52 www.stauff.com/10/en/#52 C Catalogue 10 § Edition 01/2024 Particle and Desiccant Breathers Adaptor Plate Type AP Characteristics Designed to simplify the installation of Desiccant Breathers and enable the use of a visual contamination indicator. With Adaptor Plates AP, desiccant air breathers can be directly mounted to existing connections with a six-hole bolt pattern for flange interfaces similar to DIN 24557, part 2. They are also equipped with a female G1/8 BSP thread (ISO 228) to connect with the Visual Contamination Indicator FM/FME. Adaptor Plates AP are made of Polyamide (PA). A blind plug, O-ring made of NBR (Buna-N®) and 6 socket cap screws (ISO 4762) are supplied with AP as a standard. Contact STAUFF for other Adaptor Plates. Contamination Indicators Type FM/FME Characteristics Designed to indicate the status of Air Breather Elements. Filter Minder Contamination Indicators are connected to the female G1/8 BSP thread (ISO 228) of the Adaptor Plate AP and give a indication of the contamination level of the Air Breather Element. A red marking indicates when the Air Breather Element has to be replaced. Visual Contamination Indicators FM can be reset after each use. Thread T1 Thread T2 Dimensions (mm / in) Socket Cap for use with... Order Code H ØD Screws included G3/4 BSP Female (ISO 228) G1/8 BSP Female (ISO 228) 50 88 M5 x 60 - 8.8 (Steel, zinc-plated) SDB-093/096 SBDL-093/096 SVDB-093/096 AP-1-B12F 1.98 3.46 G1-1/4 BSP Female (ISO 228) G1/8 BSP Female (ISO 228) 70 100 M5 x 80 - 8.8 (Steel, zinc-plated) SDB-121/122 SBDL-121/122 SVDB-121/122 AP-2-B20F 2.76 3.94 Order Codes and Dimensions 6x Ø5,5 (.22) A A Particle and Desiccant Breather SDB with Adaptor Plate AP Thread T Dimensions (mm / in) Order Code L1 L2 G1/8 BSP Male (ISO 228) 75 10 FM 2.54 .39 G1/8 BSP Male (ISO 228) 88 10 FME 3.46 .39 Order Codes und Dimensions Material Housing made of Polycarbonate Technical Data Operating temperature range: -40 °C ... +121 °C (-40 °F ... +250 °F) Accuracy: ±10% (red marking) Standard Calibration: 2 to 8,7 kPA Full Scale (Vacuum): 5,0 kPa (20 IN.) Vacuum First Movement: 1,5 kPa (6 IN.) Technical Data (FME) Electrical Connection (FME): Metri-Pack 150 plug Switching Function Type FME: n/o Switching Voltage: 300 VDC Max. Voltage Breakdown: 450 VDC Max. Switching Current: 1,20 A Max. Carrying Current: 0,50 A Max. Thread T1 ØD Thread T2 30 (1.18) H O-Ring Ø58 x 2,5 (2.300 ID x .103 THK) LK Ø73 (2.87) A–A Red Marking (Change of the Air Breather Element required) Signal Plug Reset Button L1 L2 Thread T SW 14 (Hex .55) Ø 50 (Ø 1.97) Particle and Desiccant Breather SDB with Adaptor Plate AP and Visual Contamination Indicator FM or VisualElectrical Contamination Indicator FME Red Marking (Change of the Air Breather Element required) Reset Button L1 L2 Thread T SW 14 (Hex .55) 64 (2.52) Dimensional drawings: All dimensions in mm (in). Dimensional drawings: All dimensions in mm (in).
RkJQdWJsaXNoZXIy ODUyNzU=