12 www.stauff.com STAUFF Tube - Stainless Steel Tube § Metric Type TUM § Stainless Steel - Bright Annealed D WT Size Tube OD Wall Thickness Working Pressure Burst Pressure Weight (mm) (mm) (bar) (bar) (kg/m) D WT 6 x 1 6 1 374 1923 0.13 6 x 1.5 6 1.5 561 3000 0.17 8 x 1 8 1 281 1400 0.18 8 x 1.5 8 1.5 421 2191 0.24 8 x 2 8 2 594 3000 0.30 10 x 1 10 1 238 1098 0.23 10 x 1.5 10 1.5 356 1711 0.32 12 x 1 12 1 198 902 0.28 12 x 1.5 12 1.5 297 1400 0.39 12 x 2 12 2 396 1923 0.50 14 x 2 14 2 339 1622 0.60 15 x 1.5 15 1.5 238 1098 0.51 16 x 1.5 16 1.5 223 1024 0.55 16 x 2 16 2 297 1400 0.70 16 x 2.5 16 2.5 371 1790 0.85 18 x 1.5 18 1.5 198 902 0.62 18 x 2 18 2 264 1231 0.80 20 x 2 20 2 238 1098 0.90 20 x 2.5 20 2.5 297 1400 1.10 22 x 2 22 2 216 990 1.00 25 x 2.5 25 2.5 238 1098 1.41 25 x 3 25 3 285 1339 1.64 28 x 2 28 2 170 765 1.30 30 x 3 30 3 238 1098 2.03 30 x 4 30 4 317 1503 2.61 35 x 2 35 2 136 604 1.65 35 x 3 35 3 204 929 2.50 38 x 3 38 3 188 851 2.98 38 x 5 38 5 313 1481 4.13 42 x 3 42 3 170 765 2.93 Order Codes *TUM*-6x1*-L6*-W5/07*-S02*-BA * Tubing - OD Metric TUM * Outside Tube Diameter - D (in mm) -6 * Wall Thickness - WT (in mm) x1 * Length 6 metre -L6 * Material Stainless Steel -W5/07 * Tube Standard EN 10216-5:2013 -S02 * Tube Finish Bright Annealed -BA Specification – Stainless Steel Tube Bright Annealed Material : Austenitic stainless steel 316/316L Technical standards: ASTM A213AW/A269 Condition: Cold drawn seamless Delivery Condition: plugged or capped Working pressures: calculated for straight lengths at 50° C. Standard length 6000 mm (6 m) sold as lengths Weight unit is kilogram per metre DISCLAIMER: Pressures are calculated for straight tube according to AS4041 for dynamic stress for the carbon steel tube and to AS4041 for static stress for the stainless steel tube and are given as a guide only. Bends may introduce wall thinning with consequent reduction in the allowable pressure. All critical applications should be subject to proving tests. No allowance has been made for corrosion in the calculations. Thin walled tubing will need support sleeves for secure “bite” type and “compression” type fitting assembly. Tube is generally available ex-stock, subject to prior sale. Minimum mill quantities may apply to certain sizes. Item No. Designation 2030001600 TUM-6x1-L6-W5/07-S02-BA 2030001599 TUM-6x1.5-L6-W5/07-S02-BA 2030001602 TUM-8x1-L6-W5/07-S02-BA 2030001601 TUM-8x1.5-L6-W5/07-S02-BA 6100152406 TUM-8x2-L6-W5/07-S02-BA 2030001604 TUM-10x1-L6-W5/07-S02-BA 2030001603 TUM-10x1.5-L6-W5/07-S02-BA 2030001607 TUM-12x1-L6-W5/07-S02-BA 2030001606 TUM-12x1.5-L6-W5/07-S02-BA 2030001608 TUM-12x2-L6-W5/07-S02-BA 6100296202 TUM-14x2-L6-W5/07-S02-BA 2030001609 TUM-15x1.5-L6-W5/07-S02-BA 2030001610 TUM-16x1.5-L6-W5/07-S02-BA 2030001612 TUM-16x2-L6-W5/07-S02-BA 2030001614 TUM-18x1.5-L6-W5/07-S02-BA 2030001615 TUM-18x2-L6-W5/07-S02-BA 6100296203 TUM-20x2-L6-W5/07-S02-BA 2030001616 TUM-20x2.5-L6-W5/07-S02-BA 2030001621 TUM-22x2-L6-W5/07-S02-BA 2030001625 TUM-25x2-L6-W5/07-S02-BA 2030001623 TUM-25x2.5-L6-W5/07-S02-BA 6100296204 TUM-25x3-L6-W5/07-S02-BA 6100296205 TUM-28x2-L6-W5/07-S02-BA 2030001632 TUM-30x4-L6-W5/07-S02-BA 2030001634 TUM-35x2-L6-W5/07-S02-BA 2030001635 TUM-35x3-L6-W5/07-S02-BA 2030001636 TUM-38x3-L6-W5/07-S02-BA 2030001637 TUM-38x4-L6-W5/07-S02-BA 6100297576 TUM-38x5-L6-W5/07-S02-BA 2030001642 TUM-42x3-L6-W5/07-S02-BA Please note: Tubing should be cut according to relevant fitting manufacturer’s assembly instructions. STAUFF do not recommend the use of rotary cutting tools. Please note: Tubing should be cut according to the relevant fitting manufacturer’s assembly instructions. For the cutting of tube, STAUFF recommends the use of a Cold saw or Band saw cutting device.
RkJQdWJsaXNoZXIy ODU4NjY4