A www.stauff.com/8/en/#15 15 Information on the Pressure Equipment Directive (PED) 97/23/EC Pressure Equipment Directive (PED) Our pressure gauges (SPG) conform to the European Standard EN 837-1 and are manufactured and tested according to appropriate requirements. Pressure gauges with a full scale value between 0,5 bar and 200 bar / 7.25 PSI and 2900 PSI come under „Good Engineering Practice“ and must not carry a CE mark (section 3, paragraph 3). Pressure gauges (SPG) with a full scale value of less than 0,5 bar / 7.25 PSI and loose diaphragm sealings do not come under the PED and must not carry a CE mark. Our pressure gauges (SPG) with a full scale value of > 200 bar / 2900 PSI receive a CE mark according to the conformity procedure. The CE mark is attached to the outside of the housing (type designation plate). We are not authorised to CE mark pressure gauges without a company name or a company logo. Pressure Gauges § Accessories Single Station Gauge Isolator Valve (see Catalogue 6 - STAUFF Valves) Multi Station Gauge Isolator Valve (see Catalogue 6 - STAUFF Valves) Gauge Isolator Needle Valves (see Catalogue 6 - STAUFF Valves) Test Hoses - Gauge Adaptor (see Catalogue 7 - STAUFF Test) Gauge Adaptor (see Catalogue 7 - STAUFF Test) Direct Gauge Adaptor (see Catalogue 7 - STAUFF Test) Adjustable Gauge Fitting (see Catalogue 7 - STAUFF Test) Catalogue 8 § Edition 05/2021 Pressure Gauges
RkJQdWJsaXNoZXIy ODUyNzU=