 Hydraulic Testers Hydraulic Tester § Type PPC-PAD-plus Product Description The application options for hydraulic technology have increased significantly in all areas of drive and control systems. This trend is particularly evident in the fields of machinery, plant and automotive engineering. At the same time, hydraulics and electronics are becoming increasingly more interlinked. The new PPC-PAD-plus Multifunction Hand-Held Hydraulic Tester was developed especially for high demands and helps you to master these new challenges. It has never been so easy to track the complex processes in these industries through measurements, displays and analyses. Possible areas of application include preventive maintenance, commissioning, troubleshooting and machine optimisation. The increased requirements of these modern applications (e.g. more measuring points, longer cables and higher immunity to interference) have driven the further development of the CAN bus. The new PPC-PAD-plus has a 7" touch screen which makes operation very simple, even for complex tasks. The modular design also ensures best possible adaptation to a variety of different measuring tasks. Different input modules are offered for connecting additional sensors. These modules can easily be replaced by the user. There is an option of running the basic device with max. two additional modules in the device. The CAN Bus Sensors from STAUFF use the automatic sensor detection of the bus to allow an easy-to-install plug-and-play solution (max. CAN bus length 100 m/328 ft). The device is compatible with the existing sensors from the PPC Series. One great advantage is the option to generate a variety of different templates for recurring measuring tasks and saving these in so-called containers. Calling up these templates for recurring measuring tasks ensures interpretation and comparability of the results at all times. This can even go so far as executing these templates automatically at the press of a button. The newly integrated WIFI function also allows the device to be controlled via remote access, which means that executing measuring tasks and calling up the recorded data from a different location are no longer a challenge. The PPC-Analyze PC Software offers additional methods for analysis, control and remote service using LAN and USB connections. In combination with this software, the PPC-PADplus is a very user-friendly hydraulic tester that is suitable for all types of diagnostic applications. Technical Data (for basic device) Inputs/Outputs CAN sensor inputs: 2 CAN bus networks, each with 24 STAUFF CAN bus channels. Alternatively on CAN Y with up to 5 third-party CAN open sensors. Baud rate adjustable for third-party CAN. 24 V DC power supply/max. 250 mA. Mixed operation of STAUFF CAN and third-party CAN within one CAN bus line not possible. Internal terminating resistor 120 Ω. Supports CAN 2.0 A/CAN 2.0 B Sampling rate: 1 ms = 1000 measured values/s Plug-in connection: M12x1; 5-pin with SPEEDCON®, integrated connector Digital input/output and frequency input: Dual assignment input that can be used either as DIGITALIN and DIGITAL-OUT, or two frequency inputs are provided through switchover. Also possible as detection of direction of rotation. Connection: M12x1 SPEEDCON® female (5-pin) Input: Galvanically isolated Power supply: 24 V DC, 80 mA Input signals: Frequency (0 Hz…20 kHz) Level/threshold: Active low: 0...1.4 V, Active high: 3...30 V Accuracy: ≤ ±0.1% Input module slots: Flexible addition of up to 2 modules Product Features (for basic device) Portable multifunction hand-held tester Measuring, monitoring and analysis of pressure, temperature, volumetric flow rate and mass flow rate Measurement recording with a resolution of up to 1 ms Measurement and display of over 50 channels Sensor inputs can be expanded with additional input modules 2 frequency inputs for connecting third-party sensors or digital inputs/outputs 7" touch display, suitable for operation with gloves, robust 3 mm glass, resolution 800 x 480 pixels Connection of third-party CAN open sensors possible Analogue input module with galvanic isolation available Display of measured values: numerical, bar graph, pressure gauge, points, curve diagram Saving and loading project templates Defining of quick values possible (green, yellow, red) Memory for up to 1 billion measured values The measured data can be recorded (automatically), saved and analysed with the PPC-Analyze PC Software over a LAN, WIFI or USB connection. Max. CAN bus length: 100 m/328 ft Touch Display Size/resolution: 7", 800 x 480 pixels Brightness: 450 cd. Can be operated with gloves Calculation Channels Number: 4 Functions: /, *, +, -, f´(t), Integral, sin, cos, tan, x2 , SQRT, xy Maximum number of calculation from channels/ calc channel: 3 Interfaces USB device: Data transfer between device and PC USB host 1+2: USB 2.0, connection of external memory media Internal memory: 12 GB LAN: Connection of network cables Wireless communication: PPC-PAD-plus-W: WIFI Ambient Conditions Ambient temperature: -10...+50 °C Storage temperature: -20...+60 °C Rel. humidity: < 80% Environmental testing: 1 m drop test (EN 60721-3-7) Vibrations: EN 60721-3-7, 7M3 Protection rating: IP 65 (EN/IEC 60529:2014) External power supply: 110/240 V AC - 24 V DC/3.5 A Connection: 3-pin Rechargeable Battery Lithium-ion pack, 14.4 V/3350 mAh Materials Housing: ABS/PC (thermoplastic) Protective housing cover: TPE (thermoplastic elastomer) Flammability rating: UE94VO Dimensions (w x h x d): 282 x 195 x 85 mm Weight: 1880 g (without input module) VESA connection: 100 x 100 mm / M4 metric
RkJQdWJsaXNoZXIy ODUyNzU=