Catalogue 1 - STAUFF Clamps

A www.stauff.com/1/en/#19 19 Clamp Body § Compact Design Type CC Product Features ƒ Only one clamp body required for two different hose diameters (compact hose + regular hose) ƒ Rotate upper clamp half by 180° and use clamp body to fasten compact hoses instead of regular hoses ƒ Available for three different combinations of outside hose diamaters ƒ Outer dimensions according to DIN 3015, Part 1 ƒ Effective cost reduction due to lower inventories Group Outside Diameter Outside Diameter Ordering Codes Dimensions (mm/in) STAUFF DIN Regular Hose Compact Hose (2ClampHalves) Ø D1 Ø D2 H (mm) (in) (mm) (in) ( QQ - Q = Material) L1 L2 RegularHose CompactHose B 3 3 19 .75 17,4 .69 319- QQ - Q -CC-BK 50 33 35,5 34 30 22,2 .87 20,6 .81 322.2- QQ - Q -CC-BK 1.97 1.30 1.40 1.34 1.18 25,4 1.00 23,7 .93 325.4- QQ - Q -CC-BK Additional outside diameters are available upon request. Please contact STAUFF for further information. Ordering Codes Clamp Body * 3 * 19- * PP-H-CC-BK One clamp body is consisting of two clamp halves. * STAUFF Group 3 * Outside diameter Ø D1 (mm) of regular hose 19 * Material code (see below) PP-H-CC-BK Clamp Body § Rectangular Design Type VK Special Materials Please contact STAUFF for further details on fire-proof clamp body materials, tested and approved according to several international fire-protection standards (such as BS 6853, EN 45545-2, UL 94 and many more). See pages 180 / 181 for material properties and technical information. Product Features ƒ Outer dimensions of clamp body according to Standard Series, STAUFF Group 5 ƒ For proximity switches according to DIN EN 60947-5-2 or similar, rectangular construction, with a square of 40mm x 40mm / 1.57 in x 1.57 in or 40mm x 36mm / 1.57 in x 1.42 in ƒ For proximity switches according to DIN EN 60947-5-2 or similar, round construction, please use Standard Series clamp body, STAUFF Group 4, with the diameter required (e.g. 430-PP) ƒ Use with Hexagon Rail Nut SM and Mounting Rail TS to provide axial and horizontal position adjustment by loosening the bolts Ordering Codes One clamp body is consisting of two clamp halves. Clamp Body 540-40-PP-VK Rectangular design with a square of 40mm x 40mm / 1.57 in x 1.57 in Clamp Body 540-36-PP-VK Rectangular design with a square of 40mm x 36mm / 1.57 in x 1.42 in Please replace PP by PA to order a clamp body made of Polyamide instead of Polypropylene. Standard Materials Polypropylene Colour: Black Material code: PP-H-CC-BK See pages 178 / 179 for material properties and technical information. For Use with Regular Hose For Use with Compact Hose (Upper Clamp Half rotated by 180°) H L2 L1 B Ø D1 H L2 L1 B Ø D2 Catalogue 1 § Edition 01/2024 Standard Series according to DIN 3015, Part 1