Catalogue 2 - STAUFF Connect
280 www.stauff.com/2/en/#280 R Catalogue 2 § Edition 04/2022 Tube Manipulation STAUFF Clean Pipe, Tube and Hose Cleaning System Product Description The STAUFF Clean System comprises of a pneumatic launcher and a range of specially designed nozzles and projectiles. The launcher uses standard industrial compressed air pressure between 6 and 8 bar / 87 and 116 PSI to propel a foam projectile through the nozzle and into the pipe, tube or hose bore to have their inside surface cleanedfrom any unwanted contamination. This provides a safe and environmentally friendly tool that requires little formal expertise to operate and apply. The launcher is the part of the system that controls the air supply to propel the projectile from start to finish of the cleaning job. The nozzles are specially designed to affect an airtight seal on any pipe, tube or hose with or without end fittings. Its main purpose is to compress the foam projectile allowing it to enter the internal diameter of the pipe, tube or hose to be cleaned. The projectile is the part of the system that does the cleaning: The foam projectile is sized to be approximately 15 % larger than the internal diameter of the pipe, tube or hose to be cleaned. The compression of the projectile against the internal wall cleans the internal surface and expels any loose contaminants from the end of the pipe, tube or hose. The STAUFF Clean System is available as separate components or in a variety of kit forms comprising various nozzle types, adaptor and launcher, all contained in a heavy duty carrying case. STAUFF Clean Launchers / Launcher Kits Characteristics Pneumatic pistol-grip launcher Light-weight and ergonomic design Easy to operate and apply Connection to air suppy with quick release coupling Suitable for any type of nozzle Delivered separately or in a variety of kit forms including carrying case, adaptor ring and nozzles (if required) Technical Data Air compressor requirement: 6 ... 8 bar / 87 ... 116 PSI Effective air volume: 250 ... 400 l/min / 66 ... 106 US GPM Ordering Codes Launcher only SC-LG Launcher kit (launcher, kit and adaptor) SC-LK Kit (as above) with set of 10 Universal nozzles SC-10UV-K Kit (as above) with set of 18 Metric Tube nozzles SC-18MT-K Kit (as above) with set of 10 JIC nozzles SC-10J-K Kit (as above) with set of 7 BSP nozzles SC-7B-K Kit (as above) with set of 7 NPT nozzles SC-7N-K Contact STAUFF for alternative connection adaptors and couplings.