Catalogue 10 - STAUFF Hydraulic Accessories

30 www.stauff.com/10/en/#30 B Plastic Filler Breather Mini T ype SPBM (Threaded Version) e Connection Thread (Male) G1/2 BSP B08 f Anti-Splash Feature With anti-splash feature (standard option) A Without anti-splash feature 0 g Dipstick Plastic dipstick (200mm / 7.88 in) with integrated anti-splash feature D200 Plastic dipstick (300mm / 11.81 in) with integrated anti-splash feature D300 Plastic dipstick (300mm / 11.81 in) with integrated magnet D300M Without dipstick - A shorter dipstick length can be achieved by simply cutting down the total length according to individual requirements. Please see page 26 for details. a Type Plastic Filler Breather Mini SPBM b Version Threaded version; Cap diameter Ø30mm (Ø1.18 in) 1 c Logo STAUFF Logo (black cap) S OIL Logo (red cap) 0 Neutral design without any Logo N Contact STAUFF for special Logos / Colors. d Air Filter Element (Material / Micron Rating) Without air filter element 0 10μm Foam / PUR (standard option) 10 Contact STAUFF for alternative materials / micron ratings. Ø30 (Ø1.18) 16,7 (.66) 9,5 (.37) G1/2 Characteristics Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Features ƒ Available with different cap Logos ƒ Threaded version, equipped with male BSP thread (ISO 228) ƒ Operating temperature range: -40°C ... +120 °C / -40°F ... +248 °F Materials ƒ Made of non-corrosive materials ƒ Body and cap made of glass-fibre reinforced Polyamide (PA) ƒ Seals made of NBR (Buna-N®) Contact STAUFF for alternative materials. Accessories / Options ƒ Air filter element ƒ Anti-splash feature ƒ Plastic dipstick with integrated anti-splash feature ƒ Plastic dipstick with integrated magnet Please see page 26 for details. Maximum Air Flow Rate ƒ 0,25m³/min / 8.83cfm Please see below for detailed air flow curves. Installation ƒ Recommended mounting spaces: Ø 48mm / Ø 1.89  in 0 0,10 0,20 0,30 Q in m 3 /min 0,25 0,20 0,15 0,10 0,05 0 p in bar 0 1.77 5.30 8.83 Q in cfm 3.63 0 2.90 0 0 2.18 0 1.45 0 0 .73 0 p in PSI 4.35 0,15 3.53 0,25 7.06 0,05 0,30 10.60 Type SPBM (into the tank) With anti-splash feature and Dipstick With anti-splash feature 0 0,10 0,20 0,30 Q in m 3 /min 0,25 0,20 0,15 0,10 0,05 0 p in bar 0 1.77 5.30 8.83 Q in cfm 3.63 0 2.90 0 0 2.18 0 1.45 0 0 .73 0 p in PSI 4.35 0,15 3.53 0,25 7.06 0,05 0,30 10.60 Type SPBM (out of the tank) With anti-splash feature and Dipstick With anti-splash feature Pressure Drop Flow Curves Dimensional drawings: All dimensions in mm (in). Catalogue 10 § Edition 01/2024 Tank Filler Breathers SPBM - 1 - S - 10 - B08 - A - D200 Order Codes