Catalogue 3 - STAUFF Flanges

www.stauff.com/3/en/#25 B 25 SAE Butt-Weld Flange / Counterflange Adaptor Type CAG/CSG-ST § 6000 PSI Series Nominal Size PN 1 Dimensions Ordering Codes ( bar / PSI ) ( mm / in ) DN (in) 10.9 ØC ØD L 13 1/2 420 24 31,8 34 CAG-601-ST-**/**-W1 6090 .94 1.25 1.34 **/** replace with ØB / ØA: 16/12 • 20/15 • 21,3/12,3 19 3/4 420 32 41,3 38 CAG-602-ST-**/**-W1 6090 1.26 1.63 1.50 **/** replace with ØB / ØA: 16/12 • 20/14 • 25/19 • 25/18 • 25/17 • 26,9/15,7 • 28/18 25 1 420 38 47,6 40 CAG-603-ST-**/**-W1 6090 1.50 1.87 1.57 **/** replace with ØB / ØA: 25/19 • 30/24 • 30/22 • 33,7/21 • 33,7/19,5 • 38/30 • 38/28 32 1-1/4 420 44 54 45 CAG-604-ST-**/**-W1 2 6090 1.73 2.13 1.77 **/** replace with ØB / ØA: 25/19 • 30/24 • 38/30 • 38/28 • 38/27 • 42,4/29,8 38 1-1/2 420 51 63,5 50 CAG-605-ST-**/**-W1 6090 2.01 2.50 1.97 **/** replace with ØB / ØA: 38/28 • 45/32 • 48,3/38,3 • 48,3/35,7 • 48,3/34 • 48,3/32,3 • 48,3/30,7 • 50/38 • 51/35 51 2 420 67 79,4 58 CAG-606-ST-**/**-W1 6090 2.64 3.13 2.28 **/** replace with ØB / ØA: 48,3/35,7 • 60,3/47,7 • 60,3/44,3 • 60,3/42,8 • 60,3/40,3 • 60,3/33,5 • 65 /39 64 2-1/2 420 89 108 75 CAG-607-ST-**/**-W1 6090 3.50 4.25 2.95 **/** replace with ØB / ØA: 76,1/60 • 76,1/56 • 89/69 • 89/67 • 89/60,5 76 3 420 114 131,6 80 CAG-608-ST-**/**-W1 6090 4.49 5.18 3.15 **/** replace with ØB / ØA: 89/69 • 89/66,7 • 89/60,5 • 114/92,3 • 114/79,3 6000 PSI High Pressure Series (according to ISO 6162-2:2012) 1 The maximum working pressure PN (bar/PSI) applies only to the flange itself and depends on the bolts used (Grade 10.9). The actual maximum working pressure de- pends on the thickness and the quality of the tube used. 2 According to ISO 6162-2 bolts M12 should be used but because usually bolts M14 are used the description of the complete part must show M14 (e.g. CAG-604-ST-42.4/29.8-M14-W129-K). CAG CSG L ØB ØC ØA ØD Catalogue 3 § Edition 11/2023 SAE Flange / Counterflange Adaptors Materials / Ordering Options / Examples * SAE Flange Adaptor (without O-ring) made of Steel S355J2 or equivalent, blank (oiled) CAG-...-ST-**/**-W1 * SAE Counterflange Adaptor made of Steel S355J2 or equivalent, blank (oiled) CSG-...-ST-**/**-W1 * SAE Flange Adaptor (without O-ring) made of Stainless Steel V4A – 1.4404 (on request) CAG-...-ST-**/**-W5 * Kit with DB including Metric bolts 10.9, spring rings, O-ring made of NBR (Buna-N®) CAG-...-ST-**/**-W129-K * Kit with DB including Metric bolts 10.9, spring rings, O-ring made of FKM (Viton®) CAG-...-ST-**/**-V-W129-K * Kit with DB including UNC bolts (Grade 8), spring rings, O-ring made of NBR (Buna-N®) CAG-...-ST-**/**-U-W129-K * Kit with BM including Metric bolts 10.9, spring rings, O-ring made of NBR (Buna-N®) CAG-...-ST-**/**-BM-W129-K Please always indicate ØB / ØA. Please see Page 89 for separate Bolt Sets and Sealings.