Catalogue 7 - STAUFF Test

62 www.stauff.com/7/en/#62 C Technical Data Test Hose A B C D Nominal Bore (DN) (mm) DN 2 DN 4 Max. Working Pressure (PN) (bar / PSI) 400 / 5801 630 / 9135 340 / 4931 630 / 9135 Min. Burst Pressure (bar / PSI) 1100 / 15954 1900 / 27557 850 / 12328 1900 / 27557 Testing Pressure (bar / PSI) 600 / 8702 950 / 13778 570 / 8267 950 / 13779 Pressure Rating in bar / PSI at Indicated Temperature at   0 °C / 32 °F (122 %) (bar / PSI) 488 / 7077 768 / 11139 415 / 6016 768 / 11139 at  30 °C / 86 °F (110 %) 440 / 6381 693 / 10051 374 / 5424 693 / 10051 at  50°C / 122 °F (100 %) 400 / 5801 630 / 9137 340 / 4931 630 / 9137 at  80°C / 176 °F (86 %) 344 / 4989 542 / 7861 292 / 4241 542 / 7861 at 100 °C / 212 °F (77 %) 308 / 4467 485 / 7034 262 / 3797 485 / 7034 Working Temperature (°C / °F) -35 °C ... +100 °C / -31 °F ... +212 °F (momentary +120 °C / +248 °F) Inside Diameter (mm / in) 2 / .08 4 / .16 Outside Diameter (mm / in) 5 / .20 8,6 / .34 Bending Radius 1 at working pressure (mm / in) 20 / .79 40 / 1.57 at -20 °C / 4 °F 30 / 1.18 60 / 2.36 Max. Coil Length (m / ft) 20 / 65.62 Weight / m (g / oz) 16 / .50 42 / 1.35 Inner / Outer Tube PA Reinforcement Synthetic Fibre Standard hose end material is Steel 11 S Mn Pb 30 (1.0718), zinc/ nickel-plated (Type 15: Steel, black zinc/nickel-plated) Stainless Steel: V2A (1.4305/AISI 303), V4A (1.4571/AISI 316Ti) on request STAUFF Test Hoses (Selection) STAUFF-Test 20/20 STAUFF-Test 15/15 STAUFF-Test 12/12 2 STAUFF-Test 10/10 Gauge Adaptor 2 Special thread: buttress thread S12,65 x 1,5 Dimensional drawings: All dimensions in mm (in). Catalogue 7 § Edition 06/2023 Test Hoses and Connectors 1 Note: During mounting make sure that the bending radius for the test hose does not fall below the smallest permissible value. .