Catalogue 5 - STAUFF Quick Release Couplings

www.stauff.com/5/en/#141 141 RH Catalogue 5 § Edition 03/2024 STAUFF Screw-to-Connect Couplings Port A Dimensions Female Body Weight Male Tip Weight ( mm / in ) ( kg /lbs )ca. ( kg /lbs )ca. ØD2 L1 L2 L3 L4 Ordering Codes per 100 Ordering Codes per 100 Male Thread with 24° Conical Bore - Shape W according to DIN 3861 M14x1.5 8L 54 61 10 QRC-RH-10-F-08L-S1-W3 20,80 QRC-RH-10-M-08L-BT-W3 31,80 2.13 2.40 .39 45.86 70.11 M16x1.5 10L 55 61 11 QRC-RH-10-F-10L-S1-W3 21 QRC-RH-10-M-10L-BT-W3 32 2.17 2.40 .43 46.30 70.55 M18x1.5 12L 55 61 11 QRC-RH-10-F-12L-S1-W3 21,20 QRC-RH-10-M-12L-BT-W3 32,20 2.17 2.40 .43 46.74 70.99 M22x1.5 15L 56 62 12 QRC-RH-10-F-15L-S1-W3 22 QRC-RH-10-M-15L-BT-W3 32,90 2.20 2.44 .47 48.50 72.53 M18x1.5 10S 56 62 12 QRC-RH-10-F-10S-S1-W3 21,50 QRC-RH-10-M-10S-BT-W3 32,60 2.20 2.44 .47 47.40 71.87 M20x1.5 12S 56 62 12 QRC-RH-10-F-12S-S1-W3 22 QRC-RH-10-M-12S-BT-W3 33 2.20 2.44 .47 48.50 72.75 M22x1.5 14S 58 64 14 QRC-RH-10-F-14S-S1-W3 22,70 QRC-RH-10-M-14S-BT-W3 33,80 2.28 2.52 .55 50.04 74.52 M24x1.5 16S 58 64 14 QRC-RH-10-F-16S-S1-W3 23 QRC-RH-10-M-16S-BT-W3 33,90 2.28 2.52 .55 50.71 74.74 Series RH-10 § BG 2 § Nominal Size 10 A A L3 L3 L4 ele.pdf 1 10.09.13 15:44 SW: Width across flats. All dimensions in mm (inch). Port A Dimensions Female Body Weight Male Tip Weight ( mm / in ) ( kg /lbs )ca. ( kg /lbs )ca. ØD2 L1 L2 L3 L4 Ordering Codes per 100 Ordering Codes per 100 Male Thread with 24° Conical Bore - Shape W according to DIN 3861 M22x1.5 15L 65 78 12 QRC-RH-12-F-15L-S1-W3 31,20 QRC-RH-12-M-15L-BT-W3 56,40 2.56 3.07 .47 68.78 124.34 M24x1.5 16S 67 80 14 QRC-RH-12-F-16S-S1-W3 32 QRC-RH-12-M-16S-BT-W3 57,30 2.64 3.15 .55 70.55 126.32 M30x2 20S 69,5 81,2 16 QRC-RH-12-F-20S-S1-W3 34,80 QRC-RH-12-M-20S-BT-W3 59,50 2.74 3.20 .63 76.72 131.18 Series RH-12 § BG 3 § Nominal Size 12,5 A A L3 L3 L4 ele.pdf 1 10.09.13 15:44 SW: Width across flats. All dimensions in mm (inch). Note: The connection of the two halves of a coupling is achieved depending on the type. It is important to observe the positive engagement of plug-type couplings and the secure tightening of screw-type couplings to the limit stop of the thread. Forced or improper separation will result in malfunction of the coupling. RH 12 scale 0.74 SW41 (1.61) M36x1 L3 L1 A D2 SW41 (1.61) So.M36x3 L2 19.2(0.76) L3 45 Ø (1.77) So.M36x3 SW46 (1.81) SW36 (1.41) D2 A 29 (1.14) RH 08 scale 0.74 L2 14 (.55) L3 A D2 39 Ø (1.54) So.M32x3 L3 L1 A D2 SW36(1,42) SW36(1,42) SW41 (1.61) SW27 (1.06) M30x1 So M32x3 24(.95)

RkJQdWJsaXNoZXIy ODUyNzU=