8 www.stauff.com Hose Type Indentification Symbols 2SNK 2SN 4SP 4SH 2SNK 2SN Wire Braided Hose - 2 Wire Range - Type HOS-2SNK / 2SN High Pressure Compact Hose EN 857 2SC - ISO 11237-1 2SC - SAE 100 R16S Type HOS-2SNK-..-A-STM-MSHA Item No. Designation ID OD Working Pressure Burst Pressure bar Bend Radius mm Weight Kg/m Crimp Dia1 mm DN Dash Inch mm Wire OD mm Cover OD mm bar PSI 6100297373 HOS-2SNK-06-A-STM-MSHA 06 -04 1/4 6.6 11.5 13.4 450 6525 1800 45 0.27 16.3 6100297372 HOS-2SNK-10-A-STM-MSHA 10 -06 3/8 9.9 14.7 16.8 385 5585 1540 65 0.38 20.9 6100297371 HOS-2SNK-12-A-STM-MSHA 12 -08 1/2 13.0 18.4 20.5 350 5075 1400 90 0.52 24.6 6100297370 HOS-2SNK-16-A-STM-MSHA 16 -10 5/8 16.4 21.9 23.7 290 4205 1160 100 0.61 28.5 6100297369 HOS-2SNK-19-A-STM-MSHA 19 -12 3/4 19.5 26.0 27.7 280 4060 1120 120 0.79 31.7 6100297374 HOS-2SNK-25-A-STM-MSHA 25 -16 1 26.0 32.9 35.6 200 2900 800 150 1.15 40.4 6100297367 HOS-2SNK-31-A-STM-MSHA 31 -20 1-1/4 32.5 40.5 43.5 175 2540 700 300 1.57 47.1 Hose Type Indentification Symbol Tube Material Synthetic rubber, resistant against hydraulic fluids (HL, HLP, HLPD, HVLP, HFA, HFAS, HFB, HFC) Reinforcement Two braids of high tensile steel wire Hose Cover Material Abrasion and ozone resistant synthetic rubber MSHA Approved IC-08/24 Working Temperature -40°C to 100°C / -40°F to +212°F (max 120°C / 248°F intermittent) Testing Impulse tested up to 1 million cycles (tested acc. to ISO6803:2017 / DN31 tested up to 200.000 cycles) Technical Features Product Description Compact hose construction for medium to high pressure at reduced bend radii. Suitable for conveying petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water glycol based fluids and air. Tube Material Synthetic rubber, resistant against hydraulic fluids (HL, HLP, HLPD, HVLP, HFA, HFAS, HFB, HFC) Reinforcement Two braids of high tensile steel wire Hose Cover Material Abrasion and ozone resistant synthetic rubber MSHA Approved IC-08/24 Working Temperature -40°C to 100°C / -40°F to +212°F (max 120°C / 248°F intermittent) Technical Features Product Description Medium to high pressure hydraulic lines. Suitable for conveying petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water glycol based fluids and air. Beware when using hoses for air or inert gases, hose cover requires to be pricked to allow gas permeation and venting to the atmosphere. High Pressure Hose EN 853 2SN. SAE 1002AT - ISO 1436-1 2SN/2AT Type HOS-2SN-..-A-STM-MSHA Item No. Designation ID OD Working Pressure Burst Pressure bar Bend Radius mm Weight Kg/m Crimp Dia1 mm DN Dash Inch mm Wire OD mm Cover OD mm bar PSI 6100297366 HOS-2SN-38-A-STM-MSHA 38 -24 1-1/2 38.7 51.1 54.5 90 1305 360 500 2.12 58.9 6100297365 HOS-2SN-51-A-STM-MSHA 51 -32 2 51.1 62.9 66.7 80 1160 320 630 2.79 71.3 Hose Type Indentification Symbol 1 Crimp Diameter is for reference only, more information in Swaging Guide on Page 102. Supply of loose hose in bulk on PVC 20" and 28" reels available on request. Contact STAUFF for more information. 1 Crimp Diameter is for reference only, more information in Swaging Guide on Page 102
RkJQdWJsaXNoZXIy ODU4NjY4