Catalogue 1 - STAUFF Clamps

www.stauff.com/1/en/#79 D 79 f Material & Surface Finishing Please select the required material & surface finishing of the metal parts and add the corresponding Code to position f of the order code for your clamp assembly. Metal parts made of Carbon Steel, uncoated W1 Metal parts made of Carbon Steel, phosphated W2 Metal parts made of Carbon Steel, zinc/nickel-plated W3 Metal parts made of Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Metal parts made of Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Weld Plate made of Carbon Steel, phosphated; Other metal parts made of Carbon Steel, zinc/nickel-plated W10 Weld Plate and Cover Plate made of Carbon Steel, phosphated; Bolts made of Carbon Steel, uncoated W12 MountingRailNutsmadeofCarbonSteel,zinc/nickel-plated; Cover Plate made of Carbon Steel, phosphated; W13 Bolts made of Carbon Steel, uncoated WeldPlate /CoverPlatemadeofCarbonSteel,phosphated; Bolts made of Carbon Steel, zinc/nickel-plated W15 MountingRailNutsmadeofCarbonSteel,zinc/nickel-plated; Cover Plate made of Carbon Steel, phosphated; W16 Bolts made of Carbon Steel, zinc/nickel-plated Safety Locking Plate made of Carbon Steel, phosphated; Bolts made of Carbon Steel, zinc/nickel-plated W17 Safety Locking Plate made of Carbon Steel, uncoated; Bolts made of Carbon Steel, phosphated W18 Cover Plate made of Carbon Steel, phosphated; Bolts made of Carbon Steel, uncoated W19 Individual combinations of alternative materials and surface finishings are available upon request. Contact STAUFF for further information. b Group Size & Diameters Please select the required group size and diameter and add the corresponding Code to position b of the crder code for your clamp assembly. Group Outside Availability of Clamp Diameter BodyMaterials&Designs P / T / H Profiled STAUFF (mm) Design Type RI Code 4S-D 6 ™ ˜ 4006/06 8 ™ ˜ 4008/08 10 ™ ˜ 4010/10 12 ™ ˜ 4012/12 12,7 ˜ ˜ 4012.7/12.7 14 ™ ˜ 4014/14 15 ™ ˜ 4015/15 16 ™ ˜ 4016/16 17,2 ™ ˜ 4017.2/17.2 18 ™ ˜ 4018/18 19 ˜ ˜ 4019/19 20 ˜ ™ 4020/20 21,3 ˜ ™ 4021.3/21.3 22 ˜ ™ 4022/22 25,4 ˜ ™ 4025.4/25.4 26,9 ˜ ™ 4026.9/26.9 5S-D 20 ™ ˜ 5020/20 21,3 ™ ˜ 5021.3/21.3 22 ™ ˜ 5022/22 25 ™ ˜ 5025/25 26,9 ™ ˜ 5026.9/26.9 28 ™ ˜ 5028/28 30 ™ ˜ 5030/30 32 ˜ ˜ 5032/32 33,7 ˜ ™ 5033.7/33.7 38 ˜ ™ 5038/38 42 ˜ ™ 5042/42 a Type of Installation Please select the type of installation (e.g. Weld Plates, Rail Nuts etc.) and add the corresponding Code to position a of the order code for your clamp assembly. Without Installation Equipment Code: none Installation on Weld Plate Single Weld Plate Code: SPAD Installation on Mounting / Channel Rail Mounting Rail Nut Code: GMV Channel Rail Adaptor Code: CRA c Clamp Body Design & Material Please select the design and material of your clamp body and add the corresponding Code to position c of the order code for your clamp assembly. Please check the availability of the selected clamp body design and material according to the matrix table in b . Profiled Design Polypropylene Code: PP Polyamide Code: PA Type RI (with Elastomer Insert) Polypropylene Code: PP-R Polyamide Code: PA-R Clamp Bodies, Type H (smooth Inside surface without tension clearance) are available upon request. Please contact STAUFF for further information. g Assembling & Kitting If required, please select an additional assembling and kitting option and add the corresponding Code to the last position of the order code for your clamp assembly. Components Supplied Separately Code: none (Standard Option) Components Assembled Code: A (Special Option) Components Packed in Kits Code: K (Special Option) d Mounting & Fitting Combination Please select the mounting and fitting combination (e.g. Bolts, Cover Plates etc.) and add the corresponding Code to position d of the order code for your clamp assembly. Installation with Cover Plate and Bolts Cover Plate DPAD with Hexagon Head Bolt AS Code: DPAD-AS Installation with Locking Plate and Bolts Safety Locking Plate SIPD with Stacking Bolt AF Code: SIPD-AF e Thread Type Please select the required thread type and add the corresponding Code to position e of the order code for your clamp assembly. Metric ISO thread Code: M Unified coarse (UNC) thread Code: U All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. SPAD - 4012.7/12.7 - PP - DPAD-AS - M - W1 - K ˜ Standard Option Catalogue 1 § Edition 01/2024 Heavy Twin Series