Catalogue 1 - STAUFF Clamps

A www.stauff.com/1/en/#35 35 Order Code 212.7-PP-DP-AS-M-W3 W3 is the standard option for this type of installation. Order Code 212.7-PP-IS-M-W3 W3 is the standard option for this type of installation. Order Code 212.7-PP-LI-M-W3 W3 is the standard option for this type of installation. Thread codes All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Metric ISO thread M Unified coarse (UNC) thread U Material codes The below listed material codes describe the materials and surface finishings of metal parts that are most relevant for Standard Series clamp assemblies. Individual combinations of alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Metal parts made of Carbon Steel, zinc/nickel-plated W3 Metal parts made of Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Metal parts made of Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Weld Plate made of Carbon Steel, phosphated; Other metal parts made of Carbon Steel, zinc/nickel-plated W10 Technical Notes * Because of their design, STAUFF Group 1 (DIN Group 0) clamp assemblies only include one single bolt / screw. Order Code 212.7-PP-SIG-AF-M-W3 W3 is the standard option for this type of installation. Order Code * SP-106-PP-IS-M-W10 W10 is the standard option for this type of installation. Order Code SP-212.7-PP-EP-AS-M-W10 W10 is the standard option for this type of installation. Order Code SPV-212.7-PP-EP-AS-M-W10 W10 is the standard option for this type of installation. Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1 2x Hexagon Head Bolt Surface: W3 Thread: Metric 1x Cover Plate Surface: W3 1x Clamp Body (two halves) STAUFF Group 2 (DIN 2) O.D. 12,7mm / .50 in Material: Polypropylene Profiled inside surface with tension clearance 2x Socket Cap Screw with Washer Surface: W3 Thread: Metric 1x Clamp Body (two halves) STAUFF Group 2 (DIN 2) O.D. 12,7mm / .50 in Material: Polypropylene Profiled inside surface with tension clearance 2x Slotted Head Screw with Washer Surface: W3 Thread: Metric 1x Clamp Body (two halves) STAUFF Group 2 (DIN 2) Tube-O.D. 12,7mm / .50 in Material: Polypropylene Profiled inside surface with tension clearance 2x Stacking Bolt Surface: W3 Thread: Metric 1x Safety Locking Plate Surface: W3 1x Clamp Body (two halves) STAUFF Group 2 (DIN 2) O.D. 12,7mm / .50 in Material: Polypropylene Profiled inside surface with tension clearance 1x Socket Cap Screw with Washer Surface: W3 Thread: Metric 1x Clamp Body (two halves) STAUFF Group 1 (DIN 0) O.D. 6mm / .24 in Material: Polypropylene Profiled inside surface with tension clearance Thread: Metric 1x Single Weld Plate Surface: W2 Thread: Metric 2x Hexagon Head Bolt Surface: W3 Thread: Metric 2x Insert Material: Plastic 1x Clamp Body (two halves) STAUFF Group 2 (DIN 2) O.D. 12,7mm / .50 in Material: Polypropylene Profiled inside surface with tension clearance 1x Single Weld Plate Surface: W2 Thread: Metric 2x Hexagon Head Bolt Surface: W3 Thread: Metric 2x Insert Material: Plastic 1x Clamp Body (two halves) STAUFF Group 2 (DIN 2) O.D. 12,7mm / .50 in Material: Polypropylene Profiled inside surface with tension clearance 1x Elongated Weld Plate Surface: W2 Thread: Metric