288 www.stauff.com/2/en/#288 R Manual Tube Bender Typ TUB-MA Product Description When used with a commercially available vice, STAUFF manual tube benders, type TUB-MA, enable common hydraulic tubes to be bent manually. They are suitable for steel and stainless steel tubes with diameters of 6, 8, 10, 12, 14, 15, 16, 18 and 22 mm with a defined minimum wall thickness. In addition to the metric version, a model for handling inch-gauge tubes with diameters of between 1/4 and 7/8 inches is also available. The eight bending rollers – six in the imperial version – ensure maximum wear. A scale lasered onto the bending rollers enhances the accuracy of the required bending angle with superior precision. The manual tube bender is supplied with all the necessary components and multilingual instructions for use as a complete kit in a high-quality steel case. Product Features Small bending radii allow for compact assemblies Optimised bending contour, which enables tube bends free of flattening and constriction hard wearing steel bending rolls ideal for versatile site use, possibly for installation work on site Technical Data Dimensions (W x D x H): 640mm x 165mm x 70mm Weight (incl. Case): Metric Version 13,8 kg Imperal Version 12,1 kg Outer Diameter Metric Inch Radius Minimum Wall Thickness 6/8 mm (1/4“/ 5/16“) • • 1,5 mm / .06 in 10 mm (3/8“) 12 mm • 33 mm / 1.30 in 1,5 mm / .06 in 1/2“ • 14 mm • 2,0 mm / .08 in 15 mm • 40 mm / 1.57 in 1,5 mm / .06 in 16 mm (5/8“) • • 18 mm • 1,5 mm / .06.in 3/4“ • 48 mm / 1.89 in 2,0 mm / .08 in 20 mm • 22 mm (7/8“) • • Ordering Codes Manual Tube Bender Set in Steelcase (metric Version) TUB-MA-M622-LV-KIT Manual Tube Bender Set in Steelcase (imperal Version) TUB-MA-I414OD-LV-KIT Spare Parts / Accessories Tube Manipulation Catalogue 2 § Edition 03/2024 Description Ordering Codes Bending Lever TUB-MA-S-Bending-Lever Baseplate TUB-MA-S-Baseplate Guide Roller TUB-MA-S-Guide-Roller-W32 Hold Roll TUB-MA-S-Hold-Roll-W101 Guide Roller Mount TUB-MA-S-Guide-Roller-Mount Bolt TUB-MA-S-Bolt-M12x32 Pivot Pin TUB-MA-S-Pivot-Pin Bending Lever Support TUB-MA-S-Bending-Lever-Support-W32 Bending Roller 6/8 mm TUB-T-BE-M6/8-MIOD-W32 Bending Roller 10 mm TUB-T-BE-M10-MIOD-W32 Bending Roller 12 mm TUB-T-BE-M12-M622-W32 Bending Roller 14/15 mm TUB-T-BE-M14/15-M622-W32 Bending Roller 16 mm TUB-T-BE-M16-MIOD-W32 Bending Roller 18 mm TUB-T-BE-M18-M622-W101 Bending Roller 20 mm TUB-T-BE-M20-M622-W101 Bending Roller 22 mm TUB-T-BE-M22-MIOD-W101 Bending Roller 1/2" TUB-T-BE-08OD-I414OD-W32 Bending Roller 3/4" TUB-T-BE-12OD-I414OD-W101 Parts assignment: www.stauff.com/en/category/025000/025022/025025/025021B
RkJQdWJsaXNoZXIy ODUyNzU=