62 www.stauff.com/1/en/#62 C Catalogue 1 § Edition 01/2024 Twin Series according to DIN 3015, Part 3 Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN L1 L2 L3 B S H ØD Thread G (Standard Options) 1D 1 196 40 18 30 3 6,5 12 M6 RAP-1D-40-5-M-W1 7.72 1.57 .71 1.18 .12 .26 .47 1/4–20 UNC RAP-1D-40-5-U-W1 2D 2 288 58 28 30 5 6 14 M8 RAP-2D-58-5-M-W1 11.34 2.28 1.10 1.18 .20 .24 .55 5/16–18 UNC RAP-2D-58-5-U-W1 3D 3 358 72 35 30 5 6 14 M8 RAP-3D-72-5-M-W1 14.09 2.83 1.37 1.18 .20 .24 .55 5/16–18 UNC RAP-3D-72-5-U-W1 4D 4 444 90 42 30 5 6 14 M8 RAP-4D-90-5-M-W1 17.48 3.54 1.65 1.18 .20 .24 .55 5/16–18 UNC RAP-4D-90-5-U-W1 5D 5 558 112 55 30 5 6 14 M8 RAP-5D-112-5-M-W1 21.97 4.41 2.16 1.18 .20 .24 .55 5/16–18 UNC RAP-5D-112-5-U-W1 All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Group Weld Plate for 5 Clamp Bodies Type RAP Ordering Codes Weld Plate * RAP- * 1D- * 40- * 5- * M- * W1 * Group Weld Plate RAP * STAUFF Group 1D * Pipe Center Spacing L2 (mm) 40 * Number of Clamps 5 * Thread code Metric ISO thread M Unified coarse (UNC) thread U * Material code Carbon Steel, uncoated W1 Carbon Steel, phosphated W2 Carbon Steel, zinc/nickel-plated W3 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 ø D L2 S H B L2 L3 L1 G H S B
RkJQdWJsaXNoZXIy ODUyNzU=