Catalogue 1 - STAUFF Clamps

52 www.stauff.com/1/en/#52 B Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN ØD1 B ØD2 L R S (Standard Options) 3S 1 10,5 10 26 22 4 0,75 SI-10.5-DIN93-W3 .41 .39 1.02 .87 .16 .03 4S 2 10,5 10 26 22 4 0,75 SI-10.5-DIN93-W3 .41 .39 1.02 .87 .16 .03 5S 3 10,5 10 26 22 4 0,75 SI-10.5-DIN93-W3 .41 .39 1.02 .87 .16 .03 6S 4 13 12 30 28 6 1 SI-13-DIN93-W3 .51 .47 1.18 1.10 .24 .04 7S 5 17 15 36 32 6 1 SI-17-DIN93-W3 .67 .59 1.42 1.26 .24 .04 8S 6 21 18 42 36 6 1 SI-21-DIN93-W3 .83 .71 1.65 1.42 .24 .04 9S 7 25 20 50 42 6 1 SI-25-DIN93-W3 .98 .79 1.97 1.65 .24 .04 10S 8 31 26 63 52 10 1,6 SI-31-DIN93-W3 1.22 1.02 2.48 2.05 .39 .06 11S 9 31 26 63 52 10 1,6 SI-31-DIN93-W3 1.22 1.02 2.48 2.05 .39 .06 12S 10 31 26 63 52 10 1,6 SI-31-DIN93-W3 1.22 1.02 2.48 2.05 .39 .06 Safety Washers, type SI are used as locking devices to prevent Hexagon Head Bolts, type AS from loosening. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Ordering Codes Safety Washer * SI- * 10.5- * DIN93- * W3 * Safety Washer SI * Exact inner diameter ØD1 (mm) 10.5 * Type of washer Safety washer with 1 tab (according to DIN 93) DIN 93 * Material code Carbon Steel, zinc/nickel-plated W3 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Radius R ØD1 L ØD2 B S Safety Washer (for Use with Hexagon Head Bolt AS) Type SI (DIN 463) Safety Washers, type SI are used as locking devices to prevent Hexagon Head Bolts, type AS from loosening. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Ordering Codes Safety Washer * SI- * 10.5- * DIN463- * W3 * Safety Washer SI * Exact inner diameter ØD1 (mm) 10.5 * Type of washer Safety washer with 2 tabs (according to DIN 463) DIN 463 * Material code Carbon Steel, zinc/nickel-plated W3 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Radius R ØD1 L1 ØD2 B S L2 Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN ØD1 B ØD2 L1 L2 R S (Standard Options) 3S 1 10,5 10 21 22 13 4 0,75 SI-10.5-DIN463-W3 .41 .39 .83 .87 .51 .16 .03 4S 2 10,5 10 21 22 13 4 1 SI-10.5-DIN463-W3 .41 .39 .83 .87 .51 .16 .04 5S 3 10,5 10 21 22 13 4 1 SI-10.5-DIN463-W3 .41 .39 .83 .87 .51 .16 .04 6S 4 13 12 24 28 15 6 1 SI-13-DIN463-W3 .51 .47 .94 1.10 .59 .24 .04 7S 5 17 15 30 32 18 6 1 SI-17-DIN463-W3 .67 .59 1.18 1.26 .71 .24 .04 8S 6 21 18 37 36 21 6 1 SI-21-DIN463-W3 .83 .71 1.46 1.42 .83 .24 .04 9S 7 25 20 44 42 25 6 1 SI-25-DIN463-W3 .98 .79 1.73 1.65 .98 .24 .04 10S 8 31 26 56 52 32 10 1,6 SI-31-DIN463-W3 1.22 1.02 2.20 2.05 1.26 .39 .06 11S 9 31 26 56 52 32 10 1,6 SI-31-DIN463-W3 1.22 1.02 2.20 2.05 1.26 .39 .06 12S 10 31 26 56 52 32 10 1,6 SI-31-DIN463-W3 1.22 1.02 2.20 2.05 1.26 .39 .06 Safety Washer (for Use with Hexagon Head Bolt AS) Type SI (DIN 93) Safety Washer SI (Bend longer tab down towards the side of the clamp body and one side up towards one of the flats of the hexagon head bolt) Safety Washer SI (Bend longer tab down towards the side of the clamp body and shorter tab up towards one of the flats of the hexagon head bolt) Catalogue 1 § Edition 01/2024 Heavy Series according to DIN 3015, Part 2