Catalogue 2 - STAUFF Connect

www.stauff.com/2/en/#287 287 R Catalogue 2 § Edition 03/2024 Tube Manipulation STAUFF Clean Nozzles / Nozzle Sets Universal Nozzle Set (SC-U-SET) The Universal Nozzle is designed with a tapered seat that will allow it to suit for 90% of applications, including Hose, Tube and Pipe, with or without fittings, in hydraulic and pneumatic pipe systems, condenser tubes, boiler tubes and food lines. The Universal Nozzle kit fits all and will accommodate applications with JIC, SAE and BSP end fittings. The set of 10 nozzles consists of the following sizes: 6 mm, 8 mm, 10 mm, 13 mm, 16 mm, 19 mm, 25 mm and 32 mm. Metric Tube Nozzle Set (SC-M-SET) The Metric Tube Nozzle is intended for use specifically with Metric sized tube and is designed to fit over the outside of the tube or pipe being cleaned. The inside diameter of the nozzle is reduced to match the inside diameter of the tube. The nozzles are machined from solid bar stock and designed for superior strength. The set of 18 nozzles consist of the following sizes: 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 15 mm, 16 mm, 18 mm, 20 mm, 22 mm, 25 mm, 28 mm, 30 mm, 35 mm, 38 mm, 42 mm, 50 mm and 60 mm. JIC Nozzle Set (SC-J-SET) The JIC Nozzle is designed specifically for use with JIC and SAE type fittings. The nozzles are machined to accommodate both male and female configuration, ensuring a perfect airtight seal every time. The set of 10 nozzles consist of the following sizes: 6 mm, 8 mm, 10 mm, 13 mm, 16 mm, 19 mm, 25 mm, 32 mm, 38 mm and 50 mm. BSP Nozzle Set (SC-B-SET) The BSP Nozzle is designed specifically for BSP configuration fittings. The nozzles are machined to accommodate both male and female configurations, ensuring a perfect airtight seal every time. The set of 7 nozzles consist of the following sizes: 6 mm, 10 mm, 13 mm, 16 mm, 19 mm, 25 mm and 32 mm. NPT Nozzle Set (SC-N-SET) The NPT Nozzle is designed specifically for NPT configuration fittings. The nozzles are machined to accommodate both male and female configurations, ensuring a perfect airtight seal every time. The set of 7 nozzles consist of the following sizes: 1/4 in, 3/8 in, 1/2 in, 5/8 in, 3/4 in, 1 in and 1 1/4 in. Adaptor Ring for Nozzels (SCN-AR) Required for sizes 6-32 mm / 1/4-1 1/4 in STAUFF Clean Projectiles Coupling Series (SCP-C) Intended for the cleaning of hose assemblies (hose with end fittings, adjustments, etc.) or the removal of loose contamination from pipe, tube or hose. Abrasive Series (SCP-A) Intended for the internal cleaning of metal pipe and tube to remove light contaminants (rust and scale). They are recognised by the shorter abrasive pad fixed to one end of the projectile. Grinding Series (SCP-G) Intended for the internal cleaning of metal pipe and tube to remove medium and heavy contamination (rust and scale) from the internal surface. They are recognised by the longer abrasive pad fixed to one end of the projectile that is coated in Silicon Carbide. Please note: For optimum cleaning, it is recommended that projectiles are used once and then discarded and disposed of in an appropriate way. Safety note: A mesh collection bag should be secured to the pipe, tube or hose exit to avoid possible injury to personnel by the projectile exiting at high velocity. Always wear protective safety glasses, ear protection and a dust mask when operating this system. If required, nozzles can be supplied separately. Contact STAUFF for details. Size Pipe / Tube / Hose ID Ordering Codes (mm) (in) Coupling Series (SCP-C) Abrasive Series (SCP-A) Grinding Series (SCP-G) 07 4,8 3/16 SCP-C-07 SCP-A-07 SCP-G-07 09 6,4 1/4 SCP-C-09 SCP-A-09 SCP-G-09 10 6,4 1/4 SCP-C-10 SCP-A-10 SCP-G-10 12 7,9 5/16 SCP-C-12 SCP-A-12 SCP-G-12 14 9,5 3/8 SCP-C-14 SCP-A-14 SCP-G-14 16 11,1 7/16 SCP-C-16 SCP-A-16 SCP-G-16 18 12,7 1/2 SCP-C-18 SCP-A-18 SCP-G-18 20 14,3 9/16 SCP-C-20 SCP-A-20 SCP-G-20 22 15,9 5/8 SCP-C-22 SCP-A-22 SCP-G-22 26 19,1 3/4 SCP-C-26 SCP-A-26 SCP-G-26 28 20,6 13/16 SCP-C-28 SCP-A-28 SCP-G-28 30 22,2 7/8 SCP-C-30 SCP-A-30 SCP-G-30 33 25,4 1 SCP-C-33 SCP-A-33 SCP-G-33 36 26 / 27 1 1/16 SCP-C-36 SCP-A-36 SCP-G-36 38 28,6 1 1/8 - SCP-A-38 SCP-G-38 40 31,8 1 1/4 SCP-C-40 SCP-A-40 SCP-G-40 45 34,9 1 3/8 SCP-C-45 SCP-A-45 SCP-G-45 50 38,1 1 1/2 SCP-C-50 SCP-A-50 SCP-G-50 55 44,5 1 3/4 SCP-C-55 SCP-A-55 SCP-G-55 60 50,8 2 SCP-C-60 SCP-A-60 SCP-G-60