www.stauff.com/1/en/#57 B 57 Order Code (Mounting Rail STSV not included.) GMV-3006-PP-DPAL-AS-M-W13 W13 is the standard option for this type of installation. Available up to STAUFF Group 6S (DIN Group 4) only. 2x Hexagon Head Bolt Surface: W1 Thread: Metric 1x Cover Plate for Single Clamps Surface: W2 1x Clamp Body (two halves) STAUFF Group 3S (DIN 1) O.D. 6mm / .24 in Material: Polypropylene Profiled inside surface with tension clearance 2xMounting Rail Nut Surface: W3 Thread: Metric Thread codes All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Metric ISO thread M Unified coarse (UNC) thread U Material codes The below listed material codes describe the materials and surface finishings of metal parts that are most relevant for Heavy Series clamp assemblies. Individual combinations of alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Metal parts made of Carbon Steel, uncoated W1 Metal parts made of Carbon Steel, phosphated W2 Metal parts made of Carbon Steel, zinc/nickel-plated W3 Metal parts made of Stainless Steel V2A: 1.4301 / 1.4305 (AISI 304 / 303) W4 Metal parts made of Stainless Steel V4A: 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Weld Plate made of Carbon Steel, phosphated; Other metal parts made of Carbon Steel, zinc/nickel-plated W10 Weld Plate and Cover Plate made of Carbon Steel, phosphated; Bolts made of Carbon Steel, uncoated W12 Mounting Rails Nut made of Carbon Steel, zinc/nickel-plated; Cover Plate made of Carbon Steel, phosphated; Bolts made of Carbon Steel, uncoated W13 Weld Plate and Cover Plate made of Carbon Steel, phosphated; Bolts made of Carbon Steel, zinc/nickel-plated W15 Mounting Rail Nuts made of Carbon Steel, zinc/nickel-plated; Cover Plate made of Carbon Steel, phosphated; Bolts made of Carbon Steel, zinc/nickel-plated W16 Safety Locking Plate made of Carbon Steel, phosphated; Bolts made of Carbon Steel, zinc/nickel-plated W17 Safety Locking Plate made of Carbon Steel, uncoated; Bolts made of Carbon Steel, phosphated W18 Cover Plate made of Carbon Steel, phosphated; Bolts made of Carbon Steel, uncoated W19 Order Code (Mounting Rail STSV not included.) GMV-3006-PP-IS-M-W13 W13 is the standard option for this type of installation. Available up to STAUFF Group 6S (DIN Group 4) only. 2x Socket Cap Screw Surface: W1 Thread: Metric 1x Clamp Body (two halves) STAUFF Group 3S (DIN 1) O.D. 6mm / .24 in Material: Polypropylene Profiled inside surface with tension clearance 2xMounting Rail Nut Surface: W3 Thread: Metric Order Code 3006-PP-SIP-AF-M-W2 W2 (STAUFF Group 3S to 7S) andW18 (STAUFF Group 8S to 10S) are the standard options for this type of installation. Available up to STAUFF Group 10S (DIN Group 8) only. 2x Stacking Bolt Surface: W2 Thread: Metric 1x Safety Locking Plate Surface: W2 1x Clamp Body (two halves) STAUFF Group 3S (DIN 1) O.D. 6mm / .24 in Material: Polypropylene Profiled inside surface with tension clearance Order Code 3006-PP-DPAL-AS-M-W19 W19 (STAUFF Group 3S to 7S) andW1 (STAUFF Group 8S to 12S) are the standard options for this type of installation. 2x Hexagon Head Bolt Surface: W1 Thread: Metric 1x Cover Plate for Single Clamps Surface: W2 1x Clamp Body (two halves) STAUFF Group 3S (DIN 1) O.D. 6mm / .24 in Material: Polypropylene Profiled inside surface with tension clearance Catalogue 1 § Edition 01/2024 Heavy Series according to DIN 3015, Part 2
RkJQdWJsaXNoZXIy ODUyNzU=