Catalogue 1 - STAUFF Clamps

www.stauff.com/1/en/#55 B 55 c Clamp Body Design & Material Please select the design and material of your clamp body and add the corresponding Code to position c of the order code for your clamp assembly. Please check the availability of the selected clamp body design and material according to the matrix table in b . Profiled Design Polypropylene Code: PP Polypropylene (Colour: Black) Code: PP-BK Polyamide Code: PA Thermoplastic Elastomer (87 Shore-A) Code: SA87 (for STAUFF Group 3S to 6S only) Aluminium Code: AL Type H (Smooth) Polypropylene Code: PP-H (for STAUFF Group 3S to 6S only) Polypropylene (Colour: Black; 3S to 6S only) Code: PP-H-BK Polyamide Code: PA-H (for STAUFF Group 3S to 6S only) Thermoplastic Elastomer (87 Shore-A) Code: SA87-H (for STAUFF Group 3S to 6S only) Type RI (with Elastomer Insert) Polypropylene Code: PP-R (for STAUFF Group 4S to 10S only) Polyamide Code: PA-R (for STAUFF Group 4S to 10S only) See pages 178 / 179 for material properties and technical information. Please contact STAUFF for further details on fire-proof clamp body materials, tested and approved according to several international fire-protection standards. d Mounting & Fitting Combination Please select the mounting and fitting combination (e.g. bolts, screws, cover plates etc.) and add the corresponding Code to position d of the order code for your clamp assembly. Installation with Cover Plate and Bolts Cover Plate for Single Clamps DPAL with Hexagon Head Bolts AS Code: DPAL-AS Cover Plate for Double Clamps DPAS with Hexagon Head Bolts AS Code: DPAS-AS Cover Plate for Single Clamps DPAL with Socket Cap Screws IS* Code: DPAL-IS (for STAUFF Group 3S to 6S only) Installation with Locking Plate and Bolts Safety Locking Plate SIP with Stacking Bolts AF Code: SIP-AF Installation with Bolts only Socket Cap Screws IS Code: IS * Special lengths of Socket Cap Screws IS required. For exact lenghts, please see details of Hexagon Head Bolt, type AS (for use with Cover Plates DPAL or DPAS) on page 51. f Material & Surface Finishing Please select the required material & surface finishing of the metal parts and add the corresponding Code to position f of the order code for your clamp assembly. Metal parts made of Carbon Steel, uncoated W1 Metal parts made of Carbon Steel, phosphated W2 Metal parts made of Carbon Steel, zinc/nickel-plated W3 Metal parts made of Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Metal parts made of Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Weld Plate made of Carbon Steel, phosphated; Other metal parts made of Carbon Steel, zinc/nickel-plated W10 Weld Plate and Cover Plate made of Carbon Steel, phosphated; Bolts made of Carbon Steel, uncoated W12 MountingRailNutsmadeofCarbonSteel,zinc/nickel-plated; Cover Plate made of Carbon Steel, phosphated; W13 Bolts made of Carbon Steel, uncoated WeldPlate /CoverPlatemadeofCarbonSteel,phosphated; Bolts made of Carbon Steel, zinc/nickel-plated W15 Mounting Rail Nuts made of Carbon Steel,zinc/nickel-plated; Cover Plate made of Carbon Steel, phosphated; W16 Bolts made of Carbon Steel, zinc/nickel-plated Safety Locking Plate made of Carbon Steel, phosphated; Stacking Bolts made of Carbon Steel, zinc/nickel-plated W17 Safety Locking Plate made of Carbon Steel, uncoated; Stacking Bolts made of Carbon Steel, phosphated W18 Cover Plate made of Carbon Steel, phosphated; Bolts made of Carbon Steel, uncoated W19 Individual combinations of alternative materials and surface finishings are available upon request. Contact STAUFF for further information. g Assembling & Kitting If required, please select an additional assembling and kitting option and add the corresponding Code to the last position of the order code for your clamp assembly. Components supplied separately Code: none (standard option) Components assembled Code: A (special option) Components packed in kits Code: K (special option) e Thread Type Please select the required thread type and add the corresponding Code to position e of the order code for your clamp assembly. Metric ISO thread Code: M Unified coarse (UNC) thread Code: U All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Please see pages 56 and 57 with detailed order examples for some of the most popular Heavy Series clamp assemblies. Catalogue 1 § Edition 01/2024 Heavy Series according to DIN 3015, Part 2