96 www.stauff.com/1/en/#96 E Catalogue 1 § Edition 01/2024 STAUFF ACT Clamps: Anti-Corrosion Technology ACT Mounting Hardware Material Properties and Handling Instructions ACT Mounting Hardware is made of Stainless Steel V4A (Material Code: W55) with enhanced corrosion resistance by practically excluding metallic and non-metallic impurities during production, processing and handling. ACT Mounting Hardware is always delivered in hermetically-sealed quality storage bags with 25 pieces each to avoid contamination during transport. Always make sure that ACT Mounting Hardware is stored separately from carbon steel and any other metals, and that appropriate tools are used to assemble the clamps. Details: www.stauff.com/act/assembly L G ACT Hexagon Head Bolt Type AS ... W55 (according to DIN 931 / 933) Dimensions applicable only when used with Cover Plate GD and Weld Plate SP ACT Cover Plate Type GD ... W55 Material Code W55 ACT Mounting Hardware Installation on Mounting Rails Required components: 1ACT Hexagon Head Bolt AS...W55 1 ACT Cover Plate GD...W55 1 ACT Clamp Body (2 Clamp Halves) 1ACT Hexagon Rail Nuts, SM...W55 1ACT Mounting Rail, TS...W55 Before welding, always make sure that the designated position of the ACT Weld Plate is suitable for the expected loads. Group Dimensions ( mm / in ) Ordering Code Packaging Unit STAUFF DIN Thread G x L (in pieces / bag) 1D 1 M6 x 35 AS-M6x35-W55 25 M6 x 1.38 2D 2 M8 x 35 AS-M8x35-W55 25 M8 x 1.38 3D 3 M8 x 45 AS-M8x45-W55 25 M8 x 1.77 L B øD S H L B øD S H Group Dimensions ( mm / in ) Ordering Code Packaging Unit STAUFF DIN L B H S ØD (in pieces / bag) 1D 1 34 30 7 3 7 GD-1D-W55 25 1.34 1.18 .28 .12 .28 2D 2 52 30 7 3 9 GD-2D-W55 25 2.05 1.18 .28 .12 .35 3D 3 65 30 7 3 9 GD-3D-W55 25 2.56 1.18 .28 .12 .35 Hexagon Rail Nut (for Use with Mounting Rail TS) Type SM Mounting Rail (for Use with Hexagon Rail Nut SM) Type TS Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN Thread G L B H1 H2 ØD (Standard Options) 1D 1 M6 25,5 10,4 14,2 5,5 12 SM-1-8/1D-M-W55 1.00 .41 .56 .22 .47 2D 2 M8 25,5 10,4 13 5 14 SM-2-5D-M-W55 1.00 .41 .51 .20 .55 3D 3 M8 25,5 10,4 13 5 14 SM-2-5D-M-W55 1.00 .41 .51 .20 .55 Ordering Codes (Standard Options) Length of Rail 1m / 3.28ft Height 11mm / .43 in TS-11-1M-W55 Length of Rail 2m / 6.56ft Height 11mm / .43 in TS-11-2M-W55 Length of Rail 1m / 3.28ft Height 14mm / .55 in TS-14-1M-W55 Length of Rail 2m / 6.56ft Height 14mm / .55 in TS-14-2M-W55 Group Dimensions ( mm / in ) STAUFF DIN B1 B2 S 1D 1 28 11 2 2D 2 1.10 .43 .08 3D 3 Mounting Rail TS-11 Mounting Rail TS-14 STAUFF Group 1D STAUFF Group 2D to 5D S B1 11 .43 B2 B1 B2 S 14 .55 L B G H1 H2 ØD L B G H1 H2 ØD
RkJQdWJsaXNoZXIy ODUyNzU=