Catalogue 1 - STAUFF Clamps

A www.stauff.com/1/en/#21 21 B L2 S H øD 23,5 .93 L1 L3 Twin Weld Plate for 2 Clamp Bodies Type DSP Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN Thread G L1 L2 L3 B S H ØD (Standard Options) 1 0 M6 87 40 40 30 3 6.5 12 DSP-1-40-M-W2 1/4–20 UNC 3.43 1.57 1.57 1.18 .12 .26 .47 DSP-1-40-U-W2 1A 1 M6 77 20 37 30 3 6.5 12 DSP-1A-37-M-W2 1/4–20 UNC 3.03 .79 1.46 1.18 .12 .26 .47 DSP-1A-37-U-W2 2 2 M6 86 26 44 30 3 6.5 12 DSP-2-44-M-W2 1/4–20 UNC 3.39 1.02 1.73 1.18 .12 .26 .47 DSP-2-44-U-W2 3 3 M6 102 33 52 30 3 6.5 12 DSP-3-52-M-W2 1/4–20 UNC 4.02 1.30 2.05 1.18 .12 .26 .47 DSP-3-52-U-W2 4 4 M6 120 40 60 30 3 6.5 12 DSP-4-60-M-W2 1/4–20 UNC 4.72 1.57 2.36 1.18 .12 .26 .47 DSP-4-60-U-W2 5 5 M6 145 52 75 30 3 6.5 12 DSP-5-75-M-W2 1/4–20 UNC 5.71 2.05 2.95 1.18 .12 .26 .47 DSP-5-75-U-W2 6 6 M6 178 66 90 30 3 6.5 12 DSP-6-90-M-W2 1/4–20 UNC 7.01 2.60 3.54 1.18 .12 .26 .47 DSP-6-90-U-W2 All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Ordering Codes Weld Plate * DSP- * 1- * 40- * M- * W2 * Twin Weld Plate for 2 Clamp Bodies DSP * STAUFF Group 1 * Pipe center spacing L3 (mm) 40 * Thread code Metric ISO thread M Unified coarse (UNC) thread U * Material code Carbon Steel, phosphated W2 Carbon Steel, zinc/nickel-plated W3 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Group Weld Plate for 5 or 10 Clamp Bodies Type RAP Group Dimensions ( mm / in ) Ordering Codes STAUFF DIN Thread G L1 L2 L3 B S H ØD (Standard Options) 1 0 M6 314 31 31 30 4 6,5 12 RAP-1-31-10-M-W1 1/4–20 UNC 12.36 1.22 1.22 1.18 .16 .26 .47 RAP-1-31-10-U-W1 1A 1 M6 373 20 37 30 4 6,5 12 RAP-1A-37-10-M-W1 1/4–20 UNC 14.69 .79 1.46 1.18 .16 .26 .47 RAP-1A-37-10-U-W1 2 2 M6 442 26 44 30 4 6,5 12 RAP-2-44-10-M-W1 1/4–20 UNC 17.40 1.02 1.73 1.18 .16 .26 .47 RAP-2-44-10-U-W1 3 3 M6 521 33 52 30 4 6,5 12 RAP-3-52-10-M-W1 1/4–20 UNC 20.51 1.30 2.05 1.18 .16 .26 .47 RAP-3-52-10-U-W1 4 4 M6 300 40 60 30 4 6,5 12 RAP-4-60-5-M-W1 1/4–20 UNC 11.81 1.57 2.36 1.18 .16 .26 .47 RAP-4-60-5-U-W1 5 5 M6 378 52 75 30 4 6,5 12 RAP-5-75-5-M-W1 1/4–20 UNC 14.88 2.05 2.95 1.18 .16 .26 .47 RAP-5-75-5-U-W1 6 6 M6 450 66 90 30 4 6,5 12 RAP-6-90-5-M-W1 1/4–20 UNC 17.72 2.60 3.54 1.18 .16 .26 .47 RAP-6-90-5-U-W1 All threaded parts are available with Metric ISO thread or unified coarse (UNC) thread according to dimension table. Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Ordering Codes Weld Plate * RAP- * 1- * 31- * 10- * M- * W1 * Group Weld Plate for 5 or 10 Clamp Bodies RAP * STAUFF Group 1 * Pipe center spacing L3 (mm) 31 * Number of clamps 10 * Thread code Metric ISO thread M Unified coarse (UNC) thread U * Material code Carbon Steel, phosphated W2 Carbon Steel, zinc/nickel-plated W3 Stainless Steel V2A 1.4301 / 1.4305 (AISI 304 / 303) W4 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 B L2 S H øD L3 L1 L2 STAUFF Group 1 STAUFF Group 1A to 8 B L2 S H øD L3 L1 STAUFF Group 1 STAUFF Group 1A to 8 Thread G Thread G Thread G Thread G Dimensional drawings: All dimensions in mm (in). Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1