99 www.stauff.com Hose Type Indentification Symbols 2SNK 2SN 4SP 4SH STAUFF Clean STAUFF Clean Nozzles / Nozzle Sets Universal Nozzle Set (SCN-U) The Universal Nozzle is designed with a tapered seat that will allow it to suit for 90% of applications, including Hose, Tube and Pipe, with or without fittings, in hydraulic and pneumatic pipe systems, condenser tubes, boiler tubes and food lines. The Universal Nozzle kit fits all and will accommodate applications with JIC, SAE and BSP end fittings. The set of 10 nozzles consists of the following sizes: 6 mm, 8 mm, 10 mm, 13 mm, 16 mm, 19 mm, 25 mm and 32 mm. Metric Tube Nozzle Set (SCN-M) The Metric Tube Nozzle is intended for use specifically with Metric sized tube and is designed to fit over the outside of the tube or pipe being cleaned. The inside diameter of the nozzle is reduced to match the inside diameter of the tube. The nozzles are machined from solid bar stock and designed for superior strength. The set of 18 nozzles consist of the following sizes: 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 15 mm, 16 mm, 18 mm, 20 mm, 22 mm, 25 mm, 28 mm, 30 mm, 35 mm, 38 mm, 42 mm, 50 mm and 60 mm. JIC Nozzle Set (SCN-J) The JIC Nozzle is designed specifically for use with JIC and SAE type fittings. The nozzles are machined to accommodate both male and female configuration, ensuring a perfect airtight seal every time. The set of 10 nozzles consist of the following sizes: 6 mm, 8 mm, 10 mm, 13 mm, 16 mm, 19 mm, 25 mm, 32 mm, 38 mm and 50 mm. BSP Nozzle Set (SCN-B) The BSP Nozzle is designed specifically for BSP configuration fittings. The nozzles are machined to accommodate both male and female configurations, ensuring a perfect airtight seal every time. The set of 7 nozzles consist of the following sizes: 6 mm, 10 mm, 13 mm, 16 mm, 19 mm, 25 mm and 32 mm. NPT Nozzle Set (SCN-N) The NPT Nozzle is designed specifically for NPT configuration fittings. The nozzles are machined to accommodate both male and female configurations, ensuring a perfect airtight seal every time. The set of 7 nozzles consist of the following sizes: 1/4 in, 3/8 in, 1/2 in, 5/8 in, 3/4 in, 1 in and 1 1/4 in. If required, nozzles can be supplied separately. Contact STAUFF for details. STAUFF Clean Projectiles Size Pipe / Tube / Hose ID Standard Series (SCP-S) Coupling Series (SCP-C) Abrasive Series (SCP-A) Grinding Series (SCP-G) (mm) (in) Item No Designation Item No Designation Item No Designation Item No Designation 07 4.8 3/16 1910021294 SCP-S-07-V100 1910021282 SCP-C-07-V100 1910021274 SCP-A-07-V100 1910021286 SCP-G-07-V100 10 6.4 1/4 1910021296 SCP-S-10-V100 1910003718 SCP-C-10-V100 1910021275 SCP-A-10-V100 1910021287 SCP-G-10-V100 12 7.9 5/16 1910021297 SCP-S-12-V100 1910003719 SCP-C-12-V100 1910003758 SCP-A-12-V100 1910003766 SCP-G-12-V100 14 9.5 3/8 1910021298 SCP-S-14-V100 1910003757 SCP-C-14-V100 1910003759 SCP-A-14-V100 1910003767 SCP-G-14-V100 16 11.1 7/16 1910003746 SCP-S-16-V100 1910003720 SCP-C-16-V100 1910003760 SCP-A-16-V100 1910003768 SCP-G-16-V100 18 12.7 1/2 1910021299 SCP-S-18-V100 1910003344 SCP-C-18-V100 1910003761 SCP-A-18-V100 1910003769 SCP-G-18-V100 20 14.3 9/16 1910021300 SCP-S-20-V100 1910003721 SCP-C-20-V100 1910003762 SCP-A-20-V100 1910003770 SCP-G-20-V100 22 15.9 5/8 1910021301 SCP-S-22-V100 1910003722 SCP-C-22-V100 1910003763 SCP-A-22-V100 1910003771 SCP-G-22-V100 26 19.1 3/4 1910021302 SCP-S-26-V50 1910003345 SCP-C-26-V50 1910003764 SCP-A-26-V50 1910003772 SCP-G-26-V50 30 22.2 7/8 1910021303 SCP-S-30-V40 1910003724 SCP-C-30-V40 1910003779 SCP-A-30-V40 1910003780 SCP-G-30-V40 33 25.4 1 1910021304 SCP-S-33-V40 1910003725 SCP-C-33-V40 1910021276 SCP-A-33-V40 1910021288 SCP-G-33-V40 36 26 / 27 1-1/16 1910021305 SCP-S-36-V30 1910021283 SCP-C-36-V30 1910021277 SCP-A-36-V30 1910021289 SCP-G-36-V30 40 31.8 1-1/4 1910021306 SCP-S-40-V30 1910003726 SCP-C-40-V30 1910021278 SCP-A-40-V30 1910021290 SCP-G-40-V30 45 34.9 1-3/8 1910021307 SCP-S-45-V20 1910021284 SCP-C-45-V20 1910021279 SCP-A-45-V20 1910021291 SCP-G-45-V20 50 38.1 1-1/2 1910021308 SCP-S-50-V20 1910003727 SCP-C-50-V20 1910021280 SCP-A-50-V20 1910021292 SCP-G-50-V20 60 50.8 2 1910021309 SCP-S-60-V15 1910003728 SCP-C-60-V15 1910021281 SCP-A-60-V15 1910021293 SCP-G-60-V15 Please note: For optimum cleaning, it is recommended that projectiles are used once and then discarded and disposed of in an appropriate way. Safety note: A mesh collection bag should be secured to the pipe, tube or hose exit to avoid possible injury to personnel by the projectile exiting at high velocity. Always wear protective safety glasses, ear protection and a dust mask when operating this system. Standard Series Type SCP-S Intended for the cleaning of hose, tube or pipe without end fittings or restrictions. Coupling Series Type SCP-C Intended for the cleaning of hose assemblies or the removal of loose contamination from pipe, tube or hose. Abrasive Series Type SCP-A Intended for the internal cleaning of metal pipe and tube to remove light contaminants (rust and scale). Grinding Series Type SCP-G Intended for the internal cleaning of metal pipe and tube to remove medium and heavy contamination (rust and scale).
RkJQdWJsaXNoZXIy ODU4NjY4