60 www.stauff.com/1/en/#60 C Clamp Body § Profiled Design Profiled Inside Surface with Tension Clearance Group Outside Diameter Nominal Bore Ordering Codes Dimensions ( mm / in ) STAUFF DIN Pipe / Tube / Hose Copper Tube (2 Clamp Halves) Ø D1 / Ø D2 Pipe ASTM B88 ProfiledDesign TypeH (mm) (in) (in) (in) ( QQ - Q = Material) L1 L2 H Smin. H Width 1D 1 6 106/06- QQ - Q 36 20 27 0,6 26,5 30 6,4 1/4 106.4/06.4- QQ - Q 8 5/16 108/08- QQ - Q 9,5 3/8 1/4 109.5/09.5- QQ - Q 1.42 .79 1.06 .02 1.04 1.18 10 1/8 110/10- QQ - Q 12 112/12- QQ - Q 2D 2 12,7 1/2 3/8 212.7/12.7- QQ - Q 53 29 27 0,7 26 30 13,5 1/4 213.5/13.5- QQ - Q 14 214/14- QQ - Q 15 215/15- QQ - Q 2.09 1.14 1.06 .03 1.02 1.18 16 5/8 1/2 216/16- QQ - Q 17,2 3/8 217.2/17.2- QQ - Q 18 218/18- QQ - Q 3D 3 19 3/4 319/19- QQ - Q 67 36 37 0,7 36,5 30 20 320/20- QQ - Q 21,3 1/2 321.3/21.3- QQ - Q 22 7/8 3/4 322/22- QQ - Q 2.64 1.42 1.46 .03 1.44 1.18 25 325/25- QQ - Q 25,4 1 325.4/25.4- QQ - Q 4D 4 26,9 3/4 426.9/26.9- QQ - Q 80 45 40 0,7 38 30 28 428/28- QQ - Q 3.15 1.77 1.57 .03 1.46 1.18 30 430/30- QQ - Q 5D 5 32 1-1/4 532/32- QQ - Q 106 56 53 0,7 52 30 33,7 1 533.7/33.7- QQ - Q 35 1-1/4 535/35- QQ - Q 38 1-1/2 538/38- QQ - Q 4.17 2.20 2.09 .03 2.04 1.18 40 540/40- QQ - Q 42 1-1/4 542/42- QQ - Q Designs & Standard Materials Polypropylene § Profiled Design Profiled inside surface with tension clearance Colour: Green Material code: PP Polypropylene § Profiled Design Profiled inside surface with tension clearance Colour: Black Material code: PP-BK Polypropylene § Type H Smooth inside surface without tension clearance Colour: Green Material code: PP-H Polypropylene § Type H Smooth inside surface without tension clearance Colour: Black Material code: PP-H-BK Polyamide § Profiled Design Profiled inside surface with tension clearance Colour: Black Material code: PA Polyamide § Type H Smooth inside surface without tension clearance Colour: Black Material code: PA-H See pages 178 / 179 for properties and technical information. Special Materials Please contact STAUFF for further details on fire-proof clamp body materials, tested and approved according to several international fire-protection standards (such as BS 6853, EN 45545-2, UL 94 and many more). Seepages 180 / 181 for material properties and technical information. Product Features Proven, tested and trusted product in various markets Profiled design recommended for the safe installation of rigid pipes and tubes; type H recommended for the safe installation of hoses and cables Available for all commonly used pipe and tube outside diameters Environmental protection due to vibration/noise reducing design Excellent weathering resistance, even under extreme conditions Ordering Codes Clamp Body * 1 * 06/06 * -PP One clamp body is consisting of two clamp halves. * 1st Part of STAUFF Group 1 * Exact outside diameters Ø D1 / Ø D2 (mm) 06/06 * Material code (see below) PP Additional outside diameters and combinations of different outside diameters are available upon request. Please contact STAUFF for further information. Clamp Body § Type H Smooth Inside Surface w/o Tension Clearance L2 øD2 L1 S øD1 H Catalogue 1 § Edition 01/2024 Twin Series according to DIN 3015, Part 3
RkJQdWJsaXNoZXIy ODUyNzU=