Catalogue 2 - STAUFF Connect

256 www.stauff.com/2/en/#256 P Catalogue 2 § Edition 03/2024 Assembly Tools / Devices STAUFF Press Combined Cutting Ring Assembly and 37° Tube Flaring Machine with Automatic or Manual Pressure Setting and Control § Type SPR-PRC-MA-D-A The electro-hydraulically operated STAUFF Press Assembly Machine SPR-PRC-MA-D-A allows the assembly of cutting rings in the Light Series (L) as well as in the Heavy Series (S) according to ISO 8434-1 / DIN 2353 on metric tube ends with outer diameters from 4 mm to 42 mm. Exchangeable heads allows the device to be adapted for 37° flaring of metric and imperial tube ends with outer diameters from 4 mm to 42 mm and from 1/4 in to 1 1/2 in respectively according to DIN 3949 or SAE J514 / ISO 8434-2. Short times for tool changes, setup and assembly (even when changing the assembly type from cutting ring assembly to 37° tube flaring) make it possible to carry out series production as well as the assembly of small and medium quantities with a high level of economic efficiency, reproducibility and process reliability with considerable reduction of times and cost of assembly of fittings. The adjustable return stoke of the cylinder helps the operator to further optimise the total cycle times. The machine is designed as a robust table-top device for continuous operation in the workshop. It is used in connection with hardened and wear-resistant assembly ools which are specially designed for the machine-assisted assembly. Product Description Smart programmable control panel with push/turn button and back-lit parameter display Noise-reducing tool tray with durable rubber mat Robust rubber feet providing secure positioning and dampening during operation Tooling head for cutting ring assembly based on pre-defined settings / automatic tool size detection Tooling head for cutting ring assembly based on settings manually defined by the operator Tooling head for 37° tube flaring based on settings manually defined by the operator Connections for the tool head as well as for the external foot control switch USB connection for maintenance and data input by the manufacturer Electrical connection with a phase reversing plug according to IEC 60309 CEE 16A a b c d e f gh i j k m o p n l