Catalogue 7 - STAUFF Test

A www.stauff.com/7/en/#17 17 Series PN Pipe Dimensions Weight Ordering Codes ( bar / PSI ) ( mm / in ) ( kg / lbs ) ca. (Standard Option) 2 Ød ~l1 3 l2 h Hex A Hex B per 100 1 L 315 4568 6 51 21 49 24 14 14,80 SMK-20-06L-G-W3-MS 2.01 .83 1.93 .94 .55 32.56 8 51 21 49 24 17 15,80 SMK-20-08L-G-W3-MS 2.01 .83 1.93 .94 .67 34.76 10 53 23 49 24 19 16,70 SMK-20-10L-G-W3-MS 2.09 .91 1.93 .94 .75 36.74 12 53 23 50,5 27 22 20,00 SMK-20-12L-G-W3-MS 2.09 .91 1.99 1.06 .87 44.00 15 55 25 52 30 27 26,00 SMK-20-15L-G-W3-MS 2.17 .98 2.05 1.18 1.06 57.20 18 57 24 53 32 32 32,20 SMK-20-18L-G-W3-MS 2.24 .94 2.09 1.26 1.26 70.84 160 2320 22 61 28 55 36 36 38,90 SMK-20-22L-G-W3-MS 2.40 1.10 2.17 1.42 1.42 85.58 28 61 28 57,5 41 41 45,20 SMK-20-28L-G-W3-MS 2.40 1.10 2.26 1.61 1.61 99.44 35 69 26 60 46 50 63,80 SMK-20-35L-G-W3-MS 2.72 1.02 2.36 1.81 1.97 140.36 42 71 25 64,5 55 60 88,40 SMK-20-42L-G-W3-MS 2.80 .98 2.54 2.17 2.36 194.48 S 630 9137 6 55 25 49 24 17 17,10 SMK-20-06S-G-W3-MS 2.17 .98 1.93 .94 .67 37.62 8 55 25 49 24 19 18,10 SMK-20-08S-G-W3-MS 2.17 .98 1.93 .94 .75 39.82 10 57 24 49 24 22 20,40 SMK-20-10S-G-W3-MS 2.24 .94 1.93 .94 .87 44.88 12 57 24 49 24 24 22,10 SMK-20-12S-G-W3-MS 2.24 .94 1.93 .94 .94 48.62 14 63 27 50,5 27 27 28,20 SMK-20-14S-G-W3-MS 2.50 1.06 1.99 1.06 1.06 62.04 400 5801 16 63 26 52 30 30 32,20 SMK-20-16S-G-W3-MS 2.50 1.02 2.05 1.18 1.18 70.84 20 69 26 55 36 36 47,30 SMK-20-20S-G-W3-MS 2.72 1.02 2.17 1.42 1.42 104.06 25 75 27 57,5 41 46 76,40 SMK-20-25S-G-W3-MS 2.95 1.06 2.26 1.61 1.81 168.08 30 81 28 60 46 50 86,80 SMK-20-30S-G-W3-MS 3.19 1.10 2.36 1.81 1.97 190.96 315 4568 38 91 29 64,5 55 60 127,70 SMK-20-38S-G-W3-MS 3.58 1.14 2.54 2.17 2.36 280.94 Test Coupling with Straight 24° Fitting SMK-20 Type G Ordering Codes *SMK* -20 * -18L * -G * -SK * -W3 *-MS * Type Test Coupling with Ball Check SMK * Series STAUFF Test 20 -20 (Connection Thread M16x2) * OutsideTubeDiameter acc. to dimension table -18 * Series Light Series L Heavy Series S * Seal Material FKM (Viton®) none EPDM -E * Connection Straight 24° Fitting -G * Protection Cap Knurled protection cap – Hexagonal protection cap -SK Plastic protection cap -KK * Material Code Steel, zinc/nickel-plated -W3 Stainless Steel V2A - -W4 1.4305 (AISI 303) Stainless Steel V4A - -W5 1.4571 (AISI 316 Ti) * Assembling / Fitting body only – Kitting Fitting body supplied with -MS Cutting rings and union nuts Fitting body supplied with -MSV soft-sealing cutting rings and union nuts 1 Weight including cutting rings and union nuts. 2 Standard option: Fitting body supplied with Cutting rings and union nuts. 3 Approximate dimension in assembled condition. Port acc. to ISO 8434-1 / DIN 2353 Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Dimensional drawings: All dimensions in mm (in). Catalogue 7 § Edition 06/2023 Test Couplings h l2 l1 Ød SW17 SW A (Hex .67) (Hex B) SW B (Hex A)