Catalogue 10 - STAUFF Hydraulic Accessories

34 www.stauff.com/10/en/#34 B Metal Filler Breather T ype SMBT-80 (Threaded Version) Characteristics Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Features ƒ Cap diameter of Ø80mm / Ø3.15  in ƒ Threaded version, equipped with male BSP thread (ISO 228) or male NPT thread (ANSI B1.20.1) ƒ Operating temperature range: -30°C ... +120 °C / -22°F ... +248 °F Materials ƒ Breather cap made of Steel, zinc/nickel-plated (Fe/Zn Ni 6) and free of hexavalent chromium CrVI (standard option); chrome-plated and epoxy-coated versions available ƒ Threaded socket made of Steel, zinc-plated ƒ Dipstick adaptor made of Polyamide (PA) Contact STAUFF for alternative materials. Accessories / Options ƒ Pressurisation up to 0,7bar / 10PSI ƒ Air filter element ƒ Dipstick adaptor suitable for plastic dipstick DS-1 (not for connection threads G1/2 and 1/2 NPT) ƒ Plastic dipstick DS-1 with integrated anti-splash feature (not for connection threads G1/2 and 1/2 NPT) ƒ Plastic dipstick with integrated magnet ƒ Oil Demister Please see pages 26 and 53 for details. Maximum Air Flow Rate ƒ 0,45m³/min / 15.89cfm Contact STAUFF for detailed air flow curves. SMBT - 80 - S - 10 - O - B08 - O e Pressurisation Without pressurisation (standard option) 0 Pressurised at 0,35bar / 5 PSI B0.35 Pressurised at 0,7bar / 10PSI B0.7 Please see page 26 for details. f Connection Thread (Male) G1/2 B08 G3/4 B12 G1 B16 1/2NPT N08 3/4NPT N12 1NPT N16 Contact STAUFF for alternative threads. g Dipstick Without dipstick (standard option) 0 With dipstick adaptor suitable for dipstick DS-1 (not for connection threads G1/2 and 1/2 NPT) A With dipstick adaptor and plastic dipstick DS-1 (300mm / 11.81 in) with integrated anti-splash D300 feature (not for connection threads G1/2 and 1/2 NPT) Plastic dipstick (300mm / 11.81 in) with integrated magnet D300M A shorter dipstick length can be achieved by simply cutting down the total length according to individual requirements. Please note: The dipstick adaptor is required for the subsequent installation of plastic dipsticks DS-1 (see page 26 for details), and is included in delivery when ordering a pressurised version. The dipstick adaptor is not available for connection threads G1/2 and 1/2 NPT. Order Codes a Type / Version Metal Filler Breather; Threaded version SMBT b Cap Diameter / Material / Surface Finishing Cap diameter Ø80mm (Ø3.15 in); Breather cap made of Steel, zinc/nickel-plated (standard option) 80 Cap diameter Ø80mm (Ø3.15 in); Breather cap made of Steel, chrome-plated 80C Cap diameter Ø80mm (Ø3.15 in); Breather cap made of Steel, epoxy-coated 80E c Label With STAUFF logo (standard option) S Neutral design without any logo N d Air Filter Element (Material / Micron Rating) Without Breather Function 0 3μm Filter Paper 03 10μm Foam / PUR (standard option) 10 40μm Foam / PUR 40 Contact STAUFF for alternative materials / micron ratings. Dimensions Thread Dimensions (mm / in) H1 H2 Hex Male G1/2 BSP (ISO 228) 14 54 24 .55 2.13 .94 Male G3/4 BSP (ISO 228) 16 54 30 .63 2.13 1.18 Male G1 BSP (ISO 228) 19 54 36 .75 2.13 1.42 Thread Dimensions (mm / in) H1 H2 Hex Male 1/2 NPT (ANSI B1.20.1) 14 52,5 24 .51 2.07 .94 Male 3/4 NPT (ANSI B1.20.1) 16 52,5 30 .59 2.07 1.18 Male G1 NPT (ANSI B1.20.1) 19 52,5 36 .75 2.07 1.42 Dimensional drawings: All dimensions in mm (in). Without Pressurisation Pressurised Hex Ø80 (Ø3.15) Thread H2 H1 Hex Ø80 (Ø3.15) Thread H2 H1 Dipstick Adaptor (optional) Dipstick Adaptor (standard for pressurised version) * Please note: The disptick adaptor is not available for connection threads G1/2 and 1/2 NPT. * * Catalogue 10 § Edition 01/2024 Tank Filler Breathers