i www.stauff.com Catalogue 2.4 STAUFF Tube STAUFF Tube - Steel STAUFF Tube - Stainless Steel
Germany Walter Stauffenberg GmbH & Co. KG Im Ehrenfeld 4 58791 Werdohl Tel.: +49 2392 91 60 Fax: +49 2392 91 61 03 E-Mail: sales@stauff.com www.stauff.com Australia New Zealand STAUFF Corporation Pty Ltd STAUFF Corporation (NZ) Ltd. 24-26 Doyle Avenue Unit D, 103 Harris Road Unanderra NSW 2526 East Tamaki, Auckland 2013 Tel.: +61 2 4271 9000 Tel.: +64 9 912 1530 Fax: +61 2 4271 9099 Fax: +64 9 912 1531 E-Mail: sales@stauff.com.au E-Mail: sales@stauff.co.nz www.stauff.com.au www.stauff.co.nz STAUFF products and services are globally available through wholly-owned subsidiaries and a tight network of authorised distributors and representatives in all major industrial regions of the world. You can find detailed contact information on the back cover of this product catalogue or at www.stauff.com Disclaimer: Unless otherwise stated, all data, figures, diagrams and measurements in this product catalogue are approximate values only. While every effort has been made to ensure the accuracy of these figures, diagrams and measurements they should only be used as general references and you should not rely on them for any technical or critical application. If you require precise measurements please contact us to discuss the individual product you are interested in prior to deciding to purchase it. All customers are fully responsible for verifying the product(s) they purchase are suitable for their intended use or application (including that by third parties) prior to the time of purchase and we do not provide any warranties as to fitness additional to those implied by law. We do not take responsibility for any liability arising from incorrect product selection or application. Publication of this product catalogue voids all offers and deals contained in previous editions.
1 www.stauff.com Index STAUFF Tube - Steel STAUFF Tube - Stainless Steel Introduction 2 - 3 4 - 7 8 - 13
2 www.stauff.com Introduction STAUFF LINE Components With the seven dedicated STAUFF Line product groups § STAUFF Clamps § STAUFF Connect § STAUFF Flanges § STAUFF Hose Connectors § STAUFF Quick Release Couplings § STAUFF Valves § STAUFF Test from own, in-house development and manufacturing, the companies of the STAUFF Group provide a comprehensive range of components for fastening and connecting pipes, tubes and hoses for mobile and industrial hydraulic applications and many other industries. The portfolio is completed by components for shutting-off, regulating, throttling and measuring fluid media. For more than 50 years, the companies of STAUFF Group have been developing, manufacturing and distributing pipework equipment and hydraulic components for mechanical and plant engineering and for service and industrial maintenance. In addition to mobile and industrial hydraulic machinery, typical applications also include commercial and special purpose vehicles, rail transportation and energy technology. Likewise, STAUFF products are used in marine, oil and gas applications and in the process, food and chemical industries. The overall range currently includes about 40000 standard products as well as numerous special and system solutions according to customer’s specifications or based on our in-house development. All STAUFF products undergo relevant testing in accordance with international regulations and are governed by the high standards of the in-house quality management system. Furthermore, many items have received certifications and approvals from various international institutes, organisations and authorities who have independently confirmed the quality and performance of the products. Wholly-owned manufacturing, sales and service facilities in 18 countries and a tight global network of authorised distribution partner ensure high presence and service paired with a maximum of availability. In order to perfectly match each other, STAUFF Line products are designed and offered on a high, uniform level of quality. A large proportion of the range made from steel comes as standard with the premium STAUFF Zinc/Nickel surface coating, which is also optionally available for many of the other components. This coating offers the most reliable surface protection far beyond the previous market standards – even after transport, handling and assembly of the components – and meets all current legal requirements. If desired, Original Equipment Manufacturers can be supported with value-added services, from technical consultation to pre-assembly, assembly and kitting as well as logistics services: § Support with the selection of suitable standard components and ordering options; provision of customised solutions according to customer’s specifications or based on our in-house development – from prototyping to large scale production § Analysis and optimization of existing and design and developments of new systems aimed at increasing the efficiency and performance of machines and equipment and creating value for customers by reducing the total cost § Pre-assembly, assembly and kitting of individual components to customer-specific system modules § Individually coordinated procurement solutions (e.g. web shop and electronic data interchange) and supply models (e.g. from warehousing of customised components to Kanban logistics and just-in-time delivery of pre-fabricated system modules to the assembly lines of the customers) aimed at optimising material flows Quality Management – ISO 9001:2015 Environmental Management – ISO 14001:2015 Safety Management OHSAS – 18001:2007 STAUFF Tube is a local Australian and New Zealand standard market product and aligns with the seven dedicated STAUFF Line product groups.
3 www.stauff.com Introduction STAUFF Tube WALL THICKNESS STAUFF supplies a range of precision hydraulic tubing in both metric and imperial sizes. The materials available are standard cold drawn, normalised, seamless (CDS) carbon steel, galvanised zinc plated, CDS carbon steel, and seamless annealed 316L stainless steel. Steel tube is cleaned, normalised, free of scale, has a passivated zinc plated exterior with an oiled interior and capped ends. Stainless steel tube is cold drawn seamless, heat treated to anneal, and supplied with capped ends. Tube is sold as 6 metre lengths. The following designation structure is for Australian and New Zealand standard marketed range. Contact STAUFF for other options available on request. Order Codes Material Carbon steel galvanised E235 +N, thick layer passivated (ST37-4) W66/01 A4 Stainless steel 1.4401 / 1.4404 AISI 316 / AISI 316L (Mo 2.0% min) W5/07 A4 Stainless steel 1.4435 / 1.4436 AISI 316 / AISI 316L (Mo 2.5%min, Ni 12.5%min) W5/10 Standard EN 10305-4:2016 Steel tubes for precision applications. Seamless cold drawn tubes for hydraulic and pneumatic power systems. (CDS) S01 EN 10216-5:2013 Seamless steel tubes for pressure purposes. Stainless steel tubes S02 Surface Finish Annealed and pickled (for Stainless Steel materials only) AP Bright annealed (for Stainless Steel materials only) BA Model Code Tubing - OD Metric TUM Tubing - OD Imperial TUI Size The sizing is defined in the following format : (outside diameter in mm) x (wall thickness in mm) Metric Example: 10 x 1.5 Imperial Example: 6.35 x 0.91 Length Length 6000 mm (6 m) (standard) L6 Length Random * LR Length Custom - defined in mm * (LC3500 = Length 3.5 metres) LCxxxx * Conditions apply d e f Typical markets and applications ▪ Transport vehicles and equipment ▪ Construction mobile and stationary equipment ▪ Marine shipbuilding and offshore ▪ Heavy industrial plant and equipment ▪ Light industrial plant and equipment ▪ Process and instrumentation a b c OUTSIDE DIAMETER Ordering Codes TUM - 10x1.5 - L6 - W5/07 - S02 - AP a b c d e f
5 www.stauff.com STAUFF Tube - Steel Metric Carbon Steel - Zinc Plated Tube TUM-...-W66/01 6 Imperial Carbon Steel - Zinc Plated Tube TUI-...-W66/01 7
6 www.stauff.com STAUFF Tube - Steel Tube § Metric Type TUM § Carbon Steel - Zinc Plated D WT Size Tube OD Wall Thickness Working Pressure Burst Pressure Weight (mm) (mm) (bar) (bar) (kg/m) D WT 6 x 1 6 1 444 1538 0.12 8 x 1 8 1 333 1120 0.17 8 x 1.5 8 1.5 499 1753 0.24 10 x 1 10 1 282 878 0.22 10 x 1.5 10 1.5 423 1369 0.31 12 x 1.5 12 1.5 352 1120 0.39 12 x 2 12 2 470 1538 0.49 14 x 2 14 2 403 1297 0.59 15 x 1.5 15 1.5 282 878 0.50 16 x 1.5 16 1.5 264 819 0.54 16 x 2 16 2 352 1120 0.69 16 x 2.5 16 2.5 440 1432 0.83 18 x 1.5 18 1.5 235 721 0.61 18 x 2 18 2 313 985 0.79 20 x 2 20 2 282 878 0.89 20 x 2.5 20 2.5 352 1120 1.08 22 x 2 22 2 256 792 0.99 25 x 2 25 2 226 690 1.13 25 x 2.5 25 2.5 282 878 1.39 25 x 3 25 3 338 1071 1.63 28 x 2 28 2 201 612 1.28 30 x 3 30 3 282 878 2.00 30 x 4 30 4 376 1202 2.56 35 x 2.5 35 2.5 201 612 2.00 35 x 3 35 3 242 743 2.37 38 x 4 38 4 297 928 3.35 38 x 5 38 5 371 1185 4.07 42 x 3 42 3 201 612 2.89 Item No. Designation 2030033122 TUM-6x1-L6-W66/01-S01 2030033112 TUM-8x1-L6-W66/01-S01 2030033123 TUM-8x1.5-L6-W66/01-S01 2030033124 TUM-10x1-L6-W66/01-S01 2030033113 TUM-10x1.5-L6-W66/01-S01 2030033114 TUM-12x1.5-L6-W66/01-S01 2030033127 TUM-12x2-L6-W66/01-S01 2030033128 TUM-14x2-L6-W66/01-S01 2030033129 TUM-15x1.5-L6-W66/01-S01 2030033131 TUM-16x1.5-L6-W66/01-S01 2030033132 TUM-16x2-L6-W66/01-S01 2030044183 TUM-16x2.5-L6-W66/01-S01 2030033134 TUM-18x1.5-L6-W66/01-S01 2030033115 TUM-18x2-L6-W66/01-S01 2030033137 TUM-20x2-L6-W66/01-S01 2030033119 TUM-20x2.5-L6-W66/01-S01 2030033140 TUM-22x2-L6-W66/01-S01 2030033142 TUM-25x2-L6-W66/01-S01 2030033141 TUM-25x2.5-L6-W66/01-S01 2030033143 TUM-25x3-L6-W66/01-S01 2030033145 TUM-28x2-L6-W66/01-S01 2030033148 TUM-30x3-L6-W66/01-S01 2030033149 TUM-30x4-L6-W66/01-S01 6100060041 TUM-35x2.5-L6-W66/01-S01 2030033118 TUM-35x3-L6-W66/01-S01 2030033153 TUM-38x4-L6-W66/01-S01 2030043517 TUM-38x5-L6-W66/01-S01 2030033155 TUM-42x3-L6-W66/01-S01 Specification – Steel Tube Zinc Plated Material: E235 Tech. Std.: EN10305-4 Condition: Cold drawn seamless Delivery condition: +N normalised oiled and capped Working pressures calculated for straight lengths @ <120° C Zinc plated FeZn8C Chromium 6 Free DISCLAIMER: Pressures are calculated for straight tube according to AS4041 for dynamic stress for the carbon steel tube and to AS4041 for static stress for the stainless steel tube and are given as a guide only. Bends may introduce wall thinning with consequent reduction in the allowable pressure. All critical applications should be subject to proving tests. No allowance has been made for corrosion in the calculations. Thin walled tubing will need support sleeves for secure “bite” type and “compression” type fitting assembly. Tube is generally available ex-stock, subject to prior sale. Minimum mill quantities may apply to certain sizes. Standard length 6000 mm (6 m) sold as lengths Weight unit is kilogram per metre Order Codes *TUM*-6x1*-L6*-W66/01*-S01 * Tubing - OD Metric TUM * Outside Tube Diameter - D (in mm) -6 * Wall Thickness - WT (in mm) x1 * Length 6 metre -L6 * Material Carbon Steel -W66/01 * Tube Standard EN 10305-4:2016 -S01 Please note: Tubing should be cut according to the relevant fitting manufacturer’s assembly instructions. For the cutting of tube, STAUFF recommends the use of a Cold saw or Band saw cutting device.
7 www.stauff.com STAUFF Tube - Steel Tube § Imperial Type TUI § Carbon Steel - Zinc Plated D WT Specification – Steel Tube Zinc Plated Material: E235 Tech. Std.: EN10305-4 Condition: Cold drawn seamless Delivery condition: +N normalised oiled and capped Working pressures calculated for straight lengths @ <120° C Zinc plated FeZn8C Chromium 6 Free Standard length 6000 mm (6 m) sold as lengths Weight unit is kilogram per metre DISCLAIMER: Pressures are calculated for straight tube according to AS4041 for dynamic stress for the carbon steel tube and to AS4041 for static stress for the stainless steel tube and are given as a guide only. Bends may introduce wall thinning with consequent reduction in the allowable pressure. All critical applications should be subject to proving tests. No allowance has been made for corrosion in the calculations. Thin walled tubing will need support sleeves for secure “bite” type and “compression” type fitting assembly. Tube is generally available ex-stock, subject to prior sale. Minimum mill quantities may apply to certain sizes. Order Codes *TUI*-6.35x0.91*-L6*-W66/01*-S01 * Tubing - OD Imperial TUI * Outside Tube Diameter - D (in mm) -6.35 * Wall Thickness - WT (in mm) x0.91 * Length 6 metre -L6 * Material Carbon Steel -W66/01 * Tube Standard EN 10305-4:2016 -S01 Size Tube OD Wall Thickness Working Pressure Burst Pressure Weight (mm/inches) (mm) (bar) (bar) (kg/m) D WT 6.35 x 0.91 6.35 1/4 0.91 404 1302 0.12 9.53 x 1.22 9.53 3/8 1.22 361 1150 0.25 9.53 x 1.63 9.53 3/8 1.63 482 1583 0.32 12.7 x 1.22 12.7 1/2 1.22 271 841 0.35 12.7 x 1.63 12.7 1/2 1.63 362 1153 0.44 15.88 x 1.22 15.88 5/8 1.22 218 665 0.44 15.88 x 1.63 15.88 5/8 1.63 291 908 0.57 15.88 x 2.03 15.88 5/8 2.03 362 1154 0.69 19.05 x 1.63 19.05 3/4 1.63 241 742 0.70 19.05 x 2.03 19.05 3/4 2.03 300 941 0.85 19.05 x 2.64 19.05 3/4 2.64 391 1255 1.07 25.4 x 1.63 25.4 1 1.63 181 546 0.96 25.4 x 2.03 25.4 1 2.03 225 690 1.17 25.4 x 2.64 25.4 1 2.64 293 916 1.48 25.4 x 3.25 25.4 1 3.25 361 1149 1.78 31.75 x 1.63 31.75 1-1/4 1.63 144 431 1.21 31.75 x 2.03 31.75 1-1/4 2.03 180 543 1.49 31.75 2.64 31.75 1-1/4 2.64 240 740 1.90 31.75 x 3.25 31.75 1-1/4 3.25 288 899 2.28 38.1 x 3.25 38.1 1-1/2 3.25 288 899 2.79 Item No. Designation 2030050250 TUI-6.35x0.91-L6-W66/01-S01 2030050252 TUI-9.53x1.22-L6-W66/01-S01 2030001571 TUI-9.53x1.63-L6-W66/01-S01 2030050254 TUI-12.7x1.22-L6-W66/01-S01 2030050283 TUI-12.7x1.63-L6-W66/01-S01 2030050256 TUI-15.88x1.22-L6-W66/01-S01 2030050258 TUI-15.88x1.63-L6-W66/01-S01 2030050259 TUI-15.88x2.03-L6-W66/01-S01 2030050261 TUI-19.05x1.63-L6-W66/01-S01 2030044325 TUI-19.05x2.03-L6-W66/01-S01 2030050264 TUI-19.05x2.64-L6-W66/01-S01 2030050265 TUI-25.4x1.63-L6-W66/01-S01 2030050266 TUI-25.4x2.03-L6-W66/01-S01 2030050268 TUI-25.4x2.64-L6-W66/01-S01 2030050269 TUI-25.4x3.25-L6-W66/01-S01 2030050270 TUI-31.75x1.63-L6-W66/01-S01 2030050271 TUI-31.75x2.03-L6-W66/01-S01 2030050272 TUI-31.75x2.64-L6-W66/01-S01 2030050273 TUI-31.75x3.25-L6-W66/01-S01 2030050061 TUI-38.1x3.25-L6-W66/01-S01 Please note: Tubing should be cut according to the relevant fitting manufacturer’s assembly instructions. For the cutting of tube, STAUFF recommends the use of a Cold saw or Band saw cutting device.
9 www.stauff.com STAUFF Tube - Stainless Steel Metric Stainless Steel - Bright Annealed Tube TUM-...-W5/07-BA 10 Imperial Stainless Steel - Bright Annealed Tube TUI-...-W5/07-BA 11 Metric Stainless Steel - Annealed & Pickled Tube TUM-...-W5/07-AP 12 Imperial Stainless Steel - Annealed & Pickled Tube TUI-...-W5/07-AP 13
10 www.stauff.com STAUFF Tube - Stainless Steel Tube § Metric Type TUM § Stainless Steel - Annealed & Pickled D WT Specification – Stainless Steel Tube Matt Finish Material : Austenitic stainless steel 316/316L Technical standards: ASTM A213AW/A269 Condition: Cold drawn seamless Delivery Condition: plugged or capped Working pressures: calculated for straight lengths at 50° C. Standard length 6000 mm (6 m) sold as lengths Weight unit is kilogram per metre DISCLAIMER: Pressures are calculated for straight tube according to AS4041 for dynamic stress for the carbon steel tube and to AS4041 for static stress for the stainless steel tube and are given as a guide only. Bends may introduce wall thinning with consequent reduction in the allowable pressure. All critical applications should be subject to proving tests. No allowance has been made for corrosion in the calculations. Thin walled tubing will need support sleeves for secure “bite” type and “compression” type fitting assembly. Tube is generally available ex-stock, subject to prior sale. Minimum mill quantities may apply to certain sizes. Size Tube OD Wall Thickness Working Pressure Burst Pressure Weight (mm) (mm) (bar) (bar) (kg/m) D WT 6 x 1 6 1 374 1923 0.13 8 x 1 8 1 281 1400 0.16 8 x 1.5 8 1.5 421 2191 0.24 8 x 2 8 2 594 3000 0.30 10 x 1 10 1 238 1098 0.23 10 x 1.5 10 1.5 356 1711 0.32 12 x 1 12 1 198 902 0.28 12 x 1.5 12 1.5 297 1400 0.39 12 x 2 12 2 396 1923 0.50 14 x 2 14 2 339 1622 0.60 15 x 1.5 15 1.5 238 1098 0.51 16 x 1.5 16 1.5 223 1024 0.55 16 x 2 16 2 297 1400 0.70 16 x 2.5 16 2.5 371 1790 0.85 18 x 1.5 18 1.5 198 902 0.62 20 x 2 20 2 238 1098 0.90 20 x 2.5 20 2.5 297 1400 1.10 22 x 2 22 2 216 990 1.00 25 x 2.5 25 2.5 238 1098 1.41 25 x 3 25 3 285 1339 1.64 28 x 2 28 2 170 765 1.30 30 x 3 30 3 238 1098 2.03 30 x 4 30 4 317 1503 2.60 35 x 2 35 2 136 604 1.65 35 x 3 35 3 252 825 2.41 38 x 3 38 3 188 851 2.98 38 x 5 38 5 313 1481 4.13 42 x 3 42 3 170 765 2.93 Item No. Designation 6100053776 TUM-6x1-L6-W5/07-S02-AP 2030050201 TUM-8x1-L6-W5/07-S02-AP 2030050202 TUM-8x1.5-L6-W5/07-S02-AP 2030050203 TUM-8x2-L6-W5/07-S02-AP 2030050204 TUM-10x1-L6-W5/07-S02-AP 2030050205 TUM-10x1.5-L6-W5/07-S02-AP 2030050206 TUM-12x1-L6-W5/07-S02-AP 2030050207 TUM-12x1.5-L6-W5/07-S02-AP 2030050208 TUM-12x2-L6-W5/07-S02-AP 2030050210 TUM-14x2-L6-W5/07-S02-AP 2030050211 TUM-15x1.5-L6-W5/07-S02-AP 2030050212 TUM-16x1.5-L6-W5/07-S02-AP 2030050213 TUM-16x2-L6-W5/07-S02-AP 2030050214 TUM-16x2.5-L6-W5/07-S02-AP 2030050215 TUM-18x1.5-L6-W5/07-S02-AP 2030050216 TUM-20x2-L6-W5/07-S02-AP 2030050217 TUM-20x2.5-L6-W5/07-S02-AP 2030050219 TUM-22x2-L6-W5/07-S02-AP 2030050221 TUM-25x2.5-L6-W5/07-S02-AP 2030050222 TUM-25x3-L6-W5/07-S02-AP 2030050223 TUM-28x2-L6-W5/07-S02-AP 2030050225 TUM-30x3-L6-W5/07-S02-AP 2030050226 TUM-30x4-L6-W5/07-S02-AP 6100053745 TUM-35x2-L6-W5/07-S02-AP 6100232279 TUM-35x3-L6-W5/7-S02-AP 6100053744 TUM-38x3-L6-W5/07-S02-AP 2030050234 TUM-38x5-L6-W5/07-S02-AP 2030050236 TUM-42x3-L6-W5/07-S02-AP Order Codes *TUM*-6x1*-L6*-W5/07*-S02*-AP * Tubing - OD Metric TUM * Outside Tube Diameter - D (in mm) -6 * Wall Thickness - WT (in mm) x1 * Length 6 metre -L6 * Material Stainless Steel -W5/07 * Tube Standard EN 10216-5:2013 -S02 * Tube Finish Annealed and Pickled -AP Please note: Tubing should be cut according to the relevant fitting manufacturer’s assembly instructions. For the cutting of tube, STAUFF recommends the use of a Cold saw or Band saw cutting device.
11 www.stauff.com STAUFF Tube - Stainless Steel D WT Tube § Imperial Type TUI § Stainless Steel - Annealed & Pickled Standard length 6000 mm (6 m) sold as lengths Weight unit is kilogram per metre DISCLAIMER: Pressures are calculated for straight tube according to AS4041 for dynamic stress for the carbon steel tube and to AS4041 for static stress for the stainless steel tube and are given as a guide only. Bends may introduce wall thinning with consequent reduction in the allowable pressure. All critical applications should be subject to proving tests. No allowance has been made for corrosion in the calculations. Thin walled tubing will need support sleeves for secure “bite” type and “compression” type fitting assembly. Tube is generally available ex-stock, subject to prior sale. Minimum mill quantities may apply to certain sizes. Specification – Stainless Steel Tube Matt Finish Material : Austenitic stainless steel 316/316L Technical standards: ASTM A213AW/A269 Condition: Cold drawn seamless Delivery Condition: plugged or capped Working pressures: calculated for straight lengths at 50° C. Order Codes *TUI*-6.35x0.89*-L6*-W5/07*-S02*-AP * Tubing - OD Imperial TUI * Outside Tube Diameter - D (in mm) -6.35 * Wall Thickness - WT (in mm) x0.89 * Length 6 metre -L6 * Material Stainless Steel -W5/07 * Tube Standard EN 10216-5:2013 -S02 * Tube Finish Annealed and Pickled -AP Size Tube OD Wall Thickness Working Pressure Burst Pressure Weight (mm/inches) (mm) (bar) (bar) (kg/m) D WT 6.35 x 0.89 6.35 1/4 0.89 333 1588 0.12 6.35 x 1.24 6.35 1/4 1.24 464 2292 0.17 9.53 x 0.89 9.53 3/8 0.89 222 1019 0.19 9.53 x 1.24 9.53 3/8 1.24 309 1463 0.26 9.53 x 1.65 9.53 3/8 1.65 411 2161 0.33 12.7 x 0.89 12.7 1/2 0.89 166 749 0.27 12.7 x 1.24 12.7 1/2 1.24 232 1145 0.36 12.7 x 1.65 12.7 1/2 1.65 309 1461 0.46 15.88 x 1.24 15.88 5/8 1.24 186 841 0.45 15.88 x 1.65 15.88 5/8 1.65 247 1144 0.59 19.05 x 1.24 19.05 3/4 1.24 155 403 0.55 19.05 x 1.65 19.05 3/4 1.65 206 940 0.72 19.05 x 2.11 19.05 3/4 2.11 263 1227 0.90 19.05 x 3.25 19.05 3/4 3.25 405 1973 1.30 25.4 x 1.65 25.4 1 1.65 154 691 0.98 25.4 x 2.11 25.4 1 2.11 225 1037 1.23 31.75 x 1.65 31.75 1-1/4 1.65 122 539 1.39 31.75 x 3.05 31.75 1-1/4 3.05 228 1049 2.17 31.75 x 3.25 31.75 1-1/4 3.25 262 1124 3.54 Item No. Designation 2030050312 TUI-6.35x0.89-L6-W5/07-S02-AP 2030050314 TUI-6.35x1.24-L6-W5/07-S02-AP 2030050318 TUI-9.53x0.89-L6-W5/07-S02-AP 2030050320 TUI-9.53x1.24-L6-W5/07-S02-AP 2030050325 TUI-9.53x1.65-L6-W5/07-S02-AP 2030050327 TUI-12.7x0.89-L6-W5/07-S02-AP 2030050329 TUI-12.7x1.24-L6-W5/07-S02-AP 2030050331 TUI-12.7x1.65-L6-W5/07-S02-AP 2030050335 TUI-15.88x1.24-L6-W5/07-S02-AP 2030050338 TUI-15.88x1.65-L6-W5/07-S02-AP 2030050339 TUI-19.05x1.24-L6-W5/07-S02-AP 2030050341 TUI-19.05x1.65-L6-W5/07-S02-AP 2030050343 TUI-19.05x2.11-L6-W5/07-S02-AP 2030050344 TUI-19.05x3.25-L6-W5/07-S02-AP 2030050346 TUI-25.4x1.65-L6-W5/07-S02-AP 2030050348 TUI-25.4x2.11-L6-W5/07-S02-AP 2030050350 TUI-31.75x1.65-L6-W5/07-S02-AP 2030050351 TUI-31.75x3.05-L6-W5/07-S02-AP 2030050352 TUI-31.75x3.25-L6-W5/07-S02-AP Please note: Tubing should be cut according to the relevant fitting manufacturer’s assembly instructions. For the cutting of tube, STAUFF recommends the use of a Cold saw or Band saw cutting device.
12 www.stauff.com STAUFF Tube - Stainless Steel Tube § Metric Type TUM § Stainless Steel - Bright Annealed D WT Size Tube OD Wall Thickness Working Pressure Burst Pressure Weight (mm) (mm) (bar) (bar) (kg/m) D WT 6 x 1 6 1 374 1923 0.13 6 x 1.5 6 1.5 561 3000 0.17 8 x 1 8 1 281 1400 0.18 8 x 1.5 8 1.5 421 2191 0.24 8 x 2 8 2 594 3000 0.30 10 x 1 10 1 238 1098 0.23 10 x 1.5 10 1.5 356 1711 0.32 12 x 1 12 1 198 902 0.28 12 x 1.5 12 1.5 297 1400 0.39 12 x 2 12 2 396 1923 0.50 14 x 2 14 2 339 1622 0.60 15 x 1.5 15 1.5 238 1098 0.51 16 x 1.5 16 1.5 223 1024 0.55 16 x 2 16 2 297 1400 0.70 16 x 2.5 16 2.5 371 1790 0.85 18 x 1.5 18 1.5 198 902 0.62 18 x 2 18 2 264 1231 0.80 20 x 2 20 2 238 1098 0.90 20 x 2.5 20 2.5 297 1400 1.10 22 x 2 22 2 216 990 1.00 25 x 2.5 25 2.5 238 1098 1.41 25 x 3 25 3 285 1339 1.64 28 x 2 28 2 170 765 1.30 30 x 3 30 3 238 1098 2.03 30 x 4 30 4 317 1503 2.61 35 x 2 35 2 136 604 1.65 35 x 3 35 3 204 929 2.50 38 x 3 38 3 188 851 2.98 38 x 5 38 5 313 1481 4.13 42 x 3 42 3 170 765 2.93 Order Codes *TUM*-6x1*-L6*-W5/07*-S02*-BA * Tubing - OD Metric TUM * Outside Tube Diameter - D (in mm) -6 * Wall Thickness - WT (in mm) x1 * Length 6 metre -L6 * Material Stainless Steel -W5/07 * Tube Standard EN 10216-5:2013 -S02 * Tube Finish Bright Annealed -BA Specification – Stainless Steel Tube Bright Annealed Material : Austenitic stainless steel 316/316L Technical standards: ASTM A213AW/A269 Condition: Cold drawn seamless Delivery Condition: plugged or capped Working pressures: calculated for straight lengths at 50° C. Standard length 6000 mm (6 m) sold as lengths Weight unit is kilogram per metre DISCLAIMER: Pressures are calculated for straight tube according to AS4041 for dynamic stress for the carbon steel tube and to AS4041 for static stress for the stainless steel tube and are given as a guide only. Bends may introduce wall thinning with consequent reduction in the allowable pressure. All critical applications should be subject to proving tests. No allowance has been made for corrosion in the calculations. Thin walled tubing will need support sleeves for secure “bite” type and “compression” type fitting assembly. Tube is generally available ex-stock, subject to prior sale. Minimum mill quantities may apply to certain sizes. Item No. Designation 2030001600 TUM-6x1-L6-W5/07-S02-BA 2030001599 TUM-6x1.5-L6-W5/07-S02-BA 2030001602 TUM-8x1-L6-W5/07-S02-BA 2030001601 TUM-8x1.5-L6-W5/07-S02-BA 6100152406 TUM-8x2-L6-W5/07-S02-BA 2030001604 TUM-10x1-L6-W5/07-S02-BA 2030001603 TUM-10x1.5-L6-W5/07-S02-BA 2030001607 TUM-12x1-L6-W5/07-S02-BA 2030001606 TUM-12x1.5-L6-W5/07-S02-BA 2030001608 TUM-12x2-L6-W5/07-S02-BA 6100296202 TUM-14x2-L6-W5/07-S02-BA 2030001609 TUM-15x1.5-L6-W5/07-S02-BA 2030001610 TUM-16x1.5-L6-W5/07-S02-BA 2030001612 TUM-16x2-L6-W5/07-S02-BA 2030001614 TUM-18x1.5-L6-W5/07-S02-BA 2030001615 TUM-18x2-L6-W5/07-S02-BA 6100296203 TUM-20x2-L6-W5/07-S02-BA 2030001616 TUM-20x2.5-L6-W5/07-S02-BA 2030001621 TUM-22x2-L6-W5/07-S02-BA 2030001625 TUM-25x2-L6-W5/07-S02-BA 2030001623 TUM-25x2.5-L6-W5/07-S02-BA 6100296204 TUM-25x3-L6-W5/07-S02-BA 6100296205 TUM-28x2-L6-W5/07-S02-BA 2030001632 TUM-30x4-L6-W5/07-S02-BA 2030001634 TUM-35x2-L6-W5/07-S02-BA 2030001635 TUM-35x3-L6-W5/07-S02-BA 2030001636 TUM-38x3-L6-W5/07-S02-BA 2030001637 TUM-38x4-L6-W5/07-S02-BA 6100297576 TUM-38x5-L6-W5/07-S02-BA 2030001642 TUM-42x3-L6-W5/07-S02-BA Please note: Tubing should be cut according to relevant fitting manufacturer’s assembly instructions. STAUFF do not recommend the use of rotary cutting tools. Please note: Tubing should be cut according to the relevant fitting manufacturer’s assembly instructions. For the cutting of tube, STAUFF recommends the use of a Cold saw or Band saw cutting device.
13 www.stauff.com STAUFF Tube - Stainless Steel Tube § Imperial Type TUI § Stainless Steel - Bright Annealed D WT Size Tube OD Wall Thickness Working Pressure Burst Pressure Weight (mm/inches) (mm) (bar) (bar) (kg/m) D WT 3.18 x 0.89 3.18 1/8 0.89 664 3376 0.05 4.76 x 0.89 4.76 3/16 0.89 445 1403 0.09 6.35 x 0.89 6.35 1/4 0.89 333 1588 0.12 6.35 x 1.24 6.35 1/4 1.24 464 2292 0.17 6.35 x 1.65 6.35 1/4 1.65 617 3125 0.18 9.53 x 0.89 9.53 3/8 0.89 222 1019 0.19 9.53 x 1.24 9.53 3/8 1.24 309 1463 0.26 9.53 x 1.65 9.53 3/8 1.65 411 2161 0.33 12.7 x 0.89 12.7 1/2 0.89 166 749 0.27 12.7 x 1.24 12.7 1/2 1.24 232 1145 0.36 12.7 x 1.65 12.7 1/2 1.65 309 1461 0.46 12.7 x 2.11 12.7 1/2 2.11 395 1916 0.56 15.88 x 1.24 15.88 5/8 1.24 186 841 0.45 15.88 x 1.65 15.88 5/8 1.65 247 1144 0.59 19.05 x 1.24 19.05 3/4 1.24 155 403 0.55 19.05 x 1.65 19.05 3/4 1.65 206 940 0.72 19.05 x 2.11 19.05 3/4 2.11 263 1227 0.90 25.4 x 1.24 25.4 1 1.24 116 512 0.90 25.4 x 1.65 25.4 1 1.65 154 691 0.98 25.4 x 2.11 25.4 1 2.11 225 1037 1.23 25.4 x 3.25 25.4 1 3.25 304 1436 1.77 31.75 x 3.25 31.75 1 1/4 3.25 262 1124 2.26 Specification – Stainless Steel Tube Bright Annealed Material : Austenitic stainless steel 316/316L Technical standards: ASTM A213AW/A269 Condition: Cold drawn seamless Delivery Condition: plugged or capped Working pressures: calculated for straight lengths at 50° C. Standard length 6000 mm (6 m) sold as lengths Weight unit is kilogram per metre DISCLAIMER: Pressures are calculated for straight tube according to AS4041 for dynamic stress for the carbon steel tube and to AS4041 for static stress for the stainless steel tube and are given as a guide only. Bends may introduce wall thinning with consequent reduction in the allowable pressure. All critical applications should be subject to proving tests. No allowance has been made for corrosion in the calculations. Thin walled tubing will need support sleeves for secure “bite” type and “compression” type fitting assembly. Tube is generally available ex-stock, subject to prior sale. Minimum mill quantities may apply to certain sizes. Item No. Designation 6100279867 TUI-3.18x0.89-L6-W5/07-S02-BA 6100296195 TUI-4.76x0.89-L6-W5/07-S02-BA 6100296196 TUI-6.35x0.89-L6-W5/07-S02-BA 6100296197 TUI-6.35x1.24-L6-W5/07-S02-BA 6100296198 TUI-6.35x1.65-L6-W5/07-S02-BA 6100296199 TUI-9.53x0.89-L6-W5/07-S02-BA 6100296200 TUI-9.53x1.24-L6-W5/07-S02-BA 6100296201 TUI-9.53x1.65-L6-W5/07-S02-BA 6100296181 TUI-12.7x0.89-L6-W5/07-S02-BA 6100296182 TUI-12.7x1.24-L6-W5/07-S02-BA 6100260437 TUI-12.7x1.65-L6-W5/07-S02-BA 6100296183 TUI-12.7x2.11-L6-W5/07-S02-BA 6100296184 TUI-15.88x1.24-L6-W5/07-S02-BA 6100296185 TUI-15.88x1.65-L6-W5/07-S02-BA 6100296188 TUI-19.05x1.24-L6-W5/07-S02-BA 6100296186 TUI-19.05x1.65-L6-W5/07-S02-BA 6100296190 TUI-19.05x2.11-L6-W5/07-S02-BA 6100296191 TUI-25.4x1.24-L6-W5/07-S02-BA 6100296192 TUI-25.4x1.65-L6-W5/07-S02-BA 6100296193 TUI-25.4x2.11-L6-W5/07-S02-BA 6100296194 TUI-25.4x3.25-L6-W5/07-S02-BA 2030001593 TUI-31.75x3.25-L6-W5/07-S02-BA Order Codes *TUI*-6.35x0.89*-L6*-W5/07*-S02*-BA * Tubing - OD Imperial TUI * Outside Tube Diameter - D (in mm) -6.35 * Wall Thickness - WT (in mm) x0.89 * Length 6 metre -L6 * Material Stainless Steel -W5/07 * Tube Standard EN 10216-5:2013 -S02 * Tube Finish Bright Annealed -BA Please note: Tubing should be cut according to the relevant fitting manufacturer’s assembly instructions. For the cutting of tube, STAUFF recommends the use of a Cold saw or Band saw cutting device.
14 www.stauff.com Catalogue 2.4 STAUFF Tube Germany Walter Stauffenberg GmbH & Co. KG Im Ehrenfeld 4 58791 Werdohl Tel.: +49 2392 91 60 Fax: +49 2392 91 61 03 E-Mail: sales@stauff.com STAUFF products and services are globally available through wholly-owned subsidiaries and a tight network of authorised distributors and representatives in all major industrial regions of the world. www.stauff.com Catalogue 2.4 STAUFF Tube § English § 09/2024 STAUFF Tube - Steel STAUFF Tube - Stainless Steel Introduction Adelaide SA Australia E: sant.sales@stauff.com.au Auckland New Zealand E: sales@stauff.co.nz Brisbane QLD Australia E: qld.sales@stauff.com.au Melbourne VIC Australia E: vic.sales@stauff.com.au Sydney NSW Australia E: nsw.sales@stauff.com.au Wollongong NSW Australia E: una.sales@stauff.com.au Australia and New Zealand
RkJQdWJsaXNoZXIy ODU4NjY4