Catalogue 1 - STAUFF Clamps

www.stauff.com/1/en/#151 K 151 Flat Steel U-Bolt with Plastic Pipe Saddle (Short) and U-Profile (To be used as Fixed Point Clamps only) Type FB+RUK Ordering Codes Flat Steel U-Bolt * FB- * A-48.3- * W1 * Flat Steel U-Bolt FB * Exact outside diameter Ø D1 (mm) A-48.3 * Material code Carbon Steel, uncoated W1 Carbon Steel, zinc-plated, blue-chromated W32 Stainless Steel V4A 1.4401 / 1.4571 (AISI 316 / 316 Ti) W5 only Plastic Pipe Saddle * RUK- * 48.3- * PP * Plastic Pipe Saddle (Short) RUK * Exact outside diameter Ø D1 (mm) 48.3 * Material of Pipe Saddle (see below) PP Please note: All items are supplied assembled. Standard Materials for Plastic Pipe Saddles Polypropylene Colour: Green Material code: PP Polyamide Colour: Black Material code: PA See pages 178 / 179 for material properties and technical informa- tion. Alternative materials are available upon request. Please contact STAUFF for further information. H6 L3 H5 L4 B3 D2 H7 Plastic Pipe Saddle (type RUK) (For size DN 40, dimension L4 is staggered by 90°) Diameter Outside Diameter Nominal Dimensions ( mm / in ) Nominal Pipe / Tube Bore Hexagon Head Bolt Ø D1 Pipe Plastic Pipe Saddle (type RUK) (DINEN ISO4014/4017) DN (mm) (in) (in) L3 L4 B3 D2 H5 H6 H7 Thread G x L 40 48,3 1.93 1-1/2 24 25 35 8 5 8 5 M10 x 40 .94 .98 1.38 .31 .20 .31 .20 50 57 2.28 38 25 50 10 5 10 6 M10 x 40 1.50 .98 1.97 .39 .20 .39 .24 60,3 2.41 2 38 25 50 10 5 10 6 M10 x 40 1.50 .98 1.97 .39 .20 .39 .24 65 76,1 3.04 2-1/2 38 25 50 10 5 10 6 M10 x 40 1.50 .98 1.97 .39 .20 .39 .24 80 88,9 3.56 3 75 40 70 15 8 17 10 M 12 x 55 2.95 1.57 2.76 .59 .31 .67 .39 100 108 4.32 75 40 70 15 8 17 10 M 12 x 55 2.95 1.57 2.76 .59 .31 .67 .39 114,3 4.57 4 75 40 70 15 8 17 10 M 12 x 55 2.95 1.57 2.76 .59 .31 .67 .39 125 133 5.32 75 40 70 15 8 17 10 M 12 x 55 2.95 1.57 2.76 .59 .31 .67 .39 139,7 5.59 5 75 40 70 15 8 17 10 M 12 x 55 2.95 1.57 2.76 .59 .31 .67 .39 150 159 6.36 140 90 75 25 8 26 10 M 16 x 75 5.51 3.54 2.95 .98 .31 1.02 .39 168,3 6.73 6 140 90 75 25 8 26 10 M 16 x 75 5.51 3.54 2.95 .98 .31 1.02 .39 175 193,7 7.75 140 90 75 25 8 26 10 M 16 x 75 5.51 3.54 2.95 .98 .31 1.02 .39 200 216 8.64 140 90 75 25 8 26 10 M 16 x 75 5.51 3.54 2.95 .98 .31 1.02 .39 219,1 8.76 8 140 90 75 25 8 26 10 M 16 x 75 5.51 3.54 2.95 .98 .31 1.02 .39 250 267 10.68 140 90 75 25 8 26 10 M 20 x 80 5.51 3.54 2.95 .98 .31 1.02 .39 273 10.92 10 140 90 75 25 8 26 10 M 20 x 80 5.51 3.54 2.95 .98 .31 1.02 .39 300 318 12.72 220 150 75 30 8 32 10 M 20 x 80 8.66 5.91 2.95 1.18 .31 1.26 .39 323,9 12.96 12 220 150 75 30 8 32 10 M 20 x 80 8.66 5.91 2.95 1.18 .31 1.26 .39 350 355,6 14.22 14 220 150 75 30 8 32 10 M 24 x 100 8.66 5.91 2.95 1.18 .31 1.26 .39 368 14.72 220 150 75 30 8 32 10 M 24 x 100 8.66 5.91 2.95 1.18 .31 1.26 .39 400 406,4 16.26 16 220 150 75 30 8 32 10 M 24 x 100 8.66 5.91 2.95 1.18 .31 1.26 .39 419 16.76 220 150 75 30 8 32 10 M 24 x 100 8.66 5.91 2.95 1.18 .31 1.26 .39 457 18.28 18 220 150 75 30 8 32 10 M 24 x 100 8.66 5.91 2.95 1.18 .31 1.26 .39 500 508 20.32 20 220 150 75 30 8 32 10 M 24 x 100 8.66 5.91 2.95 1.18 .31 1.26 .39 521 20.84 220 150 75 30 8 32 10 M 24 x 100 8.66 5.91 2.95 1.18 .31 1.26 .39 L G Hexagon Head Bolt AS (according to DIN EN ISO 4014 / 4017) Alternative materials and surface finishings are available upon request. Contact STAUFF for further information. Catalogue 1 § Edition 01/2024 Flat Steel and Round Steel U-Bolt Clamps Applications ƒ Standing or hanging installation of pipes and tubes on beams, profiles and consoles ƒ Design with two threaded ends allows for ideal adaptation to suit the exact outer diameter of the pipe or tube

RkJQdWJsaXNoZXIy ODUyNzU=