Catalogue 5 - STAUFF Quick Release Couplings

www.stauff.com/5/en/#147 147 FG Catalogue 5 § Edition 03/2024 STAUFF Screw-to-Connect Couplings Port A Dimensions Female Body Weight Male Tip Weight ( mm / in ) ( kg /lbs )ca. ( kg /lbs )ca. ØD2 L1 L2 L3 L4 Ordering Codes per 100 Ordering Codes per 100 Female Thread according to DIN 3852-2 - ANSI B 1.20.3 - SAE J1926-1 - ISO 11926-1 G 3/8" 65,8 82,3 12,9 QRC-FG-10-F-G06-S1-W3 34,70 QRC-FG-10-M-G06-S5-W3 38,40 2.59 3.25 .51 76.50 84.66 G 1/2" 70.4 82,3 14 QRC-FG-10-F-G08-S1-W3 35,20 QRC-FG-10-M-G08-S5-W3 36,80 2.77 3.25 .55 77.60 81.13 NPTF 3/8" -18 65,8 82,3 QRC-FG-10-F-NF06-S1-W3 34,50 QRC-FG-10-M-NF06-S5-W3 38,20 2.59 3.25 76.06 84.22 NPTF 1/2"-14 71,4 82,3 QRC-FG-10-F-NF08-S1-W3 36,00 QRC-FG-10-M-NF08-S5-W3 36,90 2.81 3.25 79.37 81.35 UNF 3/4" -16 70,4 82,3 16 QRC-FG-10-F-U08-S1-W3 35,60 QRC-FG-10-M-U08-S5-W3 37,20 2.77 3.25 .63 78.48 82.01 Series FG-10 § BG 2 § Nominal Size 10 A A L3 L4 Insertion Male Tip = 16,9 (.67) All dimensions in mm (inch). Port A Dimensions Female Body Weight Male Tip Weight ( mm / in ) ( kg /lbs )ca. ( kg /lbs )ca. ØD2 L1 L2 L3 L4 Ordering Codes per 100 Ordering Codes per 100 Female Thread according to DIN 3852-2 - ANSI B 1.20.3 - SAE J1926-1 - ISO 11926-1 G 1/2" 84,7 96 14 QRC-FG-12-F-G08-S1-W3 67,10 QRC-FG-12-M-G08-S5-W3 67,10 3.34 3.78 .55 147.93 147.93 G 3/4" 84,7 97 18 QRC-FG-12-F-G12-S1-W3 63,70 QRC-FG-12-M-G12-S5-W3 64,80 3.34 3.82 .71 140.43 142.86 NPTF 1/2" -14 83,7 96 QRC-FG-12-F-NF08-S1-W3 66,80 QRC-FG-12-M-NF08-S5-W3 67,60 3.30 3.78 147.27 149.03 NPTF 3/4" -14 84,7 96 QRC-FG-12-F-NF12-S1-W3 64,90 QRC-FG-12-M-NF12-S5-W3 65,00 3.34 3.78 143.08 143.30 UNF 3/4" -16 84,7 96 16 QRC-FG-12-F-U08-S1-W3 67,60 QRC-FG-12-M-U08-S5-W3 67,70 3.35 3.78 .63 149.03 149.25 UN 1" 1/16 -12 84,7 98 19 QRC-FG-12-F-U12-S1-W3 63,00 QRC-FG-12-M-U12-S5-W3 64,60 3.35 3.86 .75 138.89 142.42 Series FG-12 § BG 3 § Nominal Size 12,5 A A L3 L4 Insertion Male Tip = 18,4 (.72) All dimensions in mm (inch). Note: The connection of the two halves of a coupling is achieved depending on the type. It is important to observe the positive engagement of plug-type couplings and the secure tightening of screw-type couplings to the limit stop of the thread. Forced or improper separation will result in malfunction of the coupling. FG 12 scale 0,588 Schraffuren bitte unter 45° oder 135° anlegen SW36 (1.42) SW46 (1.81) 46.1 ( 1.81 ) Ø SW36 (1.42) 18.9 ( .74 ) M40x3 A 46.1 ( 1.81 ) Ø L2 24.45 ( .96 ) Ø M40x3 A L1 L4 L4 FG 10 scale 0,71 Schraffuren bitte unter 45° oder 135° anlegen SW30 (1.18) SW38 (1.49) SW30 (1.18) L2 L1 L4 17.5 ( .69 ) A A 37.8 ( 1.49 ) Ø 37.8 ( 1.49 ) Ø M33x2 19.79 ( .78 ) Ø M33x2 L4