87 www.stauff.com Hose Type Indentification Symbols 2SNK 2SN 4SP 4SH 4SH Standard Hose Assembly Hose Connector Standard + Mobile Interlocking Protection Ring (high pressure) HAE Hose Type High Tensile Steel reinforced four spiral hose EN 856 4SH. ISO 3862-1 4SH (MSHA) 4SH Hose Size 3/4" hose inside diameter 19 1" hose inside diameter 25 1-1/4" hose inside diameter 31 Assembly Length The length of the hose in mm measured to DIN 20066 (centres). Any hose longer than 99999 mm is classed as non standard. Maximum 5 digits. Refer to diagram below: Fitting Type 24° Male cone metric external thread defined in L (Light) or in S (Heavy) EN8434-1 ISO17165 CE 24° Female cone O-Ring defined in L (Light) or in S (Heavy) EN8434-1 ISO17165 DKO 60° Male cone BSPP external thread EN8434-6 BS5200 AGR 60° Female cone BSPP nut thread EN8434-6 BS5200 DKR JIC 37° Male UN/ UNF external thread EN ISO 8434-2 SAE J514 AGJ JIC 37° Female cone UN/ UNF nut thread EN ISO8434-2 SAE J514 DKJ Female Flat sealing UN/UNF nut thread SAE J1453 ORS Flange Standard pressure SAE J518 (3000 PSI Series) SFL Flange High pressure SAE J518 (6000 PSI Series) SFS Connection Size 1/4 (BSPP, BSPT, NPT) 7/16 (JIC, UNF) 04 1/2 (JIC, UNF) 05 3/8 (BSPP, BSPT, NPT) 9/16 (JIC, UNF) 06 1/2 (BSPP, BSPT, NPT, SAE) 3/4 (JIC, UNF) 08 5/8 (BSPP, BSPT, NPT) 7/8 (JIC, UNF) 10 3/4 (BSPP, BSPT, NPT, SAE) 1-1/16 (JIC, UNF) 12 1 (BSPP, BSPT, NPT, SAE) 1-5/16 (JIC, UNF) 16 1-1/4 (BSPP, BSPT, NPT, SAE) 1-5/8 (JIC, UNF) 20 1-1/2 (BSPP, BSPT, NPT, SAE) 1-7/8 (JIC, UNF) 24 2 (BSPP, BSPT, NPT, SAE) 2-1/2 (JIC, UNF) 32 Metric Threads (DIN 2353 sizes) For Metric threads which are specified in L or S series, define Series and then size. E.g.S30 L Series: 06, 08, 10, 12, 15, 18, 22, 28, 35, 42. S Series: 06, 08, 10, 12, 14, 16, 20, 25, 30, 38 Metric Threads (non DIN sizes) For Metric threads which are not specified in L or S series, just define the Metric size and not the pitch size. E.g. M16x1.5 = M16 Angle of Fitting Straight Insert (None) 45 Degree Swept Angle Insert A 90 Degree Swept Angle Insert B a b c d e g f Hose assembly length (DIN 20066) L = Hose assembly length Hose Assemblies for Type HOS-4SH Order Codes - Same Fitting Type and Connection Size Basic Material Of End Connections & Ferrules carbon steel 0 Orientation Settings in line (0 degrees) 0 0 45 degree orientation 1 1 90 degree orientation 2 2 135 degree orientation 3 3 180 degree orientation 4 4 225 degree orientation 5 5 270 degree orientation 6 6 315 degree orientation 7 7 Hose Protection no hose protection 0 Spiral Hose Protector (HPR-SHP) 1 Hose Sleeve (HRP-SLE) (MSHA) 4 Hose Strip (HRP-STR) 8 Hose Velcro® Wrap (HRP-HVW) 9 Pressure Testing no testing required 0 Pressure tested to country specific standard. Refer to Appendix. Supplied with certification 1 Air Pressure tested as per customer specification 2 Pressure tested (proof tested) to Mining Design Guidelines MDG41 (Australian standard for Mining Industy - Surface and Undergound) 3 h i k j Ordering CodesHAE- 4SH -25-1500-DKO S30 B-0 0 0 0 a b c d e f g hijk Tolerance +/- 5° 0 0 1 2 3 4 5 6 7 1 2 3 4 5 6 7
RkJQdWJsaXNoZXIy ODU4NjY4