Catalogue 1 - STAUFF Clamps

154 www.stauff.com/1/en/#154 K Round Steel U-Bolt with Plastic Pipe Saddle (Long) Type RB+RUL Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Diameter Outside Diameter Nominal Dimensions ( mm / in ) Nominal Pipe / Tube Bore Ø D1 Pipe Round Steel U-Bolt (Type RB) DN (mm) (in) (in) A L1 H1 H2 H3 H4 Thread G 20 25 .98 30 40 73,5 41 30 17,5 M10 1.57 2.89 1.61 1.18 .69 26,9 1.06 3/4 1.18 40 73,5 41 30 18.5 M10 1.57 2.89 1.61 1.18 .73 25 30 1.18 38 48 81 48 30 20 M10 1.89 3.19 1.89 1.18 .79 33,7 1.33 1 1.50 48 81 48 30 22 M10 1.89 3.19 1.89 1.18 .87 32 38 1.50 46 56 89 48 30 24 M10 2.20 3.50 1.89 1.18 .94 42,4 1.69 1-1/4 1.81 56 89 48 30 26,2 M10 2.20 3.50 1.89 1.18 1.03 40 44,5 1.76 52 62 100 55 35 27,2 M10 2.44 3.94 2.17 1.38 1.07 48,3 1.90 1-1/2 2.05 62 100 55 35 29 M10 2.44 3.94 2.17 1.38 1.14 50 57 2.28 64 76 118 63 39 33,5 M12 2.99 4.65 2.48 1.54 1.32 60,3 2.41 2 2.52 76 118 63 39 35,2 M12 2.99 4.65 2.48 1.54 1.39 65 76,1 3.04 2-1/2 82 94 135 77 39 43 M12 3.23 3.70 5.31 3.03 1.54 1.69 80 88,9 3.56 3 94 106 152 82 39 54,5 M12 3.70 4.17 5.98 3.23 1.54 2.15 100 108 4.32 120 136 190 105 47 64 M16 5.35 7.48 4.13 1.85 2.52 114,3 4.57 4 4.72 136 190 105 47 67 M16 5.35 7.48 4.13 1.85 2.64 125 133 5.32 148 164 217 105 47 76,5 M16 6.46 8.54 4.13 1.85 3.01 139,7 5.59 5 5.83 164 217 105 47 80 M16 6.46 8.54 4.13 1.85 3.15 150 159 6.36 176 192 247 105 47 91,5 M16 7.56 9.72 4.13 1.85 3.60 168,3 6.73 6 6.93 192 247 105 47 96 M16 7.56 9.72 4.13 1.85 3.78 175 193,7 7.75 202 218 273 105 47 109 M16 7.96 8.58 10.75 4.13 1.85 4.29 200 216 8.64 228 248 311 125 55 120 M20 9.76 12.24 4.92 2.17 4.72 219,1 8.76 8 8.98 248 311 125 55 121,5 M20 9.76 12.24 4.92 2.17 4.78 250 267 10.68 282 303 364 125 55 145,5 M20 11.93 14.33 4.92 2.17 5.73 273 10.92 10 11.10 302 364 125 55 148,5 M20 11.89 14.33 4.92 2.17 5.85 300 318 12.72 332 352 418 125 55 174 M20 13.86 16.46 4.92 2.17 6.85 323,9 12.96 12 13.07 352 418 125 55 177 M20 13.86 16.46 4.92 2.17 6.97 350 355,6 14.22 14 378 402 475 145 63 193 M24 15.83 18.70 5.71 2.48 7.60 368 14.72 14.88 402 475 145 63 199 M24 15.83 18.70 5.71 2.48 7.83 400 406,4 16.26 16 428 452 526 145 63 218 M24 17.80 20.71 5.71 2.48 8.58 419 16.76 16.85 452 526 145 63 224,5 M24 17.80 20.71 5.71 2.48 8.84 500 508 20.32 20 530 554 627 145 63 269 M24 21.81 24.69 5.71 2.48 10.59 521 20.84 20.87 554 627 145 63 276 M24 21.81 24.69 5.71 2.48 10.87 Standard Materials for Plastic Pipe Saddles Polypropylene Colour: Green Material code: PP Polyamide Colour: Black Material code: PA See pages 178 / 179 for material properties and technical informa- tion. Alternative materials are available upon request. Please contact STAUFF for further information. Recommended Installation >DN50 Recommended Installation <DN50 H1 L1 H2 G H4 H3 A ø D1 Round Steel U-Bolt (type RB) with Plastic Pipe Saddle (type RUL) Ordering Codes Clamp Assembly * RB+RUL- * 48.3- * PP- * W1 One clamp assembly is consisting of one Round Steel U-Bolt (type RB), one Plastic Pipe Saddle (type RUL) and four Nuts (to DIN EN ISO 4032). * Clamp Assembly (as listed above) RB+RUL * Exact outside diameter Ø D1 (mm) 48.3 * Material of Pipe Saddle (see below) PP * Material code Carbon Steel, uncoated W1 Carbon Steel, zinc-plated, blue-chromated W32 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 Please note: All items are supplied non-assembled. Catalogue 1 § Edition 01/2024 Flat Steel and Round Steel U-Bolt Clamps Applications ƒ Standing or hanging installation of pipes and tubes on beams, profiles and consoles ƒ Design with two threaded ends allows for ideal adaptation to suit the exact outer diameter of the pipe or tube