A www.stauff.com/1/en/#31 31 Safety Locking Plate (for Use with Stacking Bolt AF) Type SIG Ordering Codes Safety Locking Plate * SIG- * 1- * W3 * Safety Locking Plate SIG * STAUFF Group 1 * Material code Carbon Steel, zinc/nickel-plated W3 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Ordering Codes Stacking Bolt * AF- * 1/1A/1D- * M- * W3 * Type of bolt Stacking Bolt (according to STAUFF Standard) AF * STAUFF Group 1 * Thread code Metric ISO thread M Unified coarse (UNC) thread U * Material code Carbon Steel, zinc/nickel-plated W3 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Stacking Bolt (for Use with Safety Locking Plate SIG) Type AF B2 B1 S L STAUFF Group 1 S B2 B1 L STAUFF Group 1A to 8 (7M / 8M) L2 SW L3 L1 G G Thread G Hex Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1 Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN L B1 B2 S (Standard Options) 1 0 16 32 11,2 1 SIG-1-W3 .63 1.26 .44 .04 1A 1 33 28 11,2 1 SIG-1A-W3 1.30 1.10 .44 .04 2 2 39 28 11,2 1 SIG-2-W3 1.54 1.10 .44 .04 3 3 47 28 11,2 1 SIG-3-W3 1.85 1.10 .44 .04 4 4 56 28 11,2 1 SIG-4-W3 2.20 1.10 .44 .04 5 5 69 28 11,2 1 SIG-5-W3 2.72 1.10 .44 .04 6 6 85 28 11,2 1 SIG-6-W3 3.35 1.10 .44 .04 7 7 117 28 11,2 1 SIG-7-W3 4.61 1.10 .44 .04 8 8 143 28 11,2 1 SIG-8-W3 5.63 1.10 .44 .04 7M 125 40 15,2 5 SIG-7M-W3 4.92 1.57 .60 .20 8M 160 45 15,2 5 SIG-8M-W3 6.30 1.77 .60 .20 Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN Thread G L1 L2 L3 min. Hex (Standard Options) 1 0 M6 34 20 12 11 AF-1/1A/1D-M-W3 1/4–20 UNC 1.34 .79 .47 .43 AF-1/1A/1D-U-W3 1A 1 M6 34 20 12 11 AF-1/1A/1D-M-W3 1/4–20 UNC 1.34 .79 .47 .43 AF-1/1A/1D-U-W3 2 2 M6 40 25 12 11 AF-2-M-W3 1/4–20 UNC 1.57 .98 .47 .43 AF-2-U-W3 3 3 M6 44 30 12 11 AF-3-M-W3 1/4–20 UNC 1.73 1.18 .47 .43 AF-3-U-W3 4 4 M6 49 35 12 11 AF-4-M-W3 1/4–20 UNC 1.93 1.38 .47 .43 AF-4-U-W3 5 5 M6 64 50 12 11 AF-5-M-W3 1/4–20 UNC 2.52 1.97 .47 .43 AF-5-U-W3 6 6 M6 74 60 12 11 AF-6-M-W3 1/4–20 UNC 2.91 2.36 .47 .43 AF-6-U-W3 7 7 M6 99 85 12 11 AF-7-M-W3 1/4–20 UNC 3.90 3.35 .47 .43 AF-7-U-W3 8 8 M6 124 110 12 11 AF-8-M-W3 1/4–20 UNC 4.88 4.33 .47 .43 AF-8-U-W3 7M M10 115 90 15 15 AF-7M-M-W3 3/8-16 UNC 4.53 3.54 .59 .59 AF-7M-U-W3 8M M10 150 125 15 15 AF-8M-M-W3 3/8-16 UNC 5.91 4.92 .59 .59 AF-8M-U-W3
RkJQdWJsaXNoZXIy ODUyNzU=