Catalogue 1 - STAUFF Clamps

56 www.stauff.com/1/en/#56 C Hexagon Rail Nut (for Use with Mounting Rail TS) Type SM / SMG Mounting Rail (for Use with Hexagon Rail Nut SM / SMG) Type TS Ordering Codes Hexagon Rail Nut * SM- * 1-8/1D- * M- * W3 * Hexagon Rail Nut Carbon Steel SM Stainless Steel SMG * STAUFF Group 1D (DIN Group 1) 1-8/1D 2D to 5D (DIN Group 2 to 5) 2-5D * Thread code Metric ISO thread M Unified coarse (UNC) thread U * Material code Carbon Steel, zinc/nickel-plated W3 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 The Hexagon Rail Nut, type SM-1-8/1D is also suitable for Standard Series, STAUFF Group 1 to 8. All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN Thread G L B H1 H2 ØD (Standard Options) 1D 1 M6 25,5 10,4 14,2 5,5 12 SM-1-8/1D-M-W3 1/4–20 UNC 1.00 .41 .56 .22 .47 SM-1-8/1D-U-W3 2D 2 M8 25,5 10,4 13 5 14 SM-2-5D-M-W3 3D 3 4D 4 5/16–18 UNC 1.00 .41 .51 .20 .55 SM-2-5D-U-W3 5D 5 Ordering Codes Mounting Rail * TS- * 11- * 1M- * W1 * Mounting Rail TS * Height of rail 11mm / .43 in 11 14mm / .55 in 14 30mm / 1.18 in 30 * Length of rail 1m / 3.28ft 1M 2m / 6.56ft 2M Alternative lengths available upon request. Contact STAUFF for further information. * Material code Carbon Steel, uncoated W1 Carbon Steel, hot-dip galvanised W98 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Ordering Codes (Standard Options) Length of Rail: 1m / 3.28ft Length of Rail: 2m / 6.56ft Height 11mm / .43 in TS-11-1M-W1 Height 11mm / .43 in TS-11-2M-W1 Height 14mm / .55 in TS-14-1M-W1 Height 14mm / .55 in TS-14-2M-W1 Height 30mm / 1.18 in TS-30-1M-W1 Height 30mm / 1.18 in TS-30-2M-W1 Group Dimensions ( mm / in ) STAUFF DIN B1 B2 S 1D 1 28 11 2 2D 2 3D 3 1.10 .43 .08 4D 4 5D 5 Mounting Rail TS-11 Mounting Rail TS-14 Mounting Rail TS-30 STAUFF Group 1D STAUFF Group 2D to 5D Mounting Rails, type TS-11/14/30 are suitable for all Twin Series and Standard Series group sizes. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. STAUFF Group 1D STAUFF Group 2D to 5D ØD L H1 H2 B G Dimensional drawings: All dimensions in mm (in). S B1 11 .43 B2 B1 B2 S 14 .55 S B1 30 1.18 B2 L B G H1 H2 ØD L B G H1 H2 ØD Catalogue 1 § Edition 08/2019 Twin Series according to DIN 3015, Part 3

RkJQdWJsaXNoZXIy ODUyNzU=