Catalogue 1 - STAUFF Clamps

www.stauff.com/1/en/#43 B 43 Catalogue 1 § Edition 01/2024 Heavy Series according to DIN 3015, Part 2 Additional outside diameters are available upon request. Please contact STAUFF for further information. Standard Materials Polypropylene Colour: Black Material code: PP Elastomer Insert Thermoplastic Elastomer (73 Shore-A) Colour: Black Material code: SA73 See pages 178 / 179 for material properties and technical information. Alternative materials are available upon request. Please contact STAUFF for further information. Special Materials Please contact STAUFF for further details on fire-proof clamp body materials, tested and approved according to several international fire-protection standards (such as BS 6853, EN 45545-2, UL 94 and many more). See pages 180 / 181 for material properties and technical information. Noise Reduction Clamp Type NRC L2 L1 H ØD1 Product Features ƒ Designed for the noise and vibration reducing installation of pipes and tubes ƒ Working principle based on a specially shaped, two-part elastomer insert, which mechanically absorbs vibration in the pipe or tube and as a result reduces noises arising to a minimum ƒ Elastomer insert is in particular distinguished by how little of its surface is in contact with the pipe or tube as well as with the clamp body ƒ Light tension of the elastomer insert in mounted condition provides the necessary clamping force ƒ Tongue-groove contour of the elastomer insert and the clamp body (which is reversed and thus diverges from heavy series DIN 3015 clamps with elastomer insert) enables the system to be used for the maximum range of outside diameters per clamp size Group Outside Diameter Ordering Codes ( Q = Material) Dimensions STAUFF DIN Pipe / Tube ClampAssembly Clamp Body NRC Insert ( mm / in ) Ø D1 (Clamp Body + (mm) (in) NRC Insert) (2 Clamp Halves) (2 Insert Halves) L1 L2 H Width Bolts 3S 1 6 3006-PP-NRC 3S-PP-RI-S/NRC RI-NRC-06-3S- Q 55 33 30,5 30,5 M10 8 5/16 3008-PP-NRC RI-NRC-08-3S- Q 10 3010-PP-NRC RI-NRC-10-3S- Q 2.17 1.30 1.20 12 3012-PP-NRC RI-NRC-12-3S- Q 12,7 1/2 3012.7-PP-NRC RI-NRC-12.7-3S- Q 4S 2 14 4014-PP-NRC 4S-PP-RI-S/NRC RI-NRC-14-4S- Q 70 45 48 15 4015-PP-NRC RI-NRC-15-4S- Q 16 5/8 4016-PP-NRC RI-NRC-16-4S- Q 17,2 4017.2-PP-NRC RI-NRC-17.2-4S- Q 18 4018-PP-NRC RI-NRC-18-4S- Q 2.76 1.77 1.89 1.20 19 3/4 4019-PP-NRC RI-NRC-19-4S- Q 20 4020-PP-NRC RI-NRC-20-4S- Q 21,3 4021.3-PP-NRC RI-NRC-21.3-4S- Q 22 7/8 4022-PP-NRC RI-NRC-22-4S- Q 5S 3 25 5025-PP-NRC 5S-PP-RI-S/NRC RI-NRC-25-5S- Q 85 60 58 26,9 5026.9-PP-NRC RI-NRC-26.9-5S- Q 28 5028-PP-NRC RI-NRC-28-5S- Q 30 5030-PP-NRC RI-NRC-30-5S- Q 3.35 2.36 2.28 32 1-1/4 5032-PP-NRC RI-NRC-32-5S- Q 38 1-1/2 5038-PP-NRC RI-NRC-38-5S- Q 6S 4 33,7 6033.7-PP-NRC 6S-PP-RI-S/NRC RI-NRC-33.7-6S- Q 115 90 85 45 M12 35 6035-PP-NRC RI-NRC-35-6S- Q 38 1-1/2 6038-PP-NRC RI-NRC-38-6S- Q 38,7 6038.7-PP-NRC RI-NRC-38.7-6S- Q 40 6040-PP-NRC RI-NRC-40-6S- Q 42 6042-PP-NRC RI-NRC-42-6S- Q 4.53 3.54 3.35 1.77 45,5 6045.5-PP-NRC RI-NRC-45.5-6S- Q 48 6048-PP-NRC RI-NRC-48-6S- Q 51 6051-PP-NRC RI-NRC-51-6S- Q 53,4 6053.4-PP-NRC RI-NRC-53.4-6S- Q 57 6057-PP-NRC RI-NRC-57-6S- Q 7S 5 60 6060-PP-NRC 7S-PP-RI-S/NRC RI-NRC-60-7S- Q 154 122 116 60 M16 63,5 6063.5-PP-NRC RI-NRC-63,5-7S- Q 65 6065-PP-NRC RI-NRC-65-7S- Q 6.06 4.80 4.57 2.36 70 2-3/4 6070-PP-NRC RI-NRC-70-7S- Q 8S 6 72 6072-PP-NRC 8S-PP-RI-S/NRC RI-NRC-72-8S- Q 206 168 164 80 M20 76 6076-PP-NRC RI-NRC-76-8S- Q 80 6080-PP-NRC RI-NRC-80-8S- Q 8.11 6.61 6.46 3.15 88,9 3-1/2 6088.9-PP-NRC RI-NRC-88.9-8S- Q Ordering Codes Clamp Assembly * 3 * 006- * PP- * NRC One assembly is consisting of one clamp body and one insert. * STAUFF Group 3 * Exact outside diameter Ø D1 (mm) 006 * Material code (siehe unten) PP * Insert NRC NRC Clamp Body * 3S- * PP- * RI-S/NRC One NRC clamp body is consisting of two clamp halves. * STAUFF Group 3 * Material code (see below) PP * Clamp Design RI-S/NRC NRC Elastomer Insert * RI-NRC- * 06- * 3S- * SA73 One NRC elastomer insert is consisting of two insert halves. * NRC Elastomer Insert RI-NRC * Exact outside diameter ØD1 (mm) 06 * STAUFF Group 3S * Material code (siehe unten) SA73 Elastomer Inserts for multi-spiral hydraulic hoses (on request) ƒ Designed for the noise and vibration reducing installation of multi-spiral hydraulic hoses ƒ Multi-spiral hydraulic hoses retains a certain defined “freedom of movement” in the radial direction, so that tolerance can be compensated and the outer diameter of the hose can change to the necessary extent due to the pressure pulsation ƒ Elastomer insert has been adapted to hydraulic hoses in terms of its contour (much larger outlet radii and longitudinal ribs) and elasticity ƒ Longitudinal ribs in the elastomer insert allow the compensation of changes in the diameter of the hose while at the same time ensuring gentle yet stable fixation

RkJQdWJsaXNoZXIy ODUyNzU=