Catalogue 1 - STAUFF Clamps

www.stauff.com/1/en/#85 E 85 Catalogue 1 § Edition 01/2024 STAUFF ACT Clamps: Anti-Corrosion Technology ACT Mounting Hardware Material Properties and Handling Instructions ACT Mounting Hardware is made of Stainless Steel V4A (Material Code: W55) with enhanced corrosion resistance by practically excluding metallic and non-metallic impurities during production, processing and handling. ACT Mounting Hardware is always delivered in hermetically-sealed quality storage bags with 25 pieces each to avoid contamination during transport. Always make sure that ACT Mounting Hardware is stored separately from carbon steel and any other metals, and that appropriate tools are used to assemble the clamps. Details: www.stauff.com/act/assembly L G ACT Hexagon Head Bolt Type AS ... W55 (according to DIN 931 / 933) Dimensions applicable only when used with Cover Plate DP and Weld Plate SP ACT Cover Plate Type DP ... W55 øD B L2 S H L1 Thread G Material Code W 55 L2 S øD B L1 ACT Mounting Hardware Installation on Single Weld Plates Required components (for use with single weld plate): 2 ACT Hexagon Head Bolts AS...W55 1 ACT Cover Plate DP...W55 1 ACT Clamp Body (2 Clamp Halves) 1 ACT Single Weld Plate SP...W55 Before welding, always make sure that the designated position of the ACT Weld Plate is suitable for the expected loads. ACT Double Weld Plate Type SPD ... W55 Group Dimensions ( mm / in ) Ordering Code Packaging Unit STAUFF DIN G L1 L2 B1 B2 S H ØD (in pieces / bag) 1A 1 M6 36 20 60 30,5 3 6,5 12 SPD-1A-M-W55 25 1.42 0.79 2.36 1.20 .12 .26 .47 2 2 M6 42 26 60 30,5 3 6,5 12 SPD-2-M-W55 25 1.65 1.02 2.36 1.20 .12 .26 .47 3 3 M6 50 33 60 30,5 3 6,5 12 SPD-3-M-W55 25 1.97 1.30 2.36 1.20 .12 .26 .47 øD S H L 2 L 1 B2 B1 Thread G Alternative types of weld plates are available upon request. Please contact STAUFF for further information. Group Dimensions ( mm / in ) Ordering Code Packaging Unit STAUFF DIN Thread G x L (in pieces / bag) 1A 1 M6 x 30 AS-M6x30-W55 25 M6 x 1.18 2 2 M6 x 35 AS-M6x35-W55 25 M6 x 1.38 3 3 M6 x 40 AS-M6x40-W55 25 M6 x 1.57 4 4 M6 x 45 AS-M6x45-W55 25 M6 x 1.77 5 5 M6 x 60 AS-M6x60-W55 25 M6 x 2.36 7M M10 x 110 AS-M10x110-W55 25 M10 x 4.33 8M M10 x 145 AS-M10x145-W55 25 M10 x 5.71 Group Dimensions ( mm / in ) Ordering Code Packaging Unit STAUFF DIN L1 L2 B S ØD (in pieces / bag) 1A 1 34 20 30 3 7 DP-1A-W55 25 1.34 .79 1.18 .12 .28 2 2 40,5 26 30 3 7 DP-2-W55 25 1.59 1.02 1.18 .12 .28 3 3 48 33 30 3 7 DP-3-W55 25 1.89 1.30 1.18 .12 .28 4 4 57 40 30 3 7 DP-4-W55 25 2.24 1.57 1.18 .12 .28 5 5 70 52 30 3 7 DP-5-W55 25 2.76 2.05 1.18 .12 .28 7M 125 100 40 8 11 DP-7M-W55 25 4.92 3.94 1.57 .31 .43 8M 165 140 45 8 11 DP-8M-W55 25 6.50 5.51 1.77 .31 .43 Group Dimensions ( mm / in ) Ordering Code Packaging Unit STAUFF DIN G L1 L2 B S H ØD (in pieces / bag) 1A 1 M6 36 20 30 3 6,5 12 SP-1A-M-W55 25 1.42 0.79 1.18 .12 .26 .47 2 2 M6 42 26 30 3 6,5 12 SP-2-M-W55 25 1.65 1.02 1.18 .12 .26 .47 3 3 M6 50 33 30 3 6,5 12 SP-3-M-W55 25 1.97 1.30 1.18 .12 .26 .47 4 4 M6 60 40 30 3 6,5 12 SP-4-M-W55 25 2.36 1.57 1.18 .12 .26 .47 5 5 M6 71 52 30 3 6,5 12 SP-5-M-W55 25 2.80 2.05 1.18 .12 .26 .47 7M M10 125 100 40 8 5,3 14 SP-7M-M-W55 25 4.92 3.94 1.58 .31 .21 .55 8M M10 165 140 45 8 5,3 14 SP-8M-M-W55 25 6.50 5.51 1.77 .31 .21 .55 ACT Single Weld Plate Type SP ... W55