Tube Forming System - STAUFF Form EVO

www.stauff.com STAUFF Connect 14 Additional information and instructions on the operation of the tube forming machine can be found in the detailed operating manual. Gently slide the tube into the machine and push it in until it stops. Use the operating panel to start the actual forming process. Remove and visually check the formed tube end. Quick Start Guide Insert the clamping jaws into the clamping head of the machine and push them completely in until it stops. Insert the tube shaper into the tool holder of the machine and use the bayonet lock to secure it. Close the clamping head, push it into the machine and lock it by turning in clockwise direction. Put the union nut FI-M onto the tube end. Pay attention to the correct alignment. Use the operating panel and the Acknowledge button to start the reference movement. STAUFF Form EVO Tube Forming Machine