Catalogue 4 STAUFF Hose Connectors Hose Connectors High-Pressure Hose Connectors
Please note: Unless otherwise stated, all data and figures in this product catalogue are approximate values and are only valid as references, which are not binding (also in respect to any third parties’ rights of protection) and thus do not release the customer / user from checking and testing the suitability of the products for the foreseen purposes. Therefore, data and figures can only be used in a limited sense for construction purposes. The application of the products is beyond the control possibilities of the manufacturer and, therefore, is exclusively subject to the responsibility of the customer / user. In the event that a liability is nevertheless considered, any compensation will be limited to the value of the goods supplied by the manufacturer and used by the customer / user. As a matter of course, the manufacturer guarantees the perfect quality of all products in accordance with the General Terms and Conditions of Business and Sale. Subject to modifications due to the ongoing development and improvement of the products. With the publication of this product catalogue, previous editions are no longer valid. Germany Walter Stauffenberg GmbH & Co. KG Im Ehrenfeld 4 58791 Werdohl www.stauff.com STAUFF products and services are globally available through wholly-owned subsidiaries and a tight network of authorised distributors and representatives in all major industrial regions of the world. You can find detailed contact information on the last two pages of this product catalogue or at www.stauff.com/contact.
www.stauff.com/4/en/#3 3 A B C D E F G ECOVOS Carbon Steel Hose Connectors ECOVOS + Mobile Interlocking Protection ECOVOS Stainless Steel Hose Connectors MULTIVOS High-Pressure Carbon Steel Hose Connectors POWERVOS High-Pressure High-Performance Steel Hose Connectors Introduction 4 - 11 12 - 83 83 - 89 90 - 137 138 - 177 178 - 183 Test Mandrels and Mandrel Kits Technical Appendix Appendix (Product-Specific Abbreviations / Global Contact Directory) 184 - 187 188 - 197 198 - 203 Catalogue 4 § Edition 06/2023 Introduction
4 www.stauff.com/4/en/#4 Catalogue 4 § Edition 06/2023 Introduction Catalogue 1 STAUFF Clamps Catalogue 2 STAUFF Connect Catalogue 3 STAUFF Flanges Catalogue 4 STAUFF Hose Connectors Catalogue 5 STAUFF Quick Release Couplings Catalogue 6 STAUFF Valves § Block Clamps § Special Clamps § Light Series Clamps § Saddle Clamps § U-Bolt Clamps § Metal Clamps § Construction Series § Tube Connectors § Assembly Tools and Devices § SAE Flanges § Gear Pump Flanges § Hose Connectors § High-Pressure Hose Connectors § Push-to-Connect Couplings § Multi Couplings § Screw-to-Connect Couplings § Two-Way Ball Valves § Multi-Way Ball Valves § Flow Control and Check Valves § Gauge Isolator Valves
www.stauff.com/4/en/#5 5 Catalogue 4 § Edition 06/2023 Introduction Catalogue 7 STAUFF Test Catalogue 8 STAUFF Diagtronics Catalogue 9 STAUFF Filtration Technology Catalogue 10 STAUFF Hydraulic Accessories § Test Couplings § Test Adaptors § Test Hoses and Connectors § Pressure Gauges § Hydraulic Testers § Oil Analysis Equipment § Replacement Filter Elements § Pressure Filters § Return-Line Filters § In-Line Filters § Spin-On Filters § Offline and Bypass Filters § Filtration Systems § Fluid Level and Temperature Indicators § Tank Filler Breathers § Giant and Desiccant Air Breathers § Suction Strainers § Diffusors
6 www.stauff.com/4/en/#6 Catalogue 4 § Edition 06/2023 Introduction STAUFF LINEComponents With the seven dedicatedSTAUFF Line product groups § STAUFF Clamps § STAUFF Connect § STAUFF Flanges § STAUFF Hose Connectors § STAUFF Quick Release Couplings § STAUFF Valves § STAUFF Test from own, in-house development and manufacturing, the companies of the STAUFF Group provide a comprehensive range of components for fastening and connecting pipes, tubes and hoses for mobile and industrial hydraulic applications and many other industries. The portfolio is completed by components for shutting-off, regulating, throttling and measuring fluid media. In order to perfectly match each other, STAUFF Line products are designed and offered on a high, uniform level of quality. A large proportion of the range made from steel comes as standard with the premium STAUFF Zinc/Nickel surface coating, which is also optionally available for many of the other components. This coating offers the most reliable surface protection far beyond the previous market standards – even after transport, handling and assembly of the components – and meets all current legal requirements. If desired, Original Equipment Manufacturers can be supported with value-added services, from technical consultation to pre-assembly, assembly and kitting as well as logistics services : § Support with the selection of suitable standard components and ordering options; provision of customised solutions according to customer’s specifications or based on our in-house development – from prototyping to large scale production § Analysis and optimizationof existing and design and developments of new systems aimed at increasing the efficiency and performance of machines and equipment and creating value for customers by reducing the total cost § Pre-assembly, assembly and kittingof individual components to customer-specific system modules § Individually coordinatedprocurement solutions (e.g. web shop and electronic data interchange) and supply models (e.g. from warehousing of customised components to Kanban logistics and just-in-time delivery of pre-fabricated system modules to the assembly lines of the customers) aimed at optimising material flows For more than 50 years, the companies of STAUFF Group have been developing, manufacturing and distributing pipework equipment and hydraulic components for mechanical and plant engineering and for service and industrial maintenance. In addition to mobile and industrial hydraulic machinery, typical applications also include commercial and special purpose vehicles, rail transportation and energy technology. Likewise, STAUFF products are used in marine, oil and gas applications and in the process, food and chemical industries. The overall range currently includes about 50000 standard products as well as numerous special and system solutions according to customer’s specifications or based on our in-house development. All STAUFF products undergo relevant testing in accordance with international regulations and are governed by the high standards of the in-house quality management system. Furthermore, many items have received certifications and approvals from various international institutes, organisations and authorities who have independently confirmed the quality and performance of the products. Wholly-owned manufacturing, sales and service facilities in 18 countries and a tight global network of authorised distribution partners ensure high presence and service paired with a maximum of availability. Quality Management – ISO 9001:2015 Environmental Management – ISO 14001:2015 Safety Management – ISO 45001:2018 Energy Management – ISO 50001:2018
www.stauff.com/4/en/#7 7 Catalogue 4 § Edition 06/2023 Introduction Aligned with the needs of the market, the product groups § STAUFF Test § STAUFF Diagtronics § STAUFF Filtration Technology § STAUFF Hydraulic Accessories include a comprehensive range of analogue and digital measuring equipment and devices, filtration systems and replacement filter elements as well as accessories for the construction of tanks, reservoirs, power packs and gear boxes in mobile and industrial hydraulics. The offer is completed by relevant value-added services: § Support with the selection of suitable components and ordering options; provision of customised solutions according to customer’s specifications or based on our in-house development – from prototyping to large scale production § Analysis of existing hydraulic circuits aimed at filtration systems, tank components and monitoring devices that perfectly match to the specific requirements, and developing integrated concepts to increase the efficiency and performance of machines and equipment § Individually coordinatedprocurement solutions and supply models
8 www.stauff.com/4/en/#8 Catalogue 4 § Edition 06/2023 STAUFF Hose Connectors The STAUFF ECOVOSsystem of hose connectors enables crimping of many different hose types with only one hose insert profile, which results in an immense reduction of endless product varieties. The use of identical parts with ECOVOSmeans a reduction of individual components by approximately 45 per cent. ECOVOS + , the mobile interlocking protection from STAUFF, turns standard ECOVOS components into interlock hose connectors in no time at all, thereby saving inventory costs and increasing economical efficiency. For larger requirements, ECOVOS hose connectors with interlocking protection can also be manufactured as single parts with integrated securing rings. The ECOVOS VA range provides the system of hose connectors in Stainless Steel. MULTIVOSis the name of the STAUFF range of high-pressure hose connectors which offers customers the opportunity to use two types of hoses (R15 and 4SH) with only one hose insert profile. POWERVOSis an advanced development of theMULTIVOS range. This product series was designed especially for hammer/breaker operation in construction equipment for use in quarries. POWERVOSis especially designed and constructed using high-performance materials to withstand high impulses. The hose connectors are suitable for use with hose types 4SH/AS and R15/AS. Introduction
www.stauff.com/4/en/#9 9 Catalogue 4 § Edition 06/2023 § Significantly reduced tendency to corrosion by contact with other metals (such as Aluminium and Stainless Steel) § Improved abrasion resistance due to the ductility / plastic deformability of the coating § Little to no risk of triggering allergies – nickel release is down to only a fraction of the statutory limits relating to objects which come into direct and prolonged contact with the skin (independent results of the reference test method according DIN EN 1811 are available on request) § Good paint adhesion properties § Resistance against all commonly used hydraulic media STAUFF Zinc/Nickel Coating Layers Sealing Passivation Zinc/Nickel Steel § At least 1200 hours (before crimping) resistance to red rust / base metal corrosion in the salt-spray chamber according to DIN EN ISO 9227 § White rust occurs only by way of a slight grey haze § Free of hexavalent chrome Cr(VI) § ELV compliant according to 2000/53/EC (End of Life Vehicles Directive) § REACH compliant according to 1907/2006/EC (Registration, Evaluation, Authorisation and Restriction of Chemicals) § RoHS compliant according to 2002/95/EC (Restrictions of the Use of Hazardous Substances) § Appealing colour scheme with a bright semi-gloss surface finish The STAUFF Zinc/Nickel Coating offers excellent surface protection – even after transport, handling and assembly. This was confirmed by testing in the salt-spray chamber according to DIN EN ISO 9227. Users across all industries and applications benefit from sophisticated technology, which has been developed for and used by the very demanding automotive industry for many years now and that is already the proven standard for a large proportion of STAUFF hose connectors since 2007. Introduction
10 www.stauff.com/4/en/#10 Catalogue 4 § Edition 06/2023 Introduction The STAUFF online catalogue centre at www.stauff.com/catalogues provides fast and direct access to digital versions of this as well as other STAUFF product catalogues in all available languages. www.stauff.com/catalogues Online Page-Flip Catalogues § Easy navigation through index or the powerful full text search functionality § Contents can be shared and forwarded by e-mail, printed or downloaded and saved in PDF file format § Also suitable for mobile devices Download Catalogues § Download entire product catalogues and save them in PDF file format The fastest way to the online page-flip catalogue: The links that can be found at the bottom edge of all pages of this product catalogue will lead you directly to the corresponding page in the online page-flip catalogue. In doing so, contents can be searched, shared and forwarded by e-mail, printed or downloaded and saved in PDF file format. Scan the QR code next to the direct link with the camera of your mobile device* and also use the functions in this way. * may require a suitable app 10 www.stauff.com/4/en/#10 Catalogue 4 § Edition 06/2023
www.stauff.com/4/en/#11 11 Catalogue 4 § Edition 06/2023 Introduction With the STAUFF Digital Platform available at www.stauff.com, commercial customers and users of STAUFF products can not only inform themselves in all detail about the 50000 components typically available from stock, but also directly purchase these online without complex registration. General information about the companies of STAUFF Group, latest business and product news as well as complete global contact details also be available. Immediate access to and free download of 3D models and 2D drawings for a growing number of STAUFF products www.stauff.com www.stauff.com/cad www.filterinterchange.com Online database for the quick and easy identification and interchange of almost all common brands and types of replacement filter elements Main Functionalities of the STAUFF Digital Platform: Around the clock Check stock availability and pricing for STAUFF products in real time Cross references Search by article designations of other manufacturers / suppliers Live chat Get directly in touch with the STAUFF customer service and sales team CAD database Download 3D models and 2D drawings for STAUFF products Advantages as a Registered User of the STAUFF Digital Platform: Purchase STAUFF products Taking customer-specific pricing and delivery conditions into account Ordering w/o searching Quick ordering by entering article number, quantity and requested delivery date File upload Direct upload of orders with multiple positions in CSV or Excel file format Notepad function Create project lists to save interesting products for later Follow STAUFF and keep yourself updated: Linkedin www.linkedin.com/company/stauff Youtube www.youtube.com/stauffgroup STAUFF Newsletters Automatic e-mail notifications about latest news from STAUFF www.stauff.com/newsletter
Skive/Non-Skive Swage Ferrule for Braided and Spiral Hose Series 15000 / UVOS Non-Skive Swage Ferrule for Braided Hose Series 15011 Skive/Non-Skive Swage Ferrule for Braided Hose Series 15021 Skive Swage Ferrule for Braided and Spiral Hose Series 15031 Non-Skive Swage Ferrule for Compact Braided Hose Series 15211 / AGRIVOS Non-Skive Swage Ferrule for Compact Braided Hose Series 15311 / CVOS Non-Skive Swage Ferrule for Hose with Textile Insert Series 15330 14 16 17 18 19 20 21 Straight Insert with Male Metric Thread and 24° Conical Bore CEL (Light Series) Straight Insert with Male Metric Thread and 24° Conical Bore CES (Heavy Series) Straight Insert with Female Metric Nut Thread and 24° Taper / O-Ring DKOL (Light Series) 45° Elbow Insert with Female Metric Nut Thread and 24° Taper / O-Ring DKOL 45° (Light Series) 90° Elbow Insert with Female Metric Nut Thread and 24° Taper / O-Ring DKOL 90° (Light Series) Straight Insert with Female Metric Nut Thread and 24° Taper / O-Ring DKOS (Heavy Series) 45° Elbow Insert with Female Metric Nut Thread and 24° Taper / O-Ring DKOS 45° (Heavy Series) 22 23 24 26 28 30 32 90° Elbow Insert with Female Metric Nut Thread and 24° Taper / O-Ring DKOS 90° (Heavy Series) 34
A 13 www.stauff.com/4/en/#13 ECOVOS Carbon Steel Hose Connectors Catalogue 4 § Edition 06/2023 Straight Insert with Female Metric Nut Thread and Metal Seat DKK 45° Elbow Insert with Female Metric Thread and Metal Seat DKK 45° 90° Elbow Insert with Female Metric Thread and Metal Seat DKK 90° Straight Insert with Male BSPP Thread and 60° Conical Bore AGR Straight Insert with Male BSPP Thread AGRF 44 45 46 47 48 Straight Insert with Male BSPT Thread AGRK 49 Straight Insert with Male UN/UNF Thread and 74° Taper AGJ Straight Insert with Male BSPP Thread and 60° Taper AGJG 45° Elbow Insert with Male BSPP Thread and 60° Taper AGJG 45° 90° Elbow Insert with Male BSPP Thread and 60° Taper AGJG 90° Straight Insert with Male Metric Thread and 60° Taper AGJM 50 51 52 53 54 90° Elbow Insert with Male Metric Thread and 60° Taper AGJM 90° 55 Straight Insert with Male NPTF Thread and 60° Conical Bore AGN 56 Straight Insert with O-Ring Face Seal Connection ORFS 57 Straight Insert with SAE Flange Adaptor SFL (3000 PSI Series) 45° Elbow Insert with SAE Flange Adaptor SFL 45° (3000 PSI Series) 90° Elbow Insert with SAE Flange Adaptor SFL 90° (3000 PSI Series) Straight Insert with SAE Flange Adaptor SFS (6000 PSI Series) 45° Elbow Insert with SAE Flange Adaptor SFS 45° (6000 PSI Series) 58 59 60 61 62 90° Elbow Insert with SAE Flange Adaptor SFS 90° (6000 PSI Series) 63 Straight Insert with Female BSPP Thread and 60° Taper DKR 45° Elbow Insert with Female BSPP Thread and 60° Taper DKR 45° 90° Elbow Insert with Female BSPP Thread and 60° Taper DKR 90° Straight Insert with Female BSPP Thread DKRF 90° Elbow Insert with Female BSPP Thread DKRF 90° 64 65 66 67 68 Straight Insert with Female UN/UNF Thread and 74° Conical Bore DKJ 69 45° Elbow Insert with Female UN/UNF Thread and 74° Conical Bore DKJ 45° 90° Elbow Insert with Female UN/UNF Thread and 74° Conical Bore DKJ 90° Straight Insert with Female BSPP Thread and 60° Conical Bore DKJG 45° Elbow Insert with Female BSPP Thread and 60° Conical Bore DKJG 45° 90° Elbow Insert with Female BSPP Thread and 60° Conical Bore DKJG 90° 70 71 72 73 74 Straight Insert with Female Metric Thread and 60° Conical Bore DKJM 75 45° Elbow Insert with Female Metric Thread and 60° Conical Bore DKJM 45° 76 90° Elbow Insert with Female Metric Thread and 60° Conical Bore DKJM 90° 77 Straight Insert with Female UN/UNF Thread for O-Ring Face Seal Connection ORS 45° Elbow Insert with Female UN/UNF Thread for O-Ring Face Seal Connection ORS 45° 90° Elbow Insert with Female UN/UNF Thread for O-Ring Face Seal Connection ORS 90° Straight Insert with Pressure Washer Connector WCS Straight Insert with Pressure Washer Connector WCC 78 79 80 81 81 Straight Metric Banjo Insert RGN 82 Straight Imperial Banjo Insert RGNG 83
A 14 www.stauff.com/4/en/#14 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors UVOS Skive/Non-Skive Swage Ferrule for Braided and Spiral Hose The patented STAUFF UVOS system contains a comprehensive range of skive/non-skive swage ferrules for braided and spiral hose according to EN 853, EN 854, EN 857 and EN 856. It is available for standard hose sizes from DN 06 to DN 12 (equals 1/4" to 1/2" and -04 to -08) with only one swage ferrule required per nominal size. § Convincingly simple and extremely easy use § Flow cross section enlarged by the patented “self-adjusting” design of the ferrule § Preventing the hose insert from collapsing and constricting the flow due to the ability to adapt to the hose and hose insert parameters § Providing the prerequisite for reducing the wall thickness of the hose insert and consequently achieving a substantially larger clear flow cross section in the constriction zone § Resulting in a significant improvement in hydraulic output while achieving excellent connection stability without creating tension in the connection zone which exceeds the yield strength of the hose insert material Skive Non-Skive EN 853 1SN/2SN 1ST/2ST (skive) EN 854 2TE/3TE EN 857 1SC/2SC EN 856 4SP
A 15 www.stauff.com/4/en/#15 UVOS Skive/Non-Skive Swage Ferrule for Braided and Spiral Hose Series 15000 Hose Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash D D1 D2 L b per 100 06 1/4" -04 12,5 15,6 20,6 31,0 2,4 1,9 HF-2000-06-W3 .49 .61 .81 1.22 .09 4.19 08 5/16" -05 14,0 17,5 22,5 31,0 2,4 2,2 HF-2000-08-W3 .55 .69 .89 1.22 .09 4.85 10 3/8" -06 15,0 20,0 26,0 34,0 2,6 3,3 HF-2000-10-W3 .59 .79 1.02 1.34 .10 7.28 12 1/2" -08 19,5 23,0 29,0 37,0 2,6 3,9 HF-2000-12-W3 .77 .91 1.14 1.46 .10 8.60 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors Suitable for 1SN, 2SN, 1ST, 2ST, 1SC, 2SC, 1SN-K, 2SN-K, 2TE, 3TE, 4SP Standards EN 853, EN 854, EN 856, EN 857 Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Maximum working pressures depending on the type of the hose connector and the hose type.
A 16 www.stauff.com/4/en/#16 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors Hose Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash D D1 D2 L b per 100 05 1/8" -03 9,8 12,5 17,0 27,3 2,0 1,7 HF-1001-05-W3 .39 .49 .67 1.07 .08 3.64 05 1/8" -03 9,8 14,0 18,6 27,3 2,0 2,0 HF-1002-05-W3 .39 .55 .73 1.07 .08 4.30 06 1/4" -04 11,8 15,7 21,0 31,0 2,5 2,6 HF-1000-06-W3 .46 .62 .83 1.22 .10 5.62 08 5/16" -05 13,2 17,3 22,5 31,0 2,5 2,7 HF-1000-08-W3 .52 .68 .89 1.22 .10 5.84 10 3/8" -06 15,5 19,8 26,5 33,0 2,5 4,7 HF-1000-10-W3 .61 .78 1.04 1.30 .10 10.25 12 1/2" -08 19,2 23,0 30,0 36,0 2,5 5,7 HF-1000-12-W3 .76 .91 1.18 1.42 .10 12.57 16 5/8" -10 22,5 26,2 34,0 38,0 2,5 7,8 HF-1000-16-W3 .89 1.03 1.34 1.50 .10 17.09 19 3/4" -12 25,5 30,1 38,0 44,0 3,0 10,4 HF-1000-19-W3 1.00 1.19 1.50 1.73 .12 22.82 25 1" -16 32,8 38,8 47,0 52,0 3,7 16,4 HF-1000-25-W3 1.29 1.53 1.85 2.05 .15 36.16 31 1 1/4" -20 40,5 49,3 57,0 60,0 4,0 21,1 HF-1000-31-W3 1.59 1.94 2.24 2.36 .16 46.53 38 1 1/2" -24 46,6 55,8 65,0 73,0 4,3 37,5 HF-1000-38-W3 1.83 2.20 2.56 2.87 .17 82.58 51 2" -32 58,9 68,5 78,0 80,0 4,3 50,0 HF-1000-51-W3 2.32 2.70 3.07 3.15 .17 110.25 D b D1 D2 L Non-Skive Swage Ferrule for Braided Hose Series 15011 Suitable for 1SN, 2SN, 2SC, 2SN-K Standards EN 853, EN 857 Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Maximum working pressures depending on the type of the hose connector and the hose type. Related Products and Accessories Test Mandrels Pages 185-187
A 17 www.stauff.com/4/en/#17 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors L D D1 D2 b Hose Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash D D1 D2 L b per 100 05 1/8" -03 9,4 10,9 17,3 27,3 2,0 2,4 HF-3001-05-W3 .37 .43 .68 1.07 .08 5.29 06 1/4" -04 11,0 13,2 20,0 31,0 2,5 3,1 HF-2001-06-W3 .43 .52 .79 1.22 .10 6.84 08 5/16" -05 12,6 15,5 20,6 31,0 2,6 2,55 HF-2001-08-W3 .50 .61 .81 1.22 .10 5.62 10 3/8" -06 14,1 16,6 23,6 33,0 2,5 4,3 HF-2001-10-W3 .56 .65 .93 1.30 .10 9.37 12 1/2" -08 17,6 19,5 27,0 35,0 2,5 5,6 HF-2001-12-W3 .69 .77 1.06 1.38 .10 12.35 16 5/8" -10 21,6 23,0 31,0 38,0 2,6 7,5 HF-2001-16-W3 .85 .91 1.22 1.50 .10 16.54 19 3/4" -12 24,5 26,8 35,0 44,0 3,0 10,3 HF-2001-19-W3 .96 1.06 1.38 1.73 .12 22.60 25 1" -16 30,4 34,1 42,0 52,0 3,7 14,3 HF-2001-25-W3 1.20 1.34 1.65 2.05 .15 31.42 38 1 1/2" -24 44,4 51,3 62,0 68,0 4,3 42,4 HF-2001-38-W3 1.75 2.02 2.44 2.68 .17 93.38 51 2" -32 56,7 64,0 75,0 80,0 4,3 62,0 HF-2001-51-W3 2.23 2.52 2.95 3.15 .17 136.60 Skive/Non-Skive Swage Ferrule for Braided Hose Series 15021 Suitable for 1SN, 2SC, 2SN-K, 1SC, 1SN-K Standards EN 853, EN 857 Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Maximum working pressures depending on the type of the hose connector and the hose type. Related Products and Accessories Test Mandrels Pages 185-187
A 18 www.stauff.com/4/en/#18 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors Hose Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash D D1 D2 L b per 100 05 1/8" -03 9,4 12,3 19,0 27,3 2,0 2,8 HF-3002-05-W3 .37 .48 .75 1.07 .08 6.17 06 1/4“ -04 10,2 15,5 22,0 34,0 2,5 4,1 HF-3000-06-W3 .40 .61 .87 1.34 .10 8.93 08 5/16" -05 12,7 17,2 23,0 31,0 2,5 3,45 HF-3000-08-W3 .50 .68 .91 1.22 .10 7.61 10 3/8" -06 14,5 18,9 26,0 38,0 2,5 5,5 HF-3000-10-W3 .57 .74 1.02 1.50 .10 12.13 12 1/2" -08 18,5 22,2 30,0 40,0 2,5 7,5 HF-3000-12-W3 .73 .87 1.18 1.57 .10 16.54 16 5/8" -10 21,6 26,4 33,6 40,0 2,5 8,3 HF-3000-16-W3 .85 1.04 1.32 1.57 .10 18.30 19 3/4" -12 25,0 30,2 39,0 50,0 3,0 15,3 HF-3000-19-W31 .98 1.19 1.54 1.97 .12 33.63 25 1" -16 30,9 36,7 46,0 60,0 3,7 21,8 HF-3000-25-W31 1.22 1.44 1.81 2.36 .15 48.07 31 1 1/4" -20 38,8 47,0 57,0 65,0 4,0 33,4 HF-3000-31-W31 1.53 1.85 2.24 2.56 .16 73.54 38 1 1/2" -24 44,4 53,7 65,0 73,0 4,3 51,9 HF-3000-38-W3 1.75 2.11 2.56 2.87 .17 114.33 51 2" -32 57,3 66,6 78,0 80,0 4,3 68,4 HF-3000-51-W3 2.26 2.62 3.07 3.15 .17 150.71 L D D2 D1 b Skive Swage Ferrule for Braided and Spiral Hose Series 15031 Suitable for 2SN, SPC3, 4SP 4SH (DN 19 to DN 31) Standards EN 853, EN 856 Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Maximum working pressures depending on the type of the hose connector and the hose type. Related Products and Accessories Test Mandrels Pages 185-187 1 Approved for use with spiral hose 4SH according to EN 856.
A 19 www.stauff.com/4/en/#19 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors L1 b D D2 D1 Hose Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash D D1 D2 L b per 100 06 1/4“ -04 11,4 14 18,8 25,0 2,5 1,95 HF-1003-06-W3 .45 .55 .74 .98 .10 4.30 08 5/16" -05 13,6 15,8 20,6 25,0 2,5 2,1 HF-1003-08-W3 .54 .62 .81 .98 .10 4.63 10 3/8" -06 15,0 18,0 23,6 26,5 2,5 3,1 HF-1003-10-W3 .59 .71 .93 1.04 .10 6.84 12 1/2" -08 18,4 21,3 27,0 30,0 2,5 3,8 HF-1003-12-W3 .72 .84 1.06 1.18 .10 8.27 AGRIVOS Non-Skive Swage Ferrule for Compact Braided Hose Series 15211 Suitable for 2SC, 2SN-K Standard EN 857 Pressure Level Isobaric 250 bar / 25 MPa / 3625 PSI Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Maximum working pressures depending on the type of the hose connector and the hose type. Related Products and Accessories Test Mandrels Pages 185-187
A 20 www.stauff.com/4/en/#20 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors D D1 D2 b L Hose Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash D D1 D2 L b per 100 06 1/4“ -04 11,2 14,5 19,0 26,0 2,2 1,7 HF-1004-06-W3 .44 .57 .75 1.02 .09 3.75 08 5/16" -05 13,2 16,4 21,0 26,0 2,2 2,0 HF-1004-08-W3 .52 .65 .83 1.02 .09 4.30 10 3/8" -06 15,0 18,0 24,0 27,5 2,2 3,2 HF-1004-10-W3 .59 .71 .94 1.08 .09 7.06 12 1/2" -08 18,9 21,6 28,5 31,0 2,2 3,6 HF-1004-12-W3 .74 1.12 1.12 1.22 .09 7.83 CVOS Non-Skive Swage Ferrule for Compact Braided Hose Series 15311 Suitable for 1SC, 2SC, 1SN-K, 2SN-K Standard EN 857 Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Maximum working pressures depending on the type of the hose connector and the hose type. Related Products and Accessories Test Mandrels Pages 185-187
A 21 www.stauff.com/4/en/#21 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors b L D1 D2 D Non-Skive Swage Ferrule for Hose with Textile Insert Series 15330 Suitable for 2TE, 3TE Standard EN 854 Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Maximum working pressures depending on the type of the hose connector and the hose type. Hose Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash D D1 D2 L b per 100 05 1/8" -03 9,8 12,5 17,0 27,3 2,0 1,65 HF-1001-05-W3 .39 .49 .67 1.07 .08 3.64 05 1/8" -03 9,8 14,0 18,6 27,3 2,0 2,0 HF-1002-05-W3 .39 .55 .73 1.07 .08 4.30 06 1/4“ -04 11,6 15,3 19,0 28,0 2,4 1,85 HF-1005-06-W3 .46 .60 .75 1.10 .09 4.08 08 5/16" -05 12,8 17,2 22,3 30,2 2,5 2,9 HF-1005-08-W3 .50 .68 .88 1.19 .10 6.39 10 3/8" -06 14,9 19,2 23,0 29,5 2,4 2,5 HF-1005-10-W3 .59 .76 .91 1.16 .09 5.51 12 1/2" -08 18,5 23,0 27,0 31,0 2,5 3,1 HF-1005-12-W3 .73 .91 1.06 1.22 .10 6.84 16 5/8" -10 21,8 26,9 32,0 33,0 2,5 5,3 HF-1005-16-W3 .86 1.06 1.26 1.30 .10 11.69 19 3/4" -12 24,6 29,9 35,0 37,5 3,0 6,7 HF-1005-19-W3 .97 1.18 1.38 1.48 .12 14.66 25 1" -16 30,8 37,2 42,0 45,5 3,4 9,8 HF-1005-25-W3 1.21 1.46 1.65 1.79 .13 21.50 31 1 1/4" -20 37,9 43,5 48,0 55,0 3,8 12,8 HF-1005-31-W3 1.49 1.71 1.89 2.17 .15 28.22 51 2" -32 56,8 64,5 75,9 78,5 4,0 61,5 HF-1005-51-W3 2.24 2.54 2.99 3.09 .16 135.50 Related Products and Accessories Test Mandrels Pages 185-187
A 22 www.stauff.com/4/en/#22 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors D D1 X L A 24° SW Straight Insert with Male Metric Thread and 24° Conical Bore Type CEL (Light Series) Connection Type Male Metric Thread Sealing Type 24° Conical Bore (Shape W acc. to DIN 3861) Standard ISO 8434-1 Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Hose Size Connection Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash Thread Dash D D1 X L SW (Hex) per 100 05 1/8'' -03 M12x1,5 -03 2,9 5,1 22,0 47,0 14,0 1,8 HCS-05-CE-06L-M-W3 .11 .20 .87 1.85 .55 3.97 06 1/4'' -04 M14x1,5 -04 3,9 6,7 23,5 53,5 14 2,3 HCS-06-CE-08L-M-W3 .15 .26 .93 2.11 .55 5.07 06 1/4'' -04 M12x1,5 -03 3,9 6,7 23,5 53,5 14 2,2 HCS-06-CE-06L-M-W3 .15 .26 .93 2.11 .55 4.85 06 1/4'' -04 M16x1,5 -05 3,9 6,7 25,5 55,5 17 3,1 HCS-06-CE-10L-M-W3 .15 .26 1.00 2.19 .67 6.73 06 1/4'' -04 M18x1,5 -06 3,9 6,7 25,5 55,5 19,0 3,4 HCS-06-CE-12L-M-W3 .15 .26 1.00 2.19 .75 7.50 08 5/16'' -05 M16x1,5 -05 5,4 8,2 24,5 54,5 17,0 3,1 HCS-08-CE-10L-M-W3 .21 .32 .96 2.15 .67 6.84 08 5/16'' -05 M18x1,5 -06 5,4 8,2 25,5 55,5 19,0 3,6 HCS-08-CE-12L-M-W3 .21 .32 1.00 2.19 .75 7.83 10 3/8'' -06 M18x1,5 -06 6,5 9,9 25,5 59,0 19,0 4,1 HCS-10-CE-12L-M-W3 .26 .39 1.00 2.32 .75 9.04 10 3/8'' -06 M16x1,5 -05 6,5 9,9 24,5 58,0 17,0 3,7 HCS-10-CE-10L-M-W3 .26 .39 .96 2.28 .67 8.05 10 3/8'' -06 M22x1,5 -08 6,5 9,9 27,5 61,0 22,0 5,8 HCS-10-CE-15L-M-W3 .26 .39 1.08 2.40 .87 12.79 12 1/2'' -08 M22x1,5 -08 9,5 13,0 28,0 63,5 22,0 6,6 HCS-12-CE-15L-M-W3 .37 .51 1.10 2.50 .87 14.55 12 1/2'' -08 M18x1,5 -06 9,5 13,0 26,5 62,0 19,0 5,1 HCS-12-CE-12L-M-W3 .37 .51 1.04 2.44 .75 11.14 12 1/2'' -08 M26x1,5 -10 9,5 13,0 29,5 65,0 27,0 9,1 HCS-12-CE-18L-M-W3 .37 .51 1.16 2.56 1.06 19.96 16 5/8'' -10 M26x1,5 -10 12,6 16,0 29,0 67,5 27,0 9,3 HCS-16-CE-18L-M-W3 .50 .63 1.14 2.66 1.06 20.51 19 3/4'' -12 M30x2 -12 12,6 16,0 32,0 70,5 30,0 11,2 HCS-16-CE-22L-M-W3 .50 .63 1.26 2.78 1.18 24.70 19 3/4'' -12 M30x2 -12 14,8 19,1 32,5 78,5 30,0 13,2 HCS-19-CE-22L-M-W3 .58 .75 1.28 3.09 1.18 29.00 25 1'' -16 M36x2 -16 20,0 25,9 34,5 89,5 36,0 23,0 HCS-25-CE-28L-M-W3 .79 1.02 1.36 3.52 1.42 50.60 19 3/4'' -12 M30x2 -12 20,0 25,9 34,5 89,5 30,0 18,1 HCS-25-CE-22L-M-W3 .79 1.02 1.36 3.52 1.18 39.91 31 1 1/4'' -20 M45x2 -20 26,0 32,5 39,5 99,5 46,0 38,5 HCS-31-CE-35L-M-W3 1.02 1.28 1.56 3.92 1.81 84.89 38 1 1/2'' -24 M52x2 -24 31,0 38,9 42,5 110,0 55,0 58,3 HCS-38-CE-42L-M-W3 1.22 1.53 1.67 4.33 2.17 128.44 Related Products and Accessories Swage Ferrules Pages 14-21 ECOVOS VA Version Page 102 MULTIVOS Version Page 142
A 23 www.stauff.com/4/en/#23 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors D D1 A X L SW 24° Straight Insert with Male Metric Thread and 24° Conical Bore Type CES (Heavy Series) Connection Type Male Metric Thread Sealing Type 24° Conical Bore (Shape W acc. to DIN 3861) Standard ISO 8434-1 Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Suitable for use with mobile interlocking protection (nominal sizes DN 16 to DN 31) Hose Size Connection Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash Thread Dash D D1 X L SW (Hex) per 100 05 1/8'' -03 M16x1,5 -03 2,9 5,1 24,0 49,0 17,0 2,9 HCS-05-CE-08S-M-W3 .11 .20 .94 1.93 .67 6.39 06 1/4'' -04 M18x1,5 -04 3,9 6,7 26,5 56,5 19 4,0 HCS-06-CE-10S-M-W3 .15 .26 1.04 2.22 .75 8.82 06 1/4'' -04 M16x1,5 -03 3,9 6,7 25,5 55,5 17 3,3 HCS-06-CE-08S-M-W3 .15 .26 1.00 2.19 .67 7.28 06 1/4'' -04 M20x1,5 -05 3,9 6,7 27,5 57,5 22 5,2 HCS-06-CE-12S-M-W3 .15 .26 1.08 2.26 .87 11.36 08 5/16'' -05 M20x1,5 -05 5,4 8,2 27,5 57,5 22,0 5,3 HCS-08-CE-12S-M-W3 .21 .32 1.08 2.26 .87 11.69 10 3/8'' -06 M22x1,5 -06 6,5 9,9 29,5 63,0 22,0 6,5 HCS-10-CE-14S-M-W3 .26 .39 1.16 2.48 .87 14.22 10 3/8'' -06 M20x1,5 -05 6,5 9,9 27,5 61,0 22,0 5,9 HCS-10-CE-12S-M-W3 .26 .39 1.08 2.40 .87 13.01 12 1/2'' -08 M24x1,5 -08 9,5 13,0 30,0 65,5 24,0 8,0 HCS-12-CE-16S-M-W3 .37 .51 1.18 2.58 .94 17.53 12 1/2'' -08 M20x1,5 -05 9,5 13,0 28,0 63,5 22,0 6,6 HCS-12-CE-12S-M-W3 .37 .51 1.10 2.50 .87 14.44 12 1/2'' -08 M22x1,5 -06 9,5 13,0 30,0 65,5 22,0 7,3 HCS-12-CE-14S-M-W3 .37 .51 1.18 2.58 .87 16.10 12 1/2'' -08 M30x2 -10 9,5 13,0 34,0 70,0 30,0 13,1 HCS-12-CE-20S-M-W3 .37 .51 1.34 2.76 1.18 28.89 16 5/8'' -10 M30x2 -10 12,6 16,0 34,0 72,5 30,0 12,9 HCS-16-CE-20S-M-W3 .50 .63 1.34 2.85 1.18 28.33 16 5/8'' -10 M36x2 -12 12,6 16,0 37,0 75,5 36,0 19,7 HCS-16-CE-25S-M-W3 .50 .63 1.46 2.97 1.42 43.44 19 3/4'' -12 M36x2 -12 14,8 19,1 37,5 83,5 36,0 20,4 HCS-19-CE-25S-M-W3 .58 .75 1.48 3.29 1.42 44.87 19 3/4'' -12 M30x2 -10 14,8 19,1 34,5 80,5 30,0 14,8 HCS-19-CE-20S-M-W3 .58 .75 1.36 3.17 1.18 32.63 25 1'' -16 M42x2 -16 20,0 25,9 42,5 97,5 46,0 36,4 HCS-25-CE-30S-M-W3 .79 1.02 1.67 3.84 1.81 80.26 25 1'' -16 M36x2 -12 20,0 25,9 38,5 93,5 36,0 25,5 HCS-25-CE-25S-M-W3 .79 1.02 1.52 3.68 1.42 56.23 25 1'' -16 M52x2 -20 20,0 25,9 46,5 101,5 55,0 55,7 HCS-25-CE-38S-M-W3 .79 1.02 1.83 4.00 2.17 122.71 31 1 1/4'' -20 M52x2 -20 26,0 32,5 47,5 107,5 55,0 57,30 HCS-31-CE-38S-M-W3 1.02 1.28 1.87 4.23 2.17 126.35 25 1'' -16 M52x2 -20 20,0 25,9 46,5 101,5 55,0 55,7 HCS-25-CE-38S-M-W3 .79 1.02 1.83 4.00 2.17 122.71 Related Products and Accessories Swage Ferrules Pages 14-21 ECOVOS VA Version Page 103 MULTIVOS Version Page 143 Mobile Interlocking Protection Page 88
A 24 www.stauff.com/4/en/#24 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors X L A D D1 SW Straight Insert with Female Metric Nut Thread and 24° Taper / O-Ring Type DKOL (Light Series) Connection Type Female Metric Nut Thread Sealing Type 24° Taper with O-Ring Standard ISO 8434-1 Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Sealing Material NBR (Buna-N®) Hose Size Connection Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash Thread Dash D D1 X L SW (Hex) per 100 05 1/8" -03 M12x1,5 -03 2,9 5,1 24,5 49,0 14,0 2,1 HCS-05-DKO-06L-S-OR-B-M-W3 .11 .20 .96 1.93 .55 4.63 06 1/4" -04 M14x1,5 -04 3,9 6,7 24,5 54,0 17,0 3,3 HCS-06-DKO-08L-S-OR-B-M-W3 .15 .26 .96 2.13 .67 7.17 06 1/4" -04 M12x1,5 -03 3,9 6,7 21,0 51,0 14,0 2,3 HCS-06-DKO-06L-W-OR-B-M-W3 .15 .26 .83 2.01 .55 5.07 06 1/4" -04 M12x1,5 -03 3,9 6,7 21,0 51,0 17,0 3,2 HCS-06-DKO-06L-W-OR-B-M-W3-SW17 .15 .26 .83 2.01 .67 7.06 06 1/4" -04 M16x1,5 -05 3,9 6,7 26,0 55,5 19,0 4,0 HCS-06-DKO-10L-S-OR-B-M-W3 .15 .26 1.02 2.19 .75 8.82 06 1/4" -04 M18x1,5 -08 3,9 6,7 29,0 59,0 22,0 5,3 HCS-06-DKO-12L-S-OR-B-M-W3 .15 .26 1.14 2.32 .87 11.69 08 5/16" -05 M16x1,5 -05 5,4 8,2 26,0 55,5 19,0 4,2 HCS-08-DKO-10L-S-OR-B-M-W3 .21 .32 1.02 2.19 .75 9.26 08 5/16" -05 M14x1,5 -04 5,4 8,2 22,0 52,0 17,0 3,3 HCS-08-DKO-08L-W-OR-B-M-W3 .21 .32 .87 2.05 .67 7.28 08 5/16" -05 M18x1,5 -06 5,4 8,2 30,0 60,0 22,0 5,7 HCS-08-DKO-12L-S-OR-B-M-W3 .21 .32 1.18 2.36 .87 12.46 10 3/8" -06 M18x1,5 -06 6,5 9,9 26,0 59,0 22,0 6,0 HCS-10-DKO-12L-S-OR-B-M-W3 .26 .39 1.02 2.32 .87 13.12 10 3/8" -06 M16x1,5 -05 6,5 9,9 22,5 56,0 19,0 4,6 HCS-10-DKO-10L-W-OR-B-M-W3 .26 .39 .89 2.20 .75 10.14 10 3/8" -06 M22x1,5 -08 6,5 9,9 25,0 58,5 27,0 8,7 HCS-10-DKO-15L-S-OR-B-M-W3 .26 .39 .98 2.30 1.06 19.18 12 1/2" -08 M22x1,5 -08 9,5 13,0 25,5 61,0 27,0 8,9 HCS-12-DKO-15L-S-OR-B-M-W3 .37 .51 1.00 2.40 1.06 19.51 12 1/2" -08 M18x1,5 -06 9,5 13,0 24,0 59,5 22,0 6,50 HCS-12-DKO-12L-W-OR-B-M-W3 .37 .51 .94 2.34 .87 14.33 12 1/2" -08 M26x1,5 -10 9,5 13,0 34,5 70,0 32,0 13,15 HCS-12-DKO-18L-S-OR-B-M-W3 .37 .51 1.36 2.76 1.26 29.00 16 5/8" -10 M26x1,5 -10 12,6 16,0 28,0 66,5 32,0 12,5 HCS-16-DKO-18L-S-OR-B-M-W3 .50 .63 1.10 2.62 1.26 27.56 16 5/8" -10 M30x2 -12 12,6 16,0 34,5 73,0 36,0 17,1 HCS-16-DKO-22L-S-OR-B-M-W3 .50 .63 1.36 2.87 1.42 37.71 16 5/8" -10 M22x1,5 -08 12,6 16,0 44,5 83,0 27,0 13,8 HCS-16-DKO-15L-S-OR-B-B-W3 .50 .63 1.75 3.27 1.06 30.43 16 5/8" -10 M26x1,5 -10 12,6 16,0 28,0 66,5 32,0 12,5 HCS-16-DKO-18L-S-OR-B-M-W3 .50 .63 1.10 2.62 1.26 27.56 16 5/8" -10 M30x2 -12 12,6 16,0 34,5 73,0 36,0 17,1 HCS-16-DKO-22L-S-OR-B-M-W3 .50 .63 1.36 2.87 1.42 37.71 16 5/8" -10 M22x1,5 -08 12,6 16,0 44,5 83,0 27,0 13,8 HCS-16-DKO-15L-S-OR-B-B-W3 .50 .63 1.75 3.27 1.06 30.43 Related Products and Accessories Swage Ferrules Pages 14-21 45° Version Pages 26-27 ECOVOS VA Version Page 107 MULTIVOS Version Page 144 90° Version Pages 28-29
A 25 www.stauff.com/4/en/#25 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors X L A D D1 SW Straight Insert with Female Metric Nut Thread and 24° Taper / O-Ring Type DKOL (Light Series) Connection Type Female Metric Nut Thread Sealing Type 24° Taper with O-Ring Standard ISO 8434-1 Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Sealing Material NBR (Buna-N®) Hose Size Connection Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash Thread Dash D D1 X L SW (Hex) per 100 19 3/4" -12 M30x2 -12 14,8 19,1 30,0 76,0 36,0 18,4 HCS-19-DKO-22L-S-OR-B-M-W3 .58 .75 1.18 2.99 1.42 40.57 19 3/4" -12 M22x1,5 -08 14,8 19,1 24,0 70,0 27,0 11,9 HCS-19-DKO-15L-W-OR-B-M-W3 .58 .75 .94 2.76 1.06 26.13 19 3/4" -12 M26x1,5 -10 14,8 19,1 25,5 71,5 32,0 14,4 HCS-19-DKO-18L-W-OR-B-M-W3 .58 .75 1.00 2.81 1.26 31.64 19 3/4" -12 M36x2 -16 14,8 19,1 34,0 78,0 41,0 25,0 HCS-19-DKO-28L-S-OR-B-M-W3 .58 .75 1.34 3.07 1.61 55.13 25 1" -16 M36x2 -16 20,0 25,9 33,0 88,0 41,0 28,0 HCS-25-DKO-28L-S-OR-B-M-W3 .79 1.02 1.30 3.46 1.61 61.74 25 1" -16 M45x2 -20 20,0 25,9 36,0 91,0 50,0 42,2 HCS-25-DKO-35L-S-OR-B-M-W3 .79 1.02 1.42 3.58 1.97 92.94 25 1" -16 M30x2 -12 20,0 25,9 45,0 100,0 36,0 32,7 HCS-25-DKO-22L-S-OR-B-B-W3 .79 1.02 1.77 3.94 1.42 72.10 31 1 1/4" -20 M45x2 -20 26,0 32,5 37,0 97,0 50,0 43,8 HCS-31-DKO-35L-S-OR-B-M-W3 1.02 1.28 1.46 3.82 1.97 96.47 31 1 1/4" -20 M36x2 -16 26,0 32,5 47,5 107,5 50,0 47,3 HCS-31-DKO-28L-S-OR-B-B-W3 1.02 1.28 1.87 4.23 1.97 104.30 31 1 1/4" -20 M52x2 -24 26,0 32,5 55,0 115,0 60,0 73,8 HCS-31-DKO-42L-S-OR-B-B-W3 1.02 1.28 2.17 4.53 2.36 162.73 38 1 1/2" -24 M52x2 -24 31,0 38,9 35,5 103,0 60,0 66,0 HCS-38-DKO-42L-S-OR-B-M-W3 1.22 1.53 1.40 4.06 2.36 145.53 38 1 1/2" -24 M45x2 -20 31,0 38,9 56,0 123,5 50,0 71,5 HCS-38-DKO-35L-S-OR-B-B-W3 1.22 1.53 2.20 4.86 1.97 157.66 51 2" -32 M52x2 -24 40,0 51,6 59,5 134,5 60,0 132,8 HCS-51-DKO-42L-S-OR-B-B-W3 1.57 2.03 2.34 5.30 2.36 292.82 Related Products and Accessories Swage Ferrules Pages 14-21 45° Version Pages 26-27 ECOVOS VA Version Page 107 MULTIVOS Version Page 144 90° Version Pages 28-29
A 26 www.stauff.com/4/en/#26 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors Y L X A SW D D1 45° Elbow Insert with Female Metric Nut Thread and 24° Taper / O-Ring Type DKOL 45° (Light Series) Connection Type Female Metric Nut Thread Sealing Type 24° Taper with O-Ring Standard ISO 8434-1 Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Sealing Material NBR (Buna-N®) Hose Size Connection Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash Thread Dash D D1 X L Y SW (Hex) per 100 05 1/8" -03 M12x1,5 -03 2,9 5,1 31,8 56,5 15,0 14,0 2,3 HCS-05-DKO-06L-045-S-OR-B-M-W3 .11 .20 1.25 2.22 .59 .55 5.07 06 1/4" -04 M12x1,5 -03 3,9 6,7 36,5 66,5 18,0 14,0 3,1 HCS-06-DKO-06L-045-W-OR-B-M-W3 .15 .26 1.44 2.62 .71 .55 6.73 06 1/4" -04 M14x1,5 -04 3,9 6,7 36,0 66,0 16,0 17,0 3,6 HCS-06-DKO-08L-045-S-OR-B-M-W3 .15 .26 1.42 2.60 .63 .67 7.94 06 1/4" -04 M16x1,5 -05 3,9 6,7 38,5 68,5 18,5 19,0 4,9 HCS-06-DKO-10L-045-S-OR-B-M-W3 .15 .26 1.52 2.70 .73 .75 10.69 06 1/4" -04 M18x1,5 -06 3,9 6,7 39,5 69,5 18,5 22,0 6,0 HCS-06-DKO-12L-045-S-OR-B-M-W3 .15 .26 1.56 2.74 .73 .87 13.23 08 5/16" -05 M16x1,5 -05 5,4 8,2 38,5 68,5 18,5 19,0 5,0 HCS-08-DKO-10L-045-S-OR-B-M-W3 .21 .32 1.52 2.70 .73 .75 10.91 08 5/16" -05 M18x1,5 -06 5,4 8,2 40,0 70,0 18,0 22,0 6,3 HCS-08-DKO-12L-045-S-OR-B-M-W3 .21 .32 1.57 2.76 .71 .87 13.89 08 5/16" -05 M14x1,5 -04 5,4 8,2 50,0 80,0 20,0 17,0 5,7 HCS-08-DKO-08L-045-S-OR-B-B-W3 .21 .32 1.97 3.15 .79 .67 12.57 10 3/8" -06 M16x1,5 -05 6,5 9,9 44,0 77,0 19,5 19,0 6,5 HCS-10-DKO-10L-045-W-OR-B-M-W3 .26 .39 1.73 3.03 .77 .75 14.33 10 3/8" -06 M18x1,5 -06 6,5 9,9 41,5 74,5 17,5 22,0 7,2 HCS-10-DKO-12L-045-S-OR-B-M-W3 .26 .39 1.63 2.93 .69 .87 15.88 10 3/8" -06 M22x1,5 -08 6,5 9,9 48,0 82,0 19,5 27,0 11,4 HCS-10-DKO-15L-045-S-OR-B-B-W3 .26 .39 1.89 3.23 .77 1.06 25.14 12 1/2" -08 M22x1,5 -08 9,5 13,0 46,0 81,5 21,0 27,0 11,1 HCS-12-DKO-15L-045-S-OR-B-M-W3 .37 .51 1.81 3.21 .83 1.06 24.48 12 1/2" -08 M18x1,5 -06 9,5 13,0 49,5 85,0 19,5 22,0 11,0 HCS-12-DKO-12L-045-W-OR-B-B-W3 .37 .51 1.95 3.35 .77 .87 24.26 12 1/2" -08 M26x1,5 -10 9,5 13,0 67,0 102,5 27,5 32,0 20,5 HCS-12-DKO-18L-045-S-OR-B-B-W3 .37 .51 2.64 4.04 1.08 1.26 45.20 16 5/8" -10 M26x1,5 -10 12,6 16,0 54,0 92,0 24,0 32,0 15,9 HCS-16-DKO-18L-045-S-OR-B-M-W3 .50 .63 2.13 3.62 .94 1.26 35.06 16 5/8" -10 M22x1,5 -08 12,6 16,0 56,5 95,0 22,0 27,0 16,2 HCS-16-DKO-15L-045-S-OR-B-B-W3 .50 .63 2.22 3.74 .87 1.06 35.72 16 5/8" -10 M30x2 -12 12,6 16,0 72,0 110,5 29,5 36,0 29,20 HCS-16-DKO-22L-045-S-OR-B-B-W3 .50 .63 2.83 4.35 1.16 1.42 64.39 Dimension Y ± 2,5 mm / .10in Related Products and Accessories Swage Ferrules Pages 14-21 Straight Version Pages 24-25 ECOVOS VA Version Page 108 MULTIVOS Version Page 145 90° Version Pages 28-29
A 27 www.stauff.com/4/en/#27 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors Y L X A SW D D1 45° Elbow Insert with Female Metric Nut Thread and 24° Taper / O-Ring Type DKOL 45° (Light Series) Connection Type Female Metric Nut Thread Sealing Type 24° Taper with O-Ring Standard ISO 8434-1 Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Sealing Material NBR (Buna-N®) Hose Size Connection Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash Thread Dash D D1 X L Y SW (Hex) per 100 19 3/4" -12 M30x2 -12 14,8 19,1 67,0 113,0 25,5 36,0 25,70 HCS-19-DKO-22L-045-S-OR-B-M-W3 .58 .75 2.64 4.45 1.00 1.42 56.67 19 3/4" -12 M26x1,5 -10 14,8 19,1 67,5 113,5 27,5 32,0 24,20 HCS-19-DKO-18L-045-S-OR-B-B-W3 .58 .75 2.66 4.47 1.08 1.26 53.36 19 3/4" -12 M36x2 -16 14,8 19,1 73,5 119,5 29,5 41,0 34,80 HCS-19-DKO-28L-045-S-OR-B-B-W3 .58 .75 2.89 4.70 1.16 1.61 76.73 25 1" -16 M36x2 -16 20,0 25,9 80,0 135,0 33,0 41,0 41,80 HCS-25-DKO-28L-045-S-OR-B-M-W3 .79 1.02 3.15 5.31 1.30 1.61 92.17 25 1" -16 M30x2 -12 20,0 25,9 74,5 129,5 29,5 36,0 39,03 HCS-25-DKO-22L-045-S-OR-B-B-W3 .79 1.02 2.93 5.10 1.16 1.42 86.06 25 1" -16 M45x2 -20 20,0 25,9 82,5 138,0 34,5 50,0 58,00 HCS-25-DKO-35L-045-S-OR-B-B-W3 .79 1.02 3.25 5.43 1.36 1.97 127.89 31 1 1/4" -20 M45x2 -20 26,0 32,5 99,5 159,5 39,5 50,0 70,70 HCS-31-DKO-35L-045-S-OR-B-M-W3 1.02 1.28 3.92 6.28 1.56 1.97 155.89 31 1 1/4" -20 M36x2 -16 26,0 32,5 85,0 145,0 33,0 41,0 59,05 HCS-31-DKO-28L-045-S-OR-B-B-W3 1.02 1.28 3.35 5.71 1.30 1.61 130.21 31 1 1/4" -20 M52x2 -24 26,0 32,5 117,0 177,0 47,5 60,0 101,35 HCS-31-DKO-42L-045-S-OR-B-B-W3 1.02 1.28 4.61 6.97 1.87 2.36 223.48 38 1 1/2" -24 M52x2 -24 31,0 38,9 107,5 175,0 38,5 60,0 102,30 HCS-38-DKO-42L-045-S-OR-B-M-W3 1.22 1.53 4.23 6.89 1.52 2.36 225.57 38 1 1/2" -24 M45x2 -20 31,0 38,9 106,5 174,5 43,0 50,0 91,75 HCS-38-DKO-35L-045-S-OR-B-B-W3 1.22 1.53 4.19 6.87 1.69 1.97 202.31 Dimension Y ± 2,5 mm / .10in Related Products and Accessories Swage Ferrules Pages 14-21 Straight Version Pages 24-25 ECOVOS VA Version Page 108 MULTIVOS Version Page 145 90° Version Pages 28-29
A 28 www.stauff.com/4/en/#28 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors Y X L A D D1 SW 90° Elbow Insert with Female Metric Nut Thread and 24° Taper / O-Ring Type DKOL 90° (Light Series) Connection Type Female Metric Nut Thread Sealing Type 24° Taper with O-Ring Standard ISO 8434-1 Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Sealing Material NBR (Buna-N®) Hose Size Connection Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash Thread Dash D D1 X L Y SW (Hex) per 100 05 1/8" -03 M12x1,5 -03 2,9 5,1 23,5 48,0 27,0 14,0 2,5 HCS-05-DKO-06L-090-S-OR-B-M-W3 .11 .20 .93 1.89 1.06 .55 5.51 06 1/4" -04 M12x1,5 -03 3,9 6,7 25,0 55,0 32,5 14 3,3 HCS-06-DKO-06L-090-W-OR-B-M-W3 .15 .26 .98 2.17 1.28 .55 7.28 06 1/4" -04 M14x1,5 -04 3,9 6,7 29,5 59,5 29,0 17 3,9 HCS-06-DKO-08L-090-S-OR-B-M-W3 .15 .26 1.16 2.34 1.14 .67 8.60 06 1/4" -04 M16x1,5 -05 3,9 6,7 31,0 61,0 31,5 19 5,4 HCS-06-DKO-10L-090-S-OR-B-M-W3 .15 .26 1.22 2.40 1.24 .75 11.91 06 1/4" -04 M18x1,5 -06 3,9 6,7 30,5 60,5 33,0 22 6,5 HCS-06-DKO-12L-090-S-OR-B-M-W3 .15 .26 1.20 2.38 1.30 .87 14.33 08 5/16" -05 M14x1,5 -04 5,4 8,2 31,0 61,0 35,5 17 5,2 HCS-08-DKO-08L-090-W-OR-B-M-W3 .21 .32 1.22 2.40 1.40 .67 11.47 08 5/16" -05 M16x1,5 -05 5,4 8,2 31,0 61,0 31,5 19 5,5 HCS-08-DKO-10L-090-S-OR-B-M-W3 .21 .32 1.22 2.40 1.24 .75 12.02 08 5/16" -05 M18x1,5 -06 5,4 8,2 31,0 61,0 33,0 22 6,8 HCS-08-DKO-12L-090-S-OR-B-M-W3 .21 .32 1.22 2.40 1.30 .87 14.99 10 3/8" -06 M16x1,5 -05 6,5 9,9 38,5 71,5 39,0 19 7,7 HCS-10-DKO-10L-090-W-OR-B-M-W3 .26 .39 1.52 2.81 1.54 .75 16.98 10 3/8" -06 M18x1,5 -06 6,5 9,9 37,5 71,0 36,0 22 8,4 HCS-10-DKO-12L-090-S-OR-B-M-W3 .26 .39 1.48 2.80 1.42 .87 18.41 10 3/8" -06 M22x1,5 -08 6,5 9,9 39,0 72,5 38,5 27 12,3 HCS-10-DKO-15L-090-S-OR-B-B-W3 .26 .39 1.54 2.85 1.52 1.06 27.01 12 1/2" -08 M22x1,5 -08 9,5 13,0 40,5 76,0 42,5 27 12,9 HCS-12-DKO-15L-090-S-OR-B-M-W3 .37 .51 1.59 2.99 1.67 1.06 28.42 12 1/2" -08 M26x1,5 -10 9,5 13,0 55,5 91,0 54,0 32 22,8 HCS-12-DKO-18L-090-S-OR-B-B-W3 .37 .51 2.19 3.58 2.13 1.26 50.27 16 5/8" -10 M26x1,5 -10 12,6 16,0 46,0 84,0 53,5 32 18,4 HCS-16-DKO-18L-090-S-OR-B-M-W3 .50 .63 1.81 3.31 2.11 1.26 40.57 16 5/8" -10 M22x1,5 -08 12,6 16,0 46,5 85,0 44,5 27 17,7 HCS-16-DKO-15L-090-S-OR-B-B-W3 .50 .63 1.83 3.35 1.75 1.06 38.92 16 5/8" -10 M30x2 -12 12,6 16,0 62,5 101,0 61,0 36 33,3 HCS-16-DKO-22L-090-S-OR-B-B-W3 .50 .63 2.46 3.98 2.40 1.42 73.43 Dimension Y ± 2,5 mm / .10in Related Products and Accessories Swage Ferrules Pages 14-21 Straight Version Pages 24-25 ECOVOS VA Version Page 109 MULTIVOS Version Page146 45° Version Pages 26-27
A 29 www.stauff.com/4/en/#29 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors Y X L A D D1 SW 90° Elbow Insert with Female Metric Nut Thread and 24° Taper / O-Ring Type DKOL 90° (Light Series) Connection Type Female Metric Nut Thread Sealing Type 24° Taper with O-Ring Standard ISO 8434-1 Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Sealing Material NBR (Buna-N®) Hose Size Connection Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash Thread Dash D D1 X L Y SW (Hex) per 100 19 3/4" -12 M30x2 -12 14,8 19,1 57,5 103,0 57,0 36 29,6 HCS-19-DKO-22L-090-S-OR-B-M-W3 .58 .75 2.26 4.06 2.24 1.42 65.16 19 3/4" -12 M26x1,5 -10 14,8 19,1 56,0 102,0 54,0 32 26,5 HCS-19-DKO-18L-090-S-OR-B-B-W3 .58 .75 2.20 4.02 2.13 1.26 58.43 19 3/4" -12 M36x2 -16 14,8 19,1 63,0 109,0 61,0 41 38,9 HCS-19-DKO-28L-090-S-OR-B-B-W3 .58 .75 2.48 4.29 2.40 1.61 85.77 25 1" -16 M36x2 -16 20,0 25,9 72,0 127,0 63,0 41 48,2 HCS-25-DKO-28L-090-S-OR-B-M-W3 .79 1.02 2.83 5.00 2.48 1.61 106.17 25 1" -16 M30x2 -12 20,0 25,9 64,0 119,0 61,0 36 43,2 HCS-25-DKO-22L-090-S-OR-B-B-W3 .79 1.02 2.52 4.69 2.40 1.42 95.15 25 1" -16 M45x2 -20 20,0 25,9 74,0 129,0 73,0 50 65,9 HCS-25-DKO-35L-090-S-OR-B-B-W3 .79 1.02 2.91 5.08 2.87 1.97 145.20 31 1 1/4" -20 M45x2 -20 26,0 32,5 90,5 150,5 81,0 50 82,6 HCS-31-DKO-35L-090-S-OR-B-M-W3 1.02 1.28 3.56 5.93 3.19 1.97 182.13 31 1 1/4" -20 M36x2 -16 26,0 32,5 76,5 136,5 71,0 41 66,8 HCS-31-DKO-28L-090-S-OR-B-B-W3 1.02 1.28 3.01 5.37 2.80 1.61 147.29 31 1 1/4" -20 M52x2 -24 26,0 32,5 104,5 164,5 102,0 60 118,0 HCS-31-DKO-42L-090-S-OR-B-B-W3 1.02 1.28 4.11 6.48 4.02 2.36 260.08 38 1 1/2" -24 M52x2 -24 31,0 38,9 101,0 168,5 88,0 60 117,9 HCS-38-DKO-42L-090-S-OR-B-M-W3 1.22 1.53 3.98 6.63 3.46 2.36 259.97 38 1 1/2" -24 M45x2 -20 31,0 38,9 94,5 162,5 91,0 50 104,3 HCS-38-DKO-35L-090-S-OR-B-B-W3 1.22 1.53 3.72 6.40 3.58 1.97 229.98 Dimension Y ± 2,5 mm / .10in Related Products and Accessories Swage Ferrules Pages 14-21 Straight Version Pages 24-25 ECOVOS VA Version Page 109 MULTIVOS Version Page146 45° Version Pages 26-27
A 30 www.stauff.com/4/en/#30 Catalogue 4 § Edition 06/2023 ECOVOS Carbon Steel Hose Connectors X L D D1 A SW Straight Insert with Female Metric Nut Thread and 24° Taper / O-Ring Type DKOS (Heavy Series) Connection Type Female Metric Nut Thread Sealing Type 24° Taper with O-Ring Standard ISO 8434-1 Material Carbon Steel Surface Finishing Zinc/Nickel-Plating Sealing Material NBR (Buna-N®) Suitable for use with mobile interlocking protection (nominal sizes DN 16 to DN 31) Hose Size Connection Size Dimensions Weight Ordering Codes ( mm / in ) ( kg / lbs )ca. DN inch Dash Thread Dash D D1 X L SW (Hex) per 100 05 1/8" -03 M16x1,5 -03 2,9 5,1 26,0 50,5 19,0 3,6 HCS-05-DKO-08S-S-OR-B-M-W3 .11 .20 1.02 1.99 .75 7.94 06 1/4" -04 M18x1,5 -04 3,9 6,7 26,0 55,5 22,0 5,3 HCS-06-DKO-10S-S-OR-B-M-W3 .15 .26 1.02 2.19 .87 11.69 06 1/4" -04 M14x1,5 -02 3,9 6,7 26,0 56,0 17,0 3,5 HCS-06-DKO-06S-W-OR-B-M-W3 .15 .26 1.02 2.20 .67 7.72 06 1/4" -04 M16x1,5 -03 3,9 6,7 24,5 54,0 19,0 3,9 HCS-06-DKO-08S-S-OR-B-M-W3 .15 .26 .96 2.13 .75 8.49 06 1/4" -04 M20x1,5 -05 3,9 6,7 44,5 74,5 24,0 8,2 HCS-06-DKO-12S-S-OR-B-B-W3 .15 .26 1.75 2.93 .94 17.97 08 1/2" -08 M20x1,5 -05 5,4 8,2 30,0 60,0 24 6,6 HCS-08-DKO-12S-S-OR-B-M-W3 .21 .32 1.18 2.36 .94 14.55 08 1/2" -08 M18x1,5 -04 5,4 8,2 26,0 55,5 22 5,4 HCS-08-DKO-10S-S-OR-B-M-W3 .21 .32 1.02 2.19 .87 11.91 08 1/2" -08 M18x1,5 -06 5,4 8,2 30,0 60,0 22,0 5,7 HCS-08-DKO-12L-S-OR-B-M-W3 .21 .32 1.18 2.36 .87 12.46 10 3/8" -06 M22x1,5 -06 6,5 9,9 30,5 64,0 27 9,7 HCS-10-DKO-14S-S-OR-B-M-W3 .26 .39 1.20 2.52 1.06 21.39 10 3/8" -06 M20x1,5 -05 6,5 9,9 26,0 59,0 24 6,9 HCS-10-DKO-12S-S-OR-B-M-W3 .26 .39 1.02 2.32 .94 15.21 10 3/8" -06 M24x1,5 -08 6,5 9,9 32,0 65,5 30 11,7 HCS-10-DKO-16S-S-OR-B-M-W3 .26 .39 1.26 2.58 1.18 25.80 10 3/8" -06 M18x1,5 -04 6,5 9,9 44,0 77,5 22 8,3 HCS-10-DKO-10S-S-OR-B-B-W3 .26 .39 1.73 3.05 .87 18.30 12 1/2" -08 M24x1,5 -08 9,5 13,0 32,0 67,5 30 12,5 HCS-12-DKO-16S-S-OR-B-M-W3 .37 .51 1.26 2.66 1.18 27.56 12 5/16" -05 M20x1,5 -05 9,5 13,0 24,5 60,0 24 7,2 HCS-12-DKO-12S-W-OR-B-M-W3 .37 .51 .96 2.36 .94 15.88 12 1/2" -08 M22x1,5 -06 9,5 13,0 26,5 62,0 27 9,8 HCS-12-DKO-14S-W-OR-B-M-W3 .37 .51 1.04 2.44 1.06 21.61 12 1/2" -08 M30x2 -10 9,5 13,0 63,5 99,0 36 25,1 HCS-12-DKO-20S-S-OR-B-B-W3 .37 .51 2.50 3.90 1.42 55.24 16 5/8" -10 M30x2 -10 12,6 16,0 33,5 72,0 36 18,7 HCS-16-DKO-20S-S-OR-B-M-W3 .50 .63 1.32 2.83 1.42 41.12 16 5/8" -10 M24x1,5 -08 12,6 16,0 26,5 65,0 30 12,5 HCS-16-DKO-16S-W-OR-B-M-W3 .50 .63 1.04 2.56 1.18 27.56 16 5/8" -10 M36x2 -12 12,6 16,0 52,0 90,5 46 40,1 HCS-16-DKO-25S-S-OR-B-B-W3 .50 .63 2.05 3.56 1.81 88.31 Related Products and Accessories Swage Ferrules Pages 14-21 45° Version Pages 32-33 ECOVOS VA Version Page 110 MULTIVOS Version Page 147 90° Version Pages 34-35 POWERVOS Version Page 180 Mobile Interlocking Protection Page 88
RkJQdWJsaXNoZXIy ODUyNzU=