www.stauff.com/1/en/#53 B 53 Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN L1 L2 B1 B2 S (Standard Options) 3S 1 57 13 30 15,2 8 SIP-3S-W2 2.24 .51 1.18 .60 .31 4S 2 70 26 30 15,2 8 SIP-4S-W2 2.76 1.02 1.18 .60 .31 5S 3 85 40 30 15,2 8 SIP-5S-W2 3.35 1.57 1.18 .60 .31 6S 4 116 68 45 17,2 10 SIP-6S-W2 4.57 2.68 1.77 .68 .39 7S 5 153 96 60 22 10 SIP-7S-W2 6.02 3.78 2.36 .87 .39 8S 6 206 130 80 28 15 SIP-8S-W1 8.11 5.12 3.15 1.10 .59 9S 7 251 166 90 31 15 SIP-9S-W1 9.88 6.54 3.54 1.22 .59 10S 8 317 205 120 49 25 SIP-10-S-W1 12.48 8.07 4.72 1.93 .98 Safety Locking Plate (for Use with Stacking Bolt AF) Type SIP Ordering Codes Safety Locking Plate * SIP- * 3S- * W2 * Safety Locking Plate SIP * STAUFF Group 3S * Material code Carbon Steel, uncoated W1 Carbon Steel, phosphated W2 Carbon Steel, zinc/nickel-plated W3 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Ordering Codes Stacking Bolt * AF- * 3S- * M- * W2 * Stacking Bolt AF * STAUFF Group 3S * Thread code Metric ISO thread M Unified coarse (UNC) thread U * Material code Carbon Steel, uncoated W1 Carbon Steel, phosphated W2 Carbon Steel, zinc/nickel-plated W3 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN L1 L2 L3 min. Hex Thread G (Standard Options) 3S 1 49 25 15 15 M10 AF-3S-M-W2 1.93 .98 .59 .59 3/8–16 UNC AF-3S-U-W3* 4S 2 65 40 15 15 M10 AF-4S-M-W2 2.56 1.57 .59 .59 3/8–16 UNC AF-4S-U-W3* 5S 3 77 51 15 15 M10 AF-5S-M-W2 3.03 2.01 .59 .59 3/8–16 UNC AF-5S-U-W3* 6S 4 110 82 18 17 M12 AF-6S-M-W2 4.33 3.23 .71 .67 7/16–14 UNC AF-6S-U-W3* 7S 5 144 110 24 22 M16 AF-7S-M-W2 5.67 4.33 .94 .87 5/8–11 UNC AF-7S-U-W3* 8S 6 200 150 30 27 M20 AF-8S-M-W2 7.87 5.91 1.18 1.06 3/4–10 UNC AF-8S-U-W1* 9S 7 240 180 50 30 M24 AF-9S-M-W2 9.45 7.09 1.97 1.18 7/8–9 UNC AF-9S-U-W1* 10S 8 331 256 62 46 M30 AF-10S-M-W2 13.03 10.08 2.44 1.81 1-1/8–7 UNC AF-10S-U-W1* Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. * Standard finishing option for Heavy Series group sizes 3S to 7S in North America is W3 (Carbon Steel, zinc/nickel-plated). Standard finishing option for Heavy Series group sizes 8S to 10S in North America is W1 (Carbon Steel, uncoated). L2 SW L3 L1 G G L2 S B2 B1 L1 Stacking Bolt (for Use with Safety Locking Plate SIP) Type AF Catalogue 1 § Edition 01/2024 Heavy Series according to DIN 3015, Part 2
RkJQdWJsaXNoZXIy ODUyNzU=