www.stauff.com/1/en/#99 E 99 Catalogue 1 § Edition 01/2024 STAUFF ACT Clamps: Anti-Corrosion Technology ACT Mounting Hardware Material Properties and Handling Instructions ACT Mounting Hardware is made of Stainless Steel V4A (Material Code: W55) with enhanced corrosion resistance by practically excluding metallic and non-metallic impurities during production, processing and handling. ACT Mounting Hardware is always delivered in hermetically-sealed quality storage bags with 25 pieces each to avoid contamination during transport. Always make sure that ACT Mounting Hardware is stored separately from carbon steel and any other metals, and that appropriate tools are used to assemble the clamps. Details: www.stauff.com/act/assembly Material Code W55 ACT Mounting Hardware Installation with Channel Rail Adaptors Required components: 1ACT Hexagon Head Bolt AS...W55 1 ACT Cover Plate GD...W55 1 ACT Clamp Body (2 Clamp Halves) 1ACT Channel Rail Adaptor CRA...W55 Suitable for various brands and types of channel rails (including Halfen, Hilti, Unistrut® etc.). Channel Rail Adaptor Type CRA ... W55 Suitability Chart for ACT Channel Rail Adaptors in the Twin Series The STAUFF Channel Rail Adaptor, type CRA, is suitable for various brands and types of channel rails (including Halfen, Hilti, Unistrut® etc.). The drawing describes the basic dimensional requirements for channel rails to be used with STAUFF Channel Rail Adaptors, type CRA. In case of doubt, please do not hesitate to contact STAUFF prior to field application. min. 22 (min. .87) max. 28 (max. 1.10) min. 20 (min. .79) 6 ... 7,5 (.24....30) Group Dimensions ( mm / in ) Order Code Packaging Unit STAUFF DIN G L1 L2 L3 B1 B2 H1 H2 H3 (in pieces / bag) 1D 1 M6 21 35 40 16 19 6 5,5 20,5 CRA-1-8/1D-M-W55 25 .83 1.38 1.57 .63 .75 .24 .22 .81 2D 2 M8 21 35 38 53 19 9 5,5 23,5 CRA-2-3D-M-W55 25 3D 3 .83 1.38 1.50 2.09 .75 .35 .22 .93 L G ACT Hexagon Head Bolt Type AS ... W55 (according to DIN 931 / 933) Dimensions applicable only when used with Cover Plate GD and Weld Plate SP ACT Cover Plate Type GD ... W55 Group Dimensions ( mm / in ) Ordering Code Packaging Unit STAUFF DIN Thread G x L (in pieces / bag) 1D 1 M6 x 35 AS-M6x35-W55 25 M6 x 1.38 2D 2 M8 x 35 AS-M8x35-W55 25 M8 x 1.38 3D 3 M8 x 45 AS-M8x45-W55 25 M8 x 1.77 L B øD S H L B øD S H Group Dimensions ( mm / in ) Ordering Code Packaging Unit STAUFF DIN L B H S ØD (in pieces / bag) 1D 1 34 30 7 3 7 GD-1D-W55 25 1.34 1.18 .28 .12 .28 2D 2 52 30 7 3 9 GD-2D-W55 25 2.05 1.18 .28 .12 .35 3D 3 65 30 7 3 9 GD-3D-W55 25 2.56 1.18 .28 .12 .35
RkJQdWJsaXNoZXIy ODUyNzU=