Catalogue 7 - STAUFF Test

A 50 www.stauff.com/7/en/#50 Thread Seal Type Working Dimensions Torque Weight Ordering Codes Pressure ( mm / in ) ( N·m / ft·lb ) ca. ( kg / lbs ) ca. (Standard Option) T ( bar / PSI ) h1 h2 Hex ThreadT per 100 M8 x 1 Type A 250 17,5 8,5 12 6 1,50 SMK-10-M8x1-B-A-W3 3625 .69 .33 .47 4.4 3.30 M10 x 1 400 17,5 9,8 12 12 1,70 SMK-10-M10x1-B-A-W3 5801 .69 .39 .47 8.8 3.74 R1/8 K Type D* 1 400 17,5 8 12 1,70 SMK-10-R1/8K-B-W3 5801 .69 .31 .47 3.74 Thread Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs ) ca. (Standard Option) T h Hex A per 100 G1/4 57 19 7,60 SMA-10-G1/4-B-OR-W3 2.24 .75 16.72 G1/2 67 27 12,70 SMA-10-G1/2-B-OR-W3 2.64 1.06 27.94 1/4 NPT 57 19 7,40 SMA-10-1/4NPT-W3 2.24 .75 16.31 1/2 NPT 67 27 12,70 SMA-10-1/2NPT-W3 2.64 1.06 27.99 Test Coupling with Male Threaded Stud SMK-10 Gauge Adaptor SMA-10 Through hole Ø 18 (.71) Ordering Codes *SMK* -10 *-M10x1* -B * -A * -W3 * Type Test Coupling with Ball Check SMK * Series STAUFF Test 10 -10 Plug In System * Port Connection acc. to dimension table -M10x1 * Seal Material NBR (Buna-N®) -B FKM (Viton®) -V EPDM -E Seal Type D none * Seal Type O-ring Type A -A Taper Type D -D * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2A - -W4 1.4305 (AISI 303) Stainless Steel V4A - -W5 1.4571 (AISI 316 Ti) 1 Suitable liquid / plastic sealant required. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Torque recommendations for Steel mating material. Ordering Codes *SMA* -10 *-G1/4* -B *-OR* -W3 * Type Gauge Adaptor SMA * Series STAUFF Test 10 -10 Plug In System * Thread acc. to dimension table -G1/4 * Seal Material NBR (Buna-N®) -B FKM (Viton®) -V EPDM -E Seal Type without O-ring none * Seal Type with O-ring -OR * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2A - -W4 1.4305 (AISI 303) Stainless Steel V4A - -W5 1.4571 (AISI 316 Ti) Standard option: With Hexagon Lock Nut. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Snubber on request. Dimensional drawings: All dimensions in mm (in). Catalogue 7 § Edition 06/2023 Test Couplings Seal Type O-ring Type A Taper Type D 1 For further information on Seal Types, please see page 74-77. T SW A (Hex A) max. 12 SW19 (Hex.75) M16 h h2 h1 T SW (Hex)