Catalogue 1 - STAUFF Clamps

A www.stauff.com/1/en/#23 23 Multi-Group Weld Plate for Clamp Body Sizes 2 and 5 (Type MGR) Type RAP-MGR Cover a diamater range from 8mm (.31 in) to 42mm (1.65 in) with only one Group Weld Plate! All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Ordering Codes Weld Plate * RAP-MGR- * 25- * 156- * M- * W1 * Multi Group Weld Plate RAP-MGR * Suitable for STAUFF Group 2 and 5 (only type MGR) 25 * Length L4 (mm) 156 (with 6 weld nuts) 156 234 (with 9 weld nuts) 234 312 (with 12 weld nuts) 312 390 (with 15 weld nuts) 390 520 (with 20 weld nuts) 520 700 (with 27 weld nuts) 700 * Thread code Metric ISO thread M Unified coarse (UNC) thread U * Material code Carbon Steel, uncoated W1 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Number of Dimensions ( mm / in ) Ordering Codes Weld Nuts Thread G L3 L4 B S H ØD (Standard Options) 6 M6 26 156 30 4 6,5 12 RAP-MGR-25-156-M-W1 1/4–20 UNC 1.02 6.14 1.18 .16 .26 .47 RAP-MGR-25-156-U-W1 9 M6 26 234 30 4 6,5 12 RAP-MGR-25-234-M-W1 1/4–20 UNC 1.02 9.21 1.18 .16 .26 .47 RAP-MGR-25-234-U-W1 12 M6 26 312 30 4 6,5 12 RAP-MGR-25-312-M-W1 1/4–20 UNC 1.02 12.28 1.18 .16 .26 .47 RAP-MGR-25-312-U-W1 15 M6 26 390 30 4 6,5 12 RAP-MGR-25-390-M-W1 1/4–20 UNC 1.02 15.35 1.18 .16 .26 .47 RAP-MGR-25-390-U-W1 20 M6 26 520 30 4 6,5 12 RAP-MGR-25-520-M-W1 1/4–20 UNC 1.02 20.47 1.18 .16 .26 .47 RAP-MGR-25-520-U-W1 27 M6 26 700 30 4 6,5 12 RAP-MGR-25-700-M-W1 1/4–20 UNC 1.02 27.55 1.18 .16 .26 .47 RAP-MGR-25-700-U-W1 L3 L3 L3 L3 L3 L4 B S H ØD Thread G Clamp Body for Multi-Group Weld Plate Type MGR Additional outside diameters are available upon request. Please contact STAUFF for further information. Ordering Codes Clamp Body * 5 * 20- * PP-MGR One clamp body is consisting of two clamp halves. * STAUFF Group 5 * Exact outside diameter Ø D1 (mm) 20 * Material code (see below) PP-MGR Standard Materials Polypropylene Colour: Green Material code: PP-MGR Polyamide Colour: Black Material code: PA-MGR See pages 178 / 179 for properties and technical information. Group Outside Diameter Nominal Bore Ordering Codes Dimensions Pipe / Tube Copper Tube (2 Clamp ( mm / in ) Ø D Pipe ASTM B88 Halves) STAUFF DIN (mm) (in) (in) (in) ( QQ = Material) L1 L2 L3 H S min. Width 5 5 20 520- QQ -MGR 71 52 26 58 0,8 30 21,3 1/2 521.3- QQ -MGR 22 3/4 522- QQ -MGR 23 523- QQ -MGR 25 525- QQ -MGR 26,9 3/4 526.9- QQ -MGR 28 528- QQ -MGR 30 530- QQ -MGR 2.80 2.05 1.02 2.28 .03 1.18 32 1-1/4 532- QQ -MGR 33,7 1 533.7- QQ -MGR 35 1-1/4 535- QQ -MGR 38 1-1/2 538- QQ -MGR 40 540- QQ -MGR 42 1-1/4 542- QQ -MGR STAUFF Group 5 L2 L1 L3 L3 Ø D H S Multi-Group Weld Plates (type RAP-MGR) are designed to be used in combination with Standard Series clamp bodies, STAUFF Group 2 (regular types, see pages 14 ff.) covering a diamater range from 8mm / .31 in to 18mm / .71 in, as well as Standard Series clamp bodies, STAUFF Group 5 (type MGR, see above) covering a diamater range from 20mm / .79 in to 42mm / 1.65 in. Thus, all Standard Series metal parts (bolts, cover plates) of these groups can be used. Multi-Group Weld Plate RAP-MGR-25-312-M-W1 Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1